iPerf is not included with airFiber as it isn't needed. What it tells you the channel capacity is is what the channel capacity is.
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "RickG" <[email protected]> To: "Ubiquiti Users Group" <[email protected]> Sent: Monday, December 1, 2014 2:48:52 PM Subject: Re: [Ubnt_users] Speed test no working Is there a trick to getting iperf to work on AirFiber? On Sun, Nov 16, 2014 at 4:01 PM, Adair Winter < [email protected] > wrote: I usually just SSH to the client radio/far side, run iperf -s then go to one of my servers in the data center and run iperf -c (client IP) -P5 works better than the web interface anyway On Sun, Nov 16, 2014 at 2:33 PM, Daniel Peoples < [email protected] > wrote: <blockquote> For speedtests I actually have a 5 year old bullet m5 in my NOC with the wlan disabled on the latest firmware, it has to be rebooted about once a month for it to work. Also, I don't know when they changed it, but for some reason the results of the speedtests(which I thought were UDP) are actually what I can real world get with TCP on that same circuit. Anyone know whats up with this? I have tested from several different points in our network with a variety of backhauls to that bulletm5 and get real world TCP speeds now a days. Daniel Peoples Resonance Broadband Resonancebroadband.com 918-429-36 20 On Sun, Nov 16, 2014 at 2:25 PM, Tim Kerns < [email protected] > wrote: <blockquote> Not so easy to do....if you have, like me,some bullets or air grids.... then they can not have anything above 5.3 because you lose DFS. These were not re-certified by UBNT. :0 From: Rory Conaway Sent: Sunday, November 16, 2014 12:02 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Speed test no working Just get everything on 5.5.10. No reason not to. Rory From: [email protected] [mailto: [email protected] ] On Behalf Of Jerry Richardson (airCloud) Sent: Sunday, November 16, 2014 12:01 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Speed test no working We have noticed that if the SW versions don't match it will not work. On Sun, Nov 16, 2014 at 10:49 AM, Daniel Peoples < [email protected] > wrote: This is something that has been an issue since 5.5 as far as I know. On Nov 16, 2014 11:18 AM, "Paul Conlin" < [email protected] > wrote: Is there a fix for this? A workaround besides rebooting? We are on 5.5.8. Should we move up to 5.5.10? PC Blaze Broadband From: [email protected] [mailto: [email protected] ] On Behalf Of Daniel and Regina Peoples Sent: Tuesday, March 4, 2014 8:57 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Speed test no working This is a "Feature" of 5.5+ IIRC 5.3.5 didn't have this issue. Daniel Peoples Resonance Broadband Resonancebroadband.com 918-429-3620 On Tue, Mar 4, 2014 at 7:53 PM, RickG < [email protected] > wrote: Well, 5.5.4 sucks... On Tue, Mar 4, 2014 at 4:59 PM, Eduardo < [email protected] > wrote: Is this issue related to the firmware version? Eduardo <blockquote> ----- Original Message ----- From: Matt Hoppes To: Ubiquiti Users Group Sent: Tuesday, March 04, 2014 4:49 PM Subject: Re: [Ubnt_users] Speed test no working Reboot both radios -- there's some kind of a memory leak/issue. Matt Hoppes Director of Information Technology Indigo Wireless +1 (570) 723-7312 On 3/4/14, 4:48 PM, Eduardo wrote: > I'm trying to run a speed test from a station in a PtP link, and got > this message: > > Error: Specified device is not > compatible for speedtest. > > Both radios are BulletM5 with v5.5.4. I got the same error when tried in > a link with RocketM365 in both ends and v5.5.6. > > Also I've tried in a PtoP connection also with Bullets, but M2 and > v.5.5.6 with the same result. > > The issue is always running the speed test from the station to the AP. > > Have you guys seen this issue? > > Any suggestions on how I can fix it. > > Thanks, > Eduardo > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users </blockquote> _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users </blockquote> -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users </blockquote> -- -RickG KyWiFi _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
