My issue was ch0 jumper was toast. I'm guessing the management is 100% ch0 which means if it doesn't have a good signal, it'll never associate. Even of ch1 is perfectly fine.
Replaced both radios, no resolution. Replaced master jumpers, same signal. Replaced slave jumpers and we no longer have chain imbalance. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Oct 29, 2018 at 1:34 PM, RickG <rgunder...@gmail.com> wrote: > I had one do the same exact things several months ago. Replaced the radio > and all was well. Afterwards, I tried to bench test it and couldnt get > anything with other radios. > > On Sun, Oct 28, 2018 at 8:40 PM Josh Luthman <j...@imaginenetworksllc.com> > wrote: > >> I have an AF5x link that just went down seemingly out of the blue earlier >> this afternoon. It's been running for months at 63/75 (maybe even 12-18 >> months?) and chugging along doing it's job. Now we can't get any >> association. >> >> Both sides see an AP we have at 5190 (the BH runs at 5215). This tells me >> that the dishes/jumpers are unlikely the issue. >> >> We replaced the far radio. Got too dark/windy/rainy so we haven't >> replaced the master side. I swapped master/slave roles. I changed >> frequencies and channel sizes all over the place, I'm not seeing any >> association what so ever. I was running 4.0.3 release and finally tried >> v4.1.0-beta5.32792 - no change. >> >> Any ideas short of replacing the master radio? Any other possibilities or >> thoughts? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > > -- > -RickG > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users