Just check what the current firmware version is - it should start with either 
XM or XW (like XM.v5.5.8 or XW.v5.5.8) and use the same. it's most likely going 
to be XM... and if you do try using the wrong one, it won't actually flash.

________________________________
From: [email protected] [[email protected]] on behalf of 
Eduardo [[email protected]]
Sent: Tuesday, October 28, 2014 6:53 AM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] FCC regulation Part 15.407 (a)(2), (h)(2) question

I want to upgrade firmware in the RocketM5 radios to 5.5.10 and I got the  
XM.v5.5.10 and the XW.v5.5.10 from UBNT website; which one should I use?

----- Original Message -----
From: Mathew Howard<mailto:[email protected]>
To: Ubiquiti Users Group<mailto:[email protected]>
Sent: Monday, October 27, 2014 11:02 AM
Subject: Re: [Ubnt_users] FCC regulation Part 15.407 (a)(2), (h)(2) question

If you're using older Rockets, you'll need to request an activation code and 
new FCCID labels from UBNT, and be on firmware that (legally) supports DFS. If 
the Rockets are relatively new, just make sure the EIRP doesn't exceed 30dBm 
and you should be fine.

Also, 5150-5250mhz can be used with Rocket M5s on airOS 5.5.10, and that does 
allow a bit higher power (36dBm EIRP), so that may work better if the links are 
longer.

________________________________
From: [email protected] [[email protected]] on behalf of 
Eduardo [[email protected]]
Sent: Sunday, October 26, 2014 9:28 AM
To: Ubiquiti Users Group
Subject: [Ubnt_users] FCC regulation Part 15.407 (a)(2), (h)(2) question

How are you guys doing the DFS and radar detection in compliance with the FCC 
regulation when using DFS in the RocketM5 radios?

We've several links with RocketM5 and the environment is getting polluted in 
the 5725-5850 spectrum and we're considering using DFS.

Thanks,
Eduardo


________________________________

_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to