I'm saying those ports won't work if the management interface doesn't work. In my case, my switches failed to respond to the management interface and the non-management ports stopped working as well (they did pass voltage, no eth link IIRC)
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Dec 4, 2014 at 2:37 PM, Rory Conaway <r...@triadwireless.net> wrote: > Are you saying the TS-5/8 units can’t handle 1Gbps on the ports? > > > > Rory > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *Josh Luthman > *Sent:* Thursday, December 4, 2014 11:22 AM > > *To:* Ubiquiti Users Group > *Subject:* Re: [Ubnt_users] Speed test no working > > > > No it doesn't... That's the real problem. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Dec 4, 2014 12:52 PM, "RickG" <rgunder...@gmail.com> wrote: > > About ToughSwitches: Should I assume as long as you dont use the > management interface the unit will function fine as a gigabit switch? > > > > On Mon, Dec 1, 2014 at 4:32 PM, Josh Reynolds <j...@spitwspots.com> wrote: > > Hardware, but management interface/cpu is only 100Mbps link internally. > > josh reynolds :: chief information officer > > spitwspots :: www.spitwspots.com > > On 12/01/2014 12:30 PM, Josh Luthman wrote: > > Are TS software or hardware switched? > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Mon, Dec 1, 2014 at 4:29 PM, RickG <rgunder...@gmail.com> wrote: > > I know but I actually get a touch above 100 - like 104-106... > > > > On Mon, Dec 1, 2014 at 4:14 PM, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > A 100 meg limit sounds like a 100 BaseT problem to me, but who knows! > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Mon, Dec 1, 2014 at 4:11 PM, RickG <rgunder...@gmail.com> wrote: > > Agreed. Just wanted to confirm. Will have to chase the problem down! > > > > On Mon, Dec 1, 2014 at 4:07 PM, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > You should be getting 770 megs on a test in either direction (even at the > same time!) > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Mon, Dec 1, 2014 at 4:06 PM, RickG <rgunder...@gmail.com> wrote: > > ToughSwitches on both ends on gigabit ports. I thought maybe laptop was > maxed out until I ran IPerf from TS8 to TS8. > > > > On Mon, Dec 1, 2014 at 4:02 PM, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > 100 megabit switch between laptop and Airfiber? Is it linked at gig? Is > your laptop's CPU maxed out? > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Mon, Dec 1, 2014 at 4:00 PM, RickG <rgunder...@gmail.com> wrote: > > It might be the capacity but when I test I only get around 100Mbps. > > > > On Mon, Dec 1, 2014 at 3:50 PM, Mike Hammett <wispaubntus...@ics-il.net> > wrote: > > iPerf is not included with airFiber as it isn't needed. What it tells you > the channel capacity is is what the channel capacity is. > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > > ------------------------------ > > *From: *"RickG" <rgunder...@gmail.com> > *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org> > *Sent: *Monday, December 1, 2014 2:48:52 PM > > > *Subject: *Re: [Ubnt_users] Speed test no working > > Is there a trick to getting iperf to work on AirFiber? > > > > On Sun, Nov 16, 2014 at 4:01 PM, Adair Winter <ada...@amarillowireless.net> > wrote: > > I usually just SSH to the client radio/far side, run iperf -s then go to > one of my servers in the data center and run iperf -c (client IP) -P5 > > works better than the web interface anyway > > > > > > On Sun, Nov 16, 2014 at 2:33 PM, Daniel Peoples <dpe...@gmail.com> wrote: > > For speedtests I actually have a 5 year old bullet m5 in my NOC with the > wlan disabled on the latest firmware, it has to be rebooted about once a > month for it to work. > > Also, I don't know when they changed it, but for some reason the results > of the speedtests(which I thought were UDP) are actually what I can real > world get with TCP on that same circuit. Anyone know whats up with this? I > have tested from several different points in our network with a variety of > backhauls to that bulletm5 and get real world TCP speeds now a days. > > > *Daniel Peoples* > Resonance Broadband > > *Resonancebroadband.com* <http://Resonancebroadband.com> > 918-429-3620 > > > > On Sun, Nov 16, 2014 at 2:25 PM, Tim Kerns <t...@cv-access.com> wrote: > > Not so easy to do....if you have, like me,some bullets or air grids.... > then they can not have anything above 5.3 because you lose DFS. > > > > These were not re-certified by UBNT. > > > > :0 > > > > > > *From:* Rory Conaway <r...@triadwireless.net> > > *Sent:* Sunday, November 16, 2014 12:02 PM > > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > > *Subject:* Re: [Ubnt_users] Speed test no working > > > > Just get everything on 5.5.10. No reason not to. > > > > Rory > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *Jerry Richardson (airCloud) > *Sent:* Sunday, November 16, 2014 12:01 PM > *To:* Ubiquiti Users Group > *Subject:* Re: [Ubnt_users] Speed test no working > > > > We have noticed that if the SW versions don't match it will not work. > > > > On Sun, Nov 16, 2014 at 10:49 AM, Daniel Peoples <dpe...@gmail.com> wrote: > > This is something that has been an issue since 5.5 as far as I know. > > On Nov 16, 2014 11:18 AM, "Paul Conlin" <pcon...@blazebroadband.com> > wrote: > > Is there a fix for this? A workaround besides rebooting? We are on > 5.5.8. Should we move up to 5.5.10? > > > > PC > > Blaze Broadband > > > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *Daniel and Regina Peoples > *Sent:* Tuesday, March 4, 2014 8:57 PM > *To:* Ubiquiti Users Group > *Subject:* Re: [Ubnt_users] Speed test no working > > > > This is a "Feature" of 5.5+ IIRC 5.3.5 didn't have this issue. > > > *Daniel Peoples* > Resonance Broadband > > *Resonancebroadband.com* <http://Resonancebroadband.com> > 918-429-3620 > > > > On Tue, Mar 4, 2014 at 7:53 PM, RickG <rgunder...@gmail.com> wrote: > > Well, 5.5.4 sucks... > > > > On Tue, Mar 4, 2014 at 4:59 PM, Eduardo <edua...@webjogger.net> wrote: > > Is this issue related to the firmware version? > > > > Eduardo > > > > ----- Original Message ----- > > *From:* Matt Hoppes <mhop...@indigowireless.com> > > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > > *Sent:* Tuesday, March 04, 2014 4:49 PM > > *Subject:* Re: [Ubnt_users] Speed test no working > > > > Reboot both radios -- there's some kind of a memory leak/issue. > > > Matt Hoppes > Director of Information Technology > Indigo Wireless > +1 (570) 723-7312 > > On 3/4/14, 4:48 PM, Eduardo wrote: > > I'm trying to run a speed test from a station in a PtP link, and got > > this message: > > > > Error: Specified device is not > > compatible for speedtest. > > > > Both radios are BulletM5 with v5.5.4. I got the same error when tried in > > a link with RocketM365 in both ends and v5.5.6. > > > > Also I've tried in a PtoP connection also with Bullets, but M2 and > > v.5.5.6 with the same result. > > > > The issue is always running the speed test from the station to the AP. > > > > Have you guys seen this issue? > > > > Any suggestions on how I can fix it. > > > > Thanks, > > Eduardo > > > > > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > -- > -RickG KyWiFi > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > ------------------------------ > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > -- > > Adair Winter > VP, Network Operations / Owner > Amarillo Wireless | 806.316.5071 > C: 806.231.7180 > http://www.amarillowireless.net > > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > -- > > -RickG KyWiFi > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > -- > > -RickG KyWiFi > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > -- > > -RickG KyWiFi > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > -- > > -RickG KyWiFi > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > -- > > -RickG KyWiFi > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > -- > > -RickG KyWiFi > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users