At this point I'm scared to push it out to
anymore of my 2.4 gear
Mitch Koep
218-851-8689 cell
On 01/05/2017 02:14 PM, Steve Barnes wrote:
We have now started to see M5 NanoStations having some issues as
well. We have not rolled any of them back but have a truck roll to go
fix one tomorrow. Some NanoBridges too. Funny part is our M2 tower we
did is working fine.
*Steve Barnes*
Wireless Operations Manager
*New Lisbon Broadband*
*NLBC.COM*
*PCSWIN.COM*
765-584-2288 ext:1101
*From:*[email protected]
[mailto:[email protected]] *On Behalf Of *Mitch
*Sent:* Thursday, January 05, 2017 2:13 PM
*To:* Ubiquiti Users Group <[email protected]>; James Craig
<[email protected]>
*Subject:* Re: [Ubnt_users] FW 6.0 on LocoM900
We are seeing the same thing but includes 2.4 nano and some AG2's (not
all and not xm or xw specific)
also the 2.4 clients will work for awhile then stop passing traffic
until truck roll reboot
Also RM9 upgraded to 6.0 one client works fine second client will not
pass traffic no
matter the firmware. This did NOT change when RM9 down graded back to
5.5.10 not 5.6.9
Also use care in upgrading 5Ghz and AC see strange issues as well down
grading everything
back to 5.6.9 and some to 5.5.10 to get things working again
6.0 got bloody
Wierd!!!!!
Mitch
On 01/05/2017 11:25 AM, David Kunat wrote:
Very similar issue here. Just bricked two m900's
On Jan 5, 2017, at 7:59 AM, James Craig via Ubnt_users
<[email protected] <mailto:[email protected]>> wrote:
Hey Steve,
Thanks for the report. Sending you an message offline.
On Thu, Jan 5, 2017 at 9:03 AM, Steve Barnes <[email protected]
<mailto:[email protected]>> wrote:
Yesterday we started doing more testing on 6.0. We
decided to test a Loco M900 upgrade here in the office
before rolling out to customers. Glad we did.
Upgraded first radio from 5.6.9 to 6.0. upgraded directly
plugged into radio not wirelessly. Upgrade applied and the
radio Bricked. No matter what we would do could not get
back into radio.
Tried factory reset with button on radio, No luck. Gave
up and tried 2nd radio.
Same scenario, upgrade proceeded as before. Was able to
get back into radio. Decided to factory reset from GUI to
make sure no issues. Then this device Bricked. Tried
more times to get back in and finally got a login.
Interesting thing was LAN light on radio would not show
connection. Only sporadic blinking. Flashed unit back to
5.6.9 and restarted. Same issue. No Lan light, and unit
takes minutes to be able to get a login and then is 10
Mbps on the LAN connection and is not stable. Tried other
computers and POE same issue. Have upgraded lots of M5
devices with this same system and no issues.
Ideas
Steve Barnes
Wireless Operations Manager
New Lisbon Broadband
NLBC.COM <http://NLBC.COM>
PCSWIN.COM <http://PCSWIN.COM>
765-584-2288 ext:1101 <tel:765-584-2288%20ext%3A1101>
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
