I would hope that the switch will actually handle the capacity... it's just that the management interface won't, so your tests are going to be wrong.
________________________________ From: [email protected] [[email protected]] on behalf of RickG [[email protected]] Sent: Monday, December 01, 2014 3:40 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Speed test no working Confirmed. I just ran IPerf from one TS8 to another TS8 and just get around 100MBps! I'm going to move them to a tower with less traffic then. Now what do I use for a higher capacity switch? I hate to put a high dollar switch in a rough environment. On Mon, Dec 1, 2014 at 4:29 PM, Josh Reynolds <[email protected]<mailto:[email protected]>> wrote: Toughswitches are fundamentally broken and we have been pulling them off our network. If you need more info, there's like a 25 page thread on the Ubiquiti forum. Also, you can't use them to generate much traffic as everything will be done by the management cpu/interface, which is 100Mb. josh reynolds :: chief information officer spitwspots :: www.spitwspots.com<http://www.spitwspots.com> On 12/01/2014 12:11 PM, RickG wrote: Agreed. Just wanted to confirm. Will have to chase the problem down! On Mon, Dec 1, 2014 at 4:07 PM, Josh Luthman <[email protected]<mailto:[email protected]>> wrote: You should be getting 770 megs on a test in either direction (even at the same time!) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 1, 2014 at 4:06 PM, RickG <[email protected]<mailto:[email protected]>> wrote: ToughSwitches on both ends on gigabit ports. I thought maybe laptop was maxed out until I ran IPerf from TS8 to TS8. On Mon, Dec 1, 2014 at 4:02 PM, Josh Luthman <[email protected]<mailto:[email protected]>> wrote: 100 megabit switch between laptop and Airfiber? Is it linked at gig? Is your laptop's CPU maxed out? Josh Luthman Office: 937-552-2340<tel:937-552-2340> Direct: 937-552-2343<tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 1, 2014 at 4:00 PM, RickG <[email protected]<mailto:[email protected]>> wrote: It might be the capacity but when I test I only get around 100Mbps. On Mon, Dec 1, 2014 at 3:50 PM, Mike Hammett <[email protected]<mailto:[email protected]>> wrote: iPerf is not included with airFiber as it isn't needed. What it tells you the channel capacity is is what the channel capacity is. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ________________________________ From: "RickG" <[email protected]<mailto:[email protected]>> To: "Ubiquiti Users Group" <[email protected]<mailto:[email protected]>> Sent: Monday, December 1, 2014 2:48:52 PM Subject: Re: [Ubnt_users] Speed test no working Is there a trick to getting iperf to work on AirFiber? On Sun, Nov 16, 2014 at 4:01 PM, Adair Winter <[email protected]<mailto:[email protected]>> wrote: I usually just SSH to the client radio/far side, run iperf -s then go to one of my servers in the data center and run iperf -c (client IP) -P5 works better than the web interface anyway On Sun, Nov 16, 2014 at 2:33 PM, Daniel Peoples <[email protected]<mailto:[email protected]>> wrote: For speedtests I actually have a 5 year old bullet m5 in my NOC with the wlan disabled on the latest firmware, it has to be rebooted about once a month for it to work. Also, I don't know when they changed it, but for some reason the results of the speedtests(which I thought were UDP) are actually what I can real world get with TCP on that same circuit. Anyone know whats up with this? I have tested from several different points in our network with a variety of backhauls to that bulletm5 and get real world TCP speeds now a days. Daniel Peoples Resonance Broadband Resonancebroadband.com<http://Resonancebroadband.com> 918-429-3620 On Sun, Nov 16, 2014 at 2:25 PM, Tim Kerns <[email protected]<mailto:[email protected]>> wrote: Not so easy to do....if you have, like me,some bullets or air grids.... then they can not have anything above 5.3 because you lose DFS. These were not re-certified by UBNT. :0 From: Rory Conaway<mailto:[email protected]> Sent: Sunday, November 16, 2014 12:02 PM To: Ubiquiti Users Group<mailto:[email protected]> Subject: Re: [Ubnt_users] Speed test no working Just get everything on 5.5.10. No reason not to. Rory From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Jerry Richardson (airCloud) Sent: Sunday, November 16, 2014 12:01 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Speed test no working We have noticed that if the SW versions don't match it will not work. On Sun, Nov 16, 2014 at 10:49 AM, Daniel Peoples <[email protected]<mailto:[email protected]>> wrote: This is something that has been an issue since 5.5 as far as I know. On Nov 16, 2014 11:18 AM, "Paul Conlin" <[email protected]<mailto:[email protected]>> wrote: Is there a fix for this? A workaround besides rebooting? We are on 5.5.8. Should we move up to 5.5.10? PC Blaze Broadband From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Daniel and Regina Peoples Sent: Tuesday, March 4, 2014 8:57 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Speed test no working This is a "Feature" of 5.5+ IIRC 5.3.5 didn't have this issue. Daniel Peoples Resonance Broadband Resonancebroadband.com<http://Resonancebroadband.com> 918-429-3620<tel:918-429-3620> On Tue, Mar 4, 2014 at 7:53 PM, RickG <[email protected]<mailto:[email protected]>> wrote: Well, 5.5.4 sucks... On Tue, Mar 4, 2014 at 4:59 PM, Eduardo <[email protected]<mailto:[email protected]>> wrote: Is this issue related to the firmware version? Eduardo ----- Original Message ----- From: Matt Hoppes<mailto:[email protected]> To: Ubiquiti Users Group<mailto:[email protected]> Sent: Tuesday, March 04, 2014 4:49 PM Subject: Re: [Ubnt_users] Speed test no working Reboot both radios -- there's some kind of a memory leak/issue. Matt Hoppes Director of Information Technology Indigo Wireless +1 (570) 723-7312<tel:%2B1%20%28570%29%20723-7312> On 3/4/14, 4:48 PM, Eduardo wrote: > I'm trying to run a speed test from a station in a PtP link, and got > this message: > > Error: Specified device is not > compatible for speedtest. > > Both radios are BulletM5 with v5.5.4. I got the same error when tried in > a link with RocketM365 in both ends and v5.5.6. > > Also I've tried in a PtoP connection also with Bullets, but M2 and > v.5.5.6 with the same result. > > The issue is always running the speed test from the station to the AP. > > Have you guys seen this issue? > > Any suggestions on how I can fix it. > > Thanks, > Eduardo > > > > _______________________________________________ > Ubnt_users mailing list > [email protected]<mailto:[email protected]> > http://lists.wispa.org/mailman/listinfo/ubnt_users > _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users ________________________________ _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071<tel:806.316.5071> C: 806.231.7180<tel:806.231.7180> http://www.amarillowireless.net _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
