basically we used grids to keep wind load down. both grids took some ice this morning but one is performing better than the other. ran into this last winter as well. so, trying to force the same data out both chains (instead of using mimo) which last year worked when selecting mcs-7 (someone here taught me that)
not working this year. won't pass any traffic at all although it will link up. ----- Original Message ----- From: Josh Luthman To: Ubiquiti Users Group Sent: Monday, November 17, 2014 2:10 PM Subject: Re: [Ubnt_users] bad chain on rocket - why isn't this working The polarity/chain you're trying to use is the one that's broken? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Nov 17, 2014 at 2:51 PM, CBB - Jay Fuller <[email protected]> wrote: Have a situation where i have a bad chain on a rocket. Usually can swap to MCS7 and send the same data out both sides but today, they'll link up, but they won't pass any traffic and won't even show a CCQ #. What am I doing wrong? I've unchecked auto from both sides and set them both for MCS7. Thanks. _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users ------------------------------------------------------------------------------ _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
