Ok, thanks for the feedback. So it may be device- or model-specific. I have gone back and tested on more devices. My two original devices that kickedthis off, are both Rocket Prism 5AC Gen2 | XC.v8.6.2, and are not responding properly.
I have found several Rocket 5AC Prism running 8.5.x that are. Also I have found one Rocket Prism 5AC Gen2 | XC.v8.5.12 that responds correctly. Either I'm unlucky or there's an issue with Rocket Prism 5AC Gen2 | XC.v8.6.2. Thanks again! --dan From: ubnt_users-boun...@wispa.org <ubnt_users-boun...@wispa.org> On Behalf Of Sam Tetherow Sent: Tuesday, December 03, 2019 10:37 AM To: ubnt_users@wispa.org Subject: Re: [Ubnt_users] Ubiquiti SNMP for AirOS8? Yes it is supported along with later releases of V6 http://www.oid-info.com/cgi-bin/display?nb=41112&f=1.3.6.1.4.1.41112.1&a=display<http://www.oid-info.com/cgi-bin/display?nb=41112&f=1.3.6.1.4.1&a=display> Not all OIDs are available on all devices. It depends on the hardware, and settings for the radio. For instance you will not have 1.3.6.1.4.1.41112.1.3 on anything other than airFiber. 1.3.6.1.4.1.41112.4 is ubntAirMax so it won't show up on radios that are not running airMax. Since I don't know what type of radio you are querying I can't tell you why you are not getting the channelwidth with the last query you listed but my guess would be the radio is has airMax turned off, is an airFiber, or LTU. Depending on what you are wanting the data in I have found parsing the status.cgi page to be a lot easier (and faster depending on what you are looking for) than pulling the SNMP data. For instance hitting the status page is faster than pulling the full walk and parsing it. Plus it is easier to parse since you are getting it back in a json format so tying data together for interfaces or stations is a lot less work. Sam Tetherow Sandhills Wireless On 12/3/19 9:46 AM, Dan - LTI Support via Ubnt_users wrote: Ok, so /CLEARLY/ Ubiquiti doesn't want us using their 'community' website since it's absolutely useless, so I'll pose my question here. Is SNMP even remotely supported at this point in airos8? I have downloaded the MIB bundle for 8.6.2 and loaded UBNT-AirMAX-MIB with this metadata: REVISION "201710030000Z" DESCRIPTION "ubntAirMAX revision" ::= { ubntMIB 4 } This MIB imports from bundled UBNT-MIB with this metadata: REVISION "201402270000Z" DESCRIPTION "Split revision" ::= { ubnt 1 } -- -------------------------------------------------------------------------------- -- Ubiquiti Networks Root -- -------------------------------------------------------------------------------- ubnt OBJECT IDENTIFIER ::= { enterprises 41112 } ...and tried to get/walk but cannot get any vendor-specific information. $ snmpwalk -v 1 -c public 10.195.5.10 1.3.6.1.2.1.1.3.0 iso.3.6.1.2.1.1.3.0 = Timeticks: (24323800) 2 days, 19:33:58.00 $ snmpwalk -v 1 -c public 10.195.5.1 0 1.3.6.1.4.1.41112 End of MIB $ Even querying known-good OIDs from previous versions returns nothing: $ snmpget -v 1 -c public 10.195.5.10 1.3.6.1.4.1.41112.1.4.5.1.14.1 Error in packet Reason: (noSuchName) There is no such variable name in this MIB. Failed object: iso.3.6.1.4.1.41112.1.4.5.1.14.1 $ Does anyone have any SNMP working on current AirOS8? --dan _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users