Great idea Garth! Thanks
----- Original Message -----
From: G. Nicholas
To: Ubiquiti Users Group
Sent: Thursday, July 27, 2017 5:48 PM
Subject: Re: [Ubnt_users] client isolation
Jay,
Sounds like you are running the radio in bridge mode?
If so use the firewall on the client radio LAN
block src udp port 67 0.0.0.0/32 destination 0.0.0.0/32 udp 68
Garth
----- Original Message -----
From: CBB - Jay Fuller
Sent: 7/27/2017 5:18:02 PM
To: ubnt_users@wispa.org
Subject: [Ubnt_users] client isolation
>
>
> Just found i have a business on a tower that has a tp link plugged in
backwards. The invalid DHCP ranges are getting across the interface to other
businesses on the same switch. If I enable "client isolation" on the access
point will it prevent this until we can reach the business?
> There are only two people on the access point in question.
>
> Thanks :)
>
>
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
