very low noise, -90dbm and only one ssid available, mine. tried beta fw 1.6, still does the problem 1/130Mbps. Very difficult to login, navigate. Logs disappear after reboot, who thought of doing that should be shot! After reboot, problem re-occurred within 1 minute and then nanobeam would not reboot after unplugging. Several hours later it started working again. Is this a defective unit or is this a bug?
Jan V On 10/26/2016 01:27 PM, Ethan E. Dee wrote: > What is the noise level of both sides? > Look at airview or see what SSID's are available for selection > > On 10/26/2016 04:26 PM, OOLLC-Support wrote: >> am having an issue with a few nanobeam m2 (little moon shaped things). >> As looked at on the main tab the TX/RX goes to 1/130 Mbs and sticks >> there, customer calls and complains about no internet. Have to power >> cycle it to get it working again. All other CPEs off same tower working >> fine which are mostly nanostation or airgrid models. Upgrade to 5.6.9 >> does not help. >> > > _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
