After trying 6.x.x on several of my 2.4 GHz with poor performance, I gave up ans went all the way back to 5.6.2. Much better!
On Fri, Jan 26, 2018 at 8:25 AM, Steve Barnes <[email protected]> wrote: > We also found that upgrading clients to 6.14 on 2GHz band killed channel > 2464 in 10 MHz width. We have had sectors on that channel for years and the > other day we upgraded a bunch of sector clients to 6.14 and on 2 different > sectors the clients did not come back online. After messing with it. We > finally changed channel and they come back. Finally had to set those > sector to 2462 MHz since 2464 would not work. > > > > *Steve Barnes* > > Wireless Operations Manager > > *New Lisbon Broadband* > > *NLBC.COM <http://NLBC.COM>* > > *PCSWIN.COM <http://PCSWIN.COM>* > > 765-584-2288 ext:1101 > > > > *From:* [email protected] [mailto:[email protected]] > *On Behalf Of *James Craig via Ubnt_users > *Sent:* Thursday, January 25, 2018 3:11 PM > *To:* Ubiquiti Users Group <[email protected]> > *Subject:* Re: [Ubnt_users] 8.5.0 problem > > > > What freq was the AP (and channel width) set to, Forbes? > > > > Please keep in mind that the XM units operate under a different DFS grant > VS XW and AC radios. > > > > On Thu, Jan 25, 2018 at 12:50 PM, Rory Conaway <[email protected]> > wrote: > > 6.13 or 6.14. Might be a legacy upgrade thing. > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of Roy > Sent: Thursday, January 25, 2018 10:48 AM > To: Ubiquiti Users Group <[email protected]> > Subject: Re: [Ubnt_users] 8.5.0 problem > > > > Actually they can. It depends on what OS you used when you activated > DFS. I have a number of M5s running in that range > > > On 1/25/2018 8:58 AM, Rory Conaway wrote: > > The M radios don't support 5585-5655GHz. AC radios do. > > > > Rory > > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]] > On Behalf Of Forbes Mercy > > Sent: Wednesday, January 24, 2018 9:29 PM > > To: Ubiquiti Users Group > > Subject: [Ubnt_users] 8.5.0 problem > > > > Did I miss a memo, I upgraded a Prism 5AC Gen2 to firmware 8.50 and the > > 6 radios with 6.14XM Loco and Nanobridges dropped offline and no longer > worked on any UNII frequency. I had to move the radio down to a clogged > non-UNII spectrum channel? > > > > Forbes Mercy > > Washington Broadband, Inc. > > _______________________________________________ > > Ubnt_users mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > _______________________________________________ > > Ubnt_users mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- -RickG
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
