I usually have a "nonat" address list for any of my may rule in case the need arises, and the need often arises.
Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Christian Palecek <[email protected]> Date: 1/10/18 5:33 PM (GMT-07:00) To: Ubiquiti Users Group <[email protected]> Subject: Re: [Ubnt_users] Aircontrol pulls in public ip addresses instead of private ips. Have you tried specifying in the nat rule to never nat to the aircontrol's dst-ip? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Kevin Melson <[email protected]> Date: 1/10/18 11:25 AM (GMT-07:00) To: Ubiquiti Users Group <[email protected]> Subject: Re: [Ubnt_users] Aircontrol pulls in public ip addresses instead of private ips. yes it is nat'd on same network.....this has worked fine for last 8 years that we have used air control. its just in the last few months this started happening. Thanks, Kevin Melson Eagle One Wireless\PC Station 2007 Hwy 72 E Corinth, MS 38834 662-287-1722 [email protected] www.e1w.com ------ Original Message ------ From: "RickG" <[email protected]> To: "Ubiquiti Users Group" <[email protected]> Sent: 1/10/2018 12:20:14 PM Subject: Re: [Ubnt_users] Aircontrol pulls in public ip addresses instead of private ips. If it helps, I can tell you I have Nat'd devices on AC2 but they do not pull in the publics. Is your AC2 Nat'd on the same network? My AC2 does do a strange thing once in a while though - it pulls in the gateway address, which is my Mikrotik rather than the radio address. On Wed, Jan 10, 2018 at 11:21 AM, Kevin Melson <[email protected]> wrote: Aircontrol is pulling in our public ip addresses instead or our private addresses. These ip addresses are nat'd in the mikrotik. This only started couple beta versions back in aircontrol. We have almost 700 radios in aircontrol. 95 show up as our public ip addresses instead of our private addresses. The rest of the radios pull in just fine. And yes the 95 that come in wrong are in some of the same networks that come in just fine. Anybody got an idea I could try to make them come in correctly. I have tried deleting them and letting aircontrol discover them again but it still pulls in public ip address. No rhyme or reason on the radios. they are a mixture of powerbeam, locos, bullet m2, nanostations,nanobridges, rockets and rockets ac lite.most radios are on 6.13 or 6.14 beta. I posted on ubnt forum but haven't gotten response from anyone at ubiquitiAnyone got any ideas I could try?Server Version : v2.1-Beta10-171222-1803 Server Name : Server Uptime : 02:16:33 Database Version : PostgreSQL 9.5.9, compiled by Visual C++ build 1800, 64-bit Database Schema Version : 11.0 OS Name : Windows 10 OS Version : 10.0 JRE Version : 1.8.0_102 JRE Architecture : 64 bit Thanks, Kevin Melson Eagle One Wireless\PC Station 2007 Hwy 72 E Corinth, MS 38834 662-287-1722 [email protected] www.e1w.com _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
