@sburei

Sending you an email.  I'd like to get the .sup file from the AP and a STA.

On Mon, Jan 30, 2017 at 11:02 AM, <[email protected]> wrote:

> Yes, particularly with TX to the AP.  Even a link with -41 signal, CINR of
> 32, and isolated capacity TX 60 and RX 65 is only getting testing at about
> 13-17 TX.
>
>
> *----- Original Message -----*
> *From:* James Craig via Members [mailto:[email protected]]
> *To:* [email protected]
> *Cc:* [email protected], [email protected]
> *Sent:* Mon, 30 Jan 2017 10:35:35 -0500
> *Subject:* Re: [WISPA Members] Rocket AC Link Throughput Issues
>
> Hi There,
>
> Are you seeing low throughput on all 13 Stations?
>
> On Mon, Jan 30, 2017 at 10:26 AM, <[email protected]> wrote:
>
>> Hello All,
>>
>> We are troubleshooting a bandwidth throughput issues for links on a few
>> sectors. One such link is between a Rocket 5AC PtP with AM-5G16-120 sector
>> antenna and a PowerBeam 5AC 500 ISO on a 10mhz channel. The sector has 13
>> clients, the 500 ISO is 5.3 miles away with an CINR of 24 and received
>> signal fluctuating around 63. RX. AP side has a CINR of about 23 with
>> received signal fluctuating around 62.
>>
>> We realize a few things about this link are not ideal. We look to try an
>> AM-5G-Ti or AM-5G19-120 antenna on the sector, and perhaps add RF armor.
>> Also, PTMP and Prism radios were hard to come by when this AP was
>> established, so we’re looking to swap radio with a Rocket Prism. In spite
>> of these factors though, throughput still seems lower than it should be.
>> Isolated capacity shows RX 42 and TX 20-30, but we’re only able to get max
>> of about RX 23 and TX 5. This particular link is being used to feed a small
>> remote sector with only 5 clients.
>>
>> We have similar issues on other sectors, two of which have AC Prism
>> Rockets. Is there anything else we should be looking at besides shielding
>> and different antennae? Our noise levels don’t look too bad, but do others
>> see noise statistics from their AC equipment that don’t seem to reflect
>> actual noise experienced in the environment?
>>
>> Thanks for your thoughts!
>>
>> _______________________________________________
>> Members mailing list
>> [email protected]
>> http://lists.wispa.org/mailman/listinfo/members
>>
>
> _______________________________________________
> Members mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/members
>
>
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to