I have seen that. Usually it is at a time (inversion or ducting or whatever) when interference is a bit higher than normal. I usually change the name on the radio and apply it (quicker than a full reboot) and it will start working again. I thought that it may have been a gps synch issue. We solved it by realigning the dish. (It was on a utility pole – hence in need of alignment at least 2x a year)
From: Josh Luthman Sent: Friday, March 02, 2018 7:26 PM To: Ubiquiti Users Group Subject: [Ubnt_users] Memory leak bug AF5x Version:v3.2-debug.28630 Had a major backhaul that runs a lot of traffic start going ape shit about 10 minutes ago. Signals were just fine but the modulation would bounce. The throughput graph would drop to 0 and start climbing over and over. Same frequency for months. Looking at SNMP, it quit responding 3 days ago. A simple reboot of both sides fixed my problem. Anyone seen this before? Known issue? Any recommendations on safe firmware to use? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -------------------------------------------------------------------------------- _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
