Hi Andris, Yes, 3.7.9 is the latest release, and you can use it with 4.8.14. It should be better for both OD+ and PicoM2 than 3.3.x, and earlier 3.7.x releases.
We will have 3.7.10 available in the near future, which fixes an issue with AC-Lite/LR negotiation on some switches, UAP-IW (it doesn't broadcast). It also fixes an issue with ZH, if that is something you use. Other than ZH, these wouldn't affect the devices you mention.. Cheers, Mike On Tue, Aug 9, 2016 at 12:06 PM, Andris Bjornson <[email protected]> wrote: > Hi all > > I only recently became aware of the thread http://community.ubnt. > com/t5/UniFi-Wireless/Connectivity-Problems-UAP-UAP- > LR-UAP-Pro-UAP-Outdoor5-UAP/m-p/1643485#M175948 regarding what looks like > bugs introduced into the wireless driver of recent UAP builds. > > I have been fighting intermittent and hard to troubleshoot issues like > what's described in the thread for a while now (users sometimes connect > with good wifi, but can't reach LAN or WAN). I only just stumbled onto the > thread > > I'm finding somewhat inconsistent information in the threads and I was > hoping someone here could give me advice on what's most likely to result in > stability: > > Here is my situation: > 1) Intermittently experiencing the symptoms described on some aps: good > wifi signal, but unable to access LAN/WAN > 2) Running 4.8.14 UniFi controller, and don't currently want to upgrade to > 5.x controller. I don't need new features right now. > 3) Operating about 50 Outdoor+ and PicoM2 unifi units, currently on > primarily 3.3.19.4015 with a few on 3.3.22.4024 that I upgraded trying to > solve this problem before i found this thread. > > I think I understand that the recommendation is to try the beta firmware > here: http://community.ubnt.com/t5/UniFi-Wireless-Beta/QCA-UAP- > Test-firmware-Please-see-inside/td-p/163210... > > Although later in that thread I see a recommendation from @UBNT-Brandon > to use the firmware from 5.2.2 beta instead? ( > http://community.ubnt.com/t5/UniFi-Wireless-Beta/QCA-UAP- > Test-firmware-Please-see-inside/m-p/1641047...) > > Is this saying I can and should use 3.7.9.5089 firmware from > http://community.ubnt.com/t5/UniFi-Beta-Blog/UniFi-5-2-2- > is-released-for-testing/ba-p/1638878 with my 4.8.14 controller? > > > Any help and guidance greatly appreciated! > > Andris > > --- > Andris Bjornson | EveryLayer <http://www.everylayer.com/> > skype: andris.bjornson > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- Mike Dudgeon Ubiquiti Networks, Inc. <http://www.ubnt.com/> [image: Ubiquiti Networks, Inc] <http://www.ubnt.com>
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
