We loaded XW firmware on them as all new radios are xx hardware. I've
certainly seen the error when loading the incorrect firmware from the
GUI. We did not get that error. It also doesn't explain the issue of
it telling us incorrect default password when we initially tried to
change the password.
Doug
SkyValleyNetwork
On 10/10/2016 11:44 AM, Joey Craig wrote:
XM vs XW firmware?
On Oct 10, 2016 1:07 PM, "Doug" <[email protected]
<mailto:[email protected]>> wrote:
We received a batch of 10 NanoStation M2s with 5.6.2 firmware on
them. When we programmed them up and tried changing the default
password it told us we had the incorrect default password. We
tried upgrading the firmware to 5.6.9 but after upgrading we were
no longer able to get to the radio at all. We were able to put
the radio in TFTP mode however when we loaded the firmware we
received a server error. This has been the case with all 10
radios. Any suggestions for what to try?
Doug
Sky Valley Network
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>
_______________________________________________ Ubnt_users mailing
list [email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
