Turn off flow control. Is it doing STP? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Jul 16, 2017 3:14 PM, "Shawn C. Peppers" <[email protected]> wrote: > How old is the AF5X? > > Shawn C. Peppers > Video Direct > 866-680-8433 <(866)%20680-8433> Toll Free > http://www.video-direct.tv > > On Jul 16, 2017, at 1:55 PM, James Wilson <[email protected]> wrote: > > I posted this issue in the airFiber and EdgeSwitch forums, I don't know if > the problem is with the AF 5X or this switch. > > > And I'm not getting any answers from the forums - maybe because it's > Sunday... > > > > We had some lightning damage at this relay site so replaced everything up > there. We have a backhaul from an airFiber 5X link. The AF 5X link is > solid and running 500 pings back to 8.8.8.8 reveals only one or two packets > lost. > > > > The attached screen shot is from the router port feeding the Master AF 5X > at the other side of the link. It's from the Mikrotik router because its > graph is easier to read than the AF. > > > Almost every minute the throughput drops. Sometimes it won't drop for a > few minutes, and sometimes it drops more often, but most of the time once a > minute. Sometimes the gaps are longer. And this isn't just a graphing > glitch, we'll drop at least three pings between the switch and the AF > during the gaps. > > > > When I run a ping test from the AF to the switch I get ping timeouts that > correspond to the drops on the graph so I'm pretty convinced that the > problem is the AF or EdgeSwitch. > > > > We put this switch in to replace a MikroTik RB-3011 just configured as a > switch. I'd gotten the EdgeSwitch several months ago to evaluate and > hadn't gotten around to it yet and we needed something fast so I just threw > it in without knowing how to configure it or updating the firmware. > > > > So it's currently using 1.2.0.4792511 firmware. I'll upgrade the firmware > tonight, but can't now because about 100 customers are running hrough it. > > > > So the only thing between this switch and the AF is about 30 feet of > ToughCable, a (new) POE injector, and a short Ethernet jumper. The AF > sees 29 dB signal to noise ratio on all four pairs and the cable test on > the switch passes. > > > > What could possibly cause this problem? Thanks for any advice! > > > <image.png> > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
