Jay, It sounds like you've done everything except test the cable end to end with a good tester which is the first thing I'd do. After that, I'd swap out the RM2.
On Mon, Nov 6, 2017 at 8:36 PM, Jay Weekley <[email protected]> wrote: > We lost a Ubiquiti Rocket M2 during a storm. We replaced it with a "new" > out of box M2 but it won't link with the 10/100/1000 switch. When the > techs bypass the switch they get a 10 megabit link but not 100 megabit > and can access the radio on their laptop but moving the radio back to > the switch and nothing. For trouble shooting they tried the following > but nothing gave them a link to the switch: > - swapping the switch with another 10/100/1000 unit. > - swapping patch cords > - replacing the power supply. > - forcing the radio to 10 megabit full. > - resetting and reprogramming the radio. > - re-terminating the lower end of the cable run. > Is this a cable issue? It's a 2 month old Shireen Cat 6 run so I hate to > think it's bad already. The weather isn't going to make another tower > climb likely for the next few days so we need to get it to link with the > switch for a little while. Any suggestions on how to do that? Find an > old 10/100 switch? > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > -- -RickG
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
