On Fri, Oct 24, 2014 at 09:42:28AM -1000, Elton Wilson wrote: > On Mon, Oct 13, 2014 at 6:23 PM, Scott Lambert > <[email protected]> wrote: > > > On Mon, Oct 13, 2014 at 04:44:06PM -1000, Elton Wilson wrote: > > > We have a 10mile link that sees about 150mb download at peak > > > time. Its been running solid for over 2 months. We had an Airfiber > > > link there that was doing well, but because we may loose power to > > > one side we decided to try the RocketAC since it uses a lot less > > > power (watts). > > > > What channel width? 40MHz? > > > > > 6 weeks ago we swapped out an RM5 link (well one side was a Power > > > Bridge) with 2 rocket ACs. That link sees almost 120mb peak > > > time. Haven't had one issue out of it either. I just received 4 > > > Nanobridge ACs but we haven't deployed any yet. > > > > Channel width? 40MHz? > > We have the 10 mile link on 50mhz now, but it was fine on 40mhz for a > month. Our other link is on 1.5 miles and its on 40mhz.
We had another incident with 7.0.3-u1 last night, Oct 23rd. It was passing about 50% of the packets. Maybe less. I could not access the station end. We got screenshots and support output from the AP end this time. The problem lasted about 12 minutes. Sriram thinks the devel image he sent me on the 14th with rate control fixes will resolve the problem. We hadn't swapped before because we were not seeing recurrence of the problem. We are going to load it tonight. The last problem was Oct 11th. -- Scott Lambert KC5MLE Unix SysAdmin [email protected] _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
