|
Is WDS enabled on the AP, but not on the stations (or vice-a-versa)?
I'd make sure WDS is enabled on both the AP and the SMs. Jesse DuPont Network
Architect Celerity
Broadband LLC Like us! facebook.com/celeritybroadband On 3/13/17 11:26 AM, Nick Bright wrote:
Greetings, I have a BulletM2 unit in AP mode for a small number of client radios. This replaced a Mikrotik unit to allow AirMAX to be enabled. The unit is running 5.6.9.With the replacement unit, the SM units aren't ARPing; but they do appear in neighbor discovery and pass traffic normally through their PPP sessions. If I set static ARP entry, the units respond. I'm using private management IP addresses no the normal VLAN for this, so there's not a VLAN related issue. The adjacent router port is not a member of a switch group or bridge group, it's on its' own as a routed port. Any thoughts as to what might cause this? |
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
