Hi There, Are you seeing low throughput on all 13 Stations?
On Mon, Jan 30, 2017 at 10:26 AM, <[email protected]> wrote: > Hello All, > > We are troubleshooting a bandwidth throughput issues for links on a few > sectors. One such link is between a Rocket 5AC PtP with AM-5G16-120 sector > antenna and a PowerBeam 5AC 500 ISO on a 10mhz channel. The sector has 13 > clients, the 500 ISO is 5.3 miles away with an CINR of 24 and received > signal fluctuating around 63. RX. AP side has a CINR of about 23 with > received signal fluctuating around 62. > > We realize a few things about this link are not ideal. We look to try an > AM-5G-Ti or AM-5G19-120 antenna on the sector, and perhaps add RF armor. > Also, PTMP and Prism radios were hard to come by when this AP was > established, so we’re looking to swap radio with a Rocket Prism. In spite > of these factors though, throughput still seems lower than it should be. > Isolated capacity shows RX 42 and TX 20-30, but we’re only able to get max > of about RX 23 and TX 5. This particular link is being used to feed a small > remote sector with only 5 clients. > > We have similar issues on other sectors, two of which have AC Prism > Rockets. Is there anything else we should be looking at besides shielding > and different antennae? Our noise levels don’t look too bad, but do others > see noise statistics from their AC equipment that don’t seem to reflect > actual noise experienced in the environment? > > Thanks for your thoughts! > > _______________________________________________ > Members mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/members > >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
