Also, only on AirRouters with DHCP on WAN, not on static assignment. On Wed, Mar 8, 2017 at 11:12 AM, Clay Stewart <cstew...@scsbroadband.com> wrote:
> Only with AirRouter are we seeing an issue, improvements on all radios. > > On Fri, Mar 3, 2017 at 8:52 PM, Rory Conaway <r...@triadwireless.net> > wrote: > >> That’s weird guys, We’ve done hundreds of radios and haven’t seen the >> issue including 900Mhz where we believe there was an improvement. >> >> >> >> Rory >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> *On Behalf Of *RickG >> *Sent:* Friday, March 3, 2017 5:36 PM >> *To:* Ubiquiti Users Group >> *Subject:* Re: [Ubnt_users] ISSUE AirRouter >> >> >> >> Ditto but I backed down to 5.6.9. Why go all the way back to 5.5.11? >> >> >> >> On Fri, Mar 3, 2017 at 6:31 PM, Mitch <mi...@abetterwireless.com> wrote: >> >> Clay >> >> We have seen the same thing with 6.0 and also XM devices crashing >> >> So far the 6.0 has not worked well with any of our 2.4 or 900 >> >> XW we have seen power drops and crashing. >> >> We have backed all air routers down to 5.5.11 and they are working great >> now. >> >> We are working with the DEV firmwares and so far no changes >> >> Also are testing the new GEN2 AC and so far looks great!! >> >> Mitch Koep >> >> 218-851-8689 <(218)%20851-8689> cell >> >> >> >> >> >> On 03/03/2017 04:17 PM, Clay Stewart wrote: >> >> Never use AirGrids, sorry. >> >> >> >> On Fri, Mar 3, 2017 at 3:43 PM, Steve Barnes <st...@pcswin.com> wrote: >> >> We are seeing Older AirGrids lose ½ their power after going to 6.0 and >> also seeing many more Crash reports with XM radios. >> >> >> >> *Steve Barnes* >> >> Wireless Operations Manager >> >> *New Lisbon Broadband* >> >> *NLBC.COM <http://NLBC.COM>* >> >> *PCSWIN.COM <http://PCSWIN.COM>* >> >> 765-584-2288 ext:1101 <%28765%29%20584-2288> >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> *On Behalf Of *Clay Stewart >> *Sent:* Friday, March 03, 2017 3:22 PM >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> *Subject:* [Ubnt_users] ISSUE AirRouter >> >> >> >> We had a major issue today with 17 installs today where as the AirRouter >> stops working after a minute or so after (or before) upgraded 6.00 >> firmware. If we down grade, it works. If we setup below 6.00 it works, then >> upgrade it fails. We do not have this happening on hundreds of wireless >> static IP customers. This is happening on one of our fiber networks which >> is private IP DHCP. >> >> >> >> Clueless here, have any.... clues that is? >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> _______________________________________________ >> >> Ubnt_users mailing list >> >> Ubnt_users@wispa.org >> >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> -- >> >> Mitch Koep >> >> >> >> A Better Wireless >> >> 218-851-8689 <(218)%20851-8689> cell >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> -- >> >> -RickG >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users