Re: [Ubnt_users] Powerbeam M5s unable to update firmware

Tue, 15 Nov 2016 11:31:12 -0800

Have you tried doing the TFTP recovery mode with the updated firwmare?

Jesse DuPont

Network Architect
email: [email protected]
Celerity Networks LLC

Celerity Broadband LLC
Like us! facebook.com/celeritynetworksllc

Like us! facebook.com/celeritybroadband

On 11/15/16 10:55 AM, Chris Fabien wrote:
The last one that failed was on XW5.5.6 and we tried to upgrade to XW5.6.3 and XW5.6.9. I think some of the others had come in with XW5.6.2. on them. 



On Tue, Nov 15, 2016 at 12:43 PM, Ethan E. Dee <[email protected]> wrote:

What version are you on?
What versions have you tried upgrading too?


On 11/15/2016 12:27 PM, Chris Fabien wrote:
We are seeing a lot of failures on new powerbeams that we are unable to update the firmware. The will appear to take the update but after rebooting they are still on the original firmware. We have RMA'd some and have another 2 or 3 in the office. That 5 out of maybe 20 new radios. Anyone seeing this?  




_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users 
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to