Is this SETI?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Fri, Aug 26, 2016 at 4:10 PM, Chris Soiles <[email protected]> wrote:

> I drive by this at least 3 times a month
>
> And one of my customers is the head of the facility
>
> Sent from iPhone 6S Plus
>
> Chris Soiles
> Owner
> Rio Cities
> [email protected]
> 505-966-6389
>
> On Aug 26, 2016, at 2:07 PM, alex phillips <[email protected]>
> wrote:
>
> Here is a neighborhood we upgraded to AC.   We have full modulation on all
> of them
>
> <image.png>
>
> *Alex Phillips*
> CEO and General Manager
> RBNS.net <http://rbns.net>
> HighSpeedLink.net <http://highspeedlink.net>
> *WISPA.org <http://wispa.org> Board of Directors ** (2011-2017)*
> *WISPA President (2015-2017)*
> *540-908-3993 <540-908-3993>*
>
> On Fri, Aug 26, 2016 at 3:16 PM, Phil Curnutt <[email protected]> wrote:
>
>> Steve,  If you are contemplating replacing your M5 radios with AC radio
>> of the same antenna gain you may want to consider that you need another 10
>> dB of gain with the AC's for full modulation, -65dB is required for AC
>> rather then the -75 required for M5.  Also, another consideration is the
>> modulation rate is also dependent on the CINR, a calculation of the
>> difference between the Rx signal and the noise plus interference.  A CINR
>> of 25db or better, 30 being optimum, will give you full modulation if your
>> Rx signal is -65 or better.  So, those bigger dishes may be what you want.
>> We have found that anything over 1.5 miles requires a PBE-5AC-620, or
>> larger, for full modulation when the noise floor is below -90dB.  If your
>> noise floor is in the 80's, 6X is probably as good as you'll get.
>>
>> Phil
>>
>> On Fri, Aug 26, 2016 at 12:36 PM, Shawn Burgei <[email protected]>
>> wrote:
>>
>>> Do all AC CPE have to be at the beta 6 to connect to AC prism with beta
>>> 8?
>>>
>>> Sent from my iPhone
>>>
>>> On Aug 26, 2016, at 2:01 PM, J Portman <[email protected]> wrote:
>>>
>>> Running beta 8 on the prism and beta 6 on the cpe you can use any M
>>> radio as a client. Powerbeam M, Nanobridge M and Nanostation M are all
>>> working for us in this manner.
>>>
>>> We are doing precisely this as we get ready to transition a large number
>>> of people onto the AC product.
>>>
>>> YMMV,
>>> JP
>>>
>>>
>>> *On Fri, 26 Aug 2016 12:45:54 -0400, Clay Stewart wrote*
>>> >  LBE‑5AC‑23 ?
>>> >
>>> > On Thu, Aug 25, 2016 at 8:37 AM, Steve Barnes <[email protected]>
>>> wrote:
>>> >
>>>>
>>>> What can you use as a station with the 5ACPrism that is in stock and
>>>> bigger than the AC19s?  The PB5AC-400 are backordered FOREVER.
>>>> >
>>>> > Is there other cheaper Dish and radio combos that would work.
>>>> >
>>>> > Steve Barnes
>>>> > Wireless Operations Manager
>>>> > PCSWIN.COM <http://pcswin.com/>
>>>> > NLBC.COM <http://nlbc.com/>
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > Ubnt_users mailing list
>>>> > [email protected]
>>>> > http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>> >
>>>> >
>>>
>>>
>>> >
>>>
>>> >
>>> > --
>>> >
>>> > --
>>> > Clay Stewart, COO/CTO
>>> > SCS Broadband
>>> > A Division of Acelanet, LLC
>>> >   434.263.6363 O
>>> >   434.942.6510 C
>>> >   [email protected] <[email protected]>
>>> > [UTF-8?]“We Keep You Up and [UTF-8?]Runningâ€
>>> >
>>> > Please send sales inquiries to [email protected]
>>> > Please send service/repair requests to [email protected]
>>>
>>>
>>> Joe Portman
>>> Alamo Broadband Inc.
>>> www.alamobroadband.com
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> [email protected]
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> [email protected]
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>
>> _______________________________________________
>> Ubnt_users mailing list
>> [email protected]
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
> _______________________________________________
> Ubnt_users mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
> _______________________________________________
> Ubnt_users mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to