Agradeço muito a todos, mas o prob ja foi resolvido
ei avia digitato uma lina de comando no xorg.conf
fazendo ele apontar pra um arquivi inexistente a linha foi:
Section "InputDevice"
      Identifier      "Configured Mouse"
      Driver          "mouse"
      Option          "CorePointer"
      Option          "Device"                *"/dev/input/psaux"*
      Option          "Protocol"              "ImPS/2"
      Option          "ZAxisMapping"          "4 5"
EndSection

e deveria ser  *"/dev/psaux"*
não soube como etitar-lo no modo texto, então reintaleu o SO e digitei a
alteração sem prob...

Obrigado mais uma ves e desculpem-me por ñ postar o erro corretamente


2006/4/29, José Geraldo Gouvêa <[EMAIL PROTECTED]>:

Em Sábado 29 Abril 2006 19:55, Kleber Martins escreveu:
> Configurei o /etc/X11/xorg.conf tentado ativar meu mouse.
> mas ao reiniciar SO,  o Ubunto só abre no modo texto
> deu um erro no modo grafico
> tem como recuberar/
> oq aconteceu?
> o q devo fazer?

Minha "bola de cristal" também tá com defeito, mas aconselho a fazer o
seguinte (em um terminal)

$ cd /etc/X11
$ cp xorg.conf xorg.conf.old
$ sudo dpkg-reconfigure -phigh xserver-xorg

Responda com carinho todas as perguntas. De preferência tente confiar nas
adivinhações do Ubuntu. SÓ ENTRE COM DADOS MANUALMENTE SE TIVER CERTEZA DO
QUE ESTÁ FAZENDO.

Ao terminar, reinicie o X

$ sudo killall gdm kdm
$ sudo gdm

Se ainda não conseguir entrar, "mate o x":

$ sudo killall gdm kdm

e edite manualmente o xorg.conf:

$ sudo vi /etc/X11/xorg.conf

Em um terminal separado, abra a página de manual do xorg.conf e leia para
tirar dúvidas:

$ man /etc/X11/xorg.conf

Só a título de comparação aqui vai o meu xorg.conf, comentado
----------------------COMEÇANDO----------------------------
# ANTES DESTE COMEÇO HÁ UMA SÉRIE DE COMENTÁRIOS QUE EU APAGUEI

Section "Files"
       # NÃO MEXA NESTA SEÇÃO
   FontPath    "/usr/share/X11/fonts/misc"
   FontPath    "/usr/share/X11/fonts/100dpi:unscaled"
   FontPath    "/usr/share/X11/fonts/75dpi:unscaled"
   FontPath    "/usr/share/X11/fonts/Type1"
   FontPath    "/usr/local/share/fonts/sun"
   FontPath    "/usr/local/share/fonts/MS"
   FontPath    "/usr/local/share/fonts/adobe"
   FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
   FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
   FontPath    "/usr/share/fonts/truetype/ttf-f500"
EndSection

Section "Module"
       # NÃO MEXA AQUI, A MENOS QUE REALMENTE NÃO PRECISE DE ALGUM DESTES
       # MÓDULOS OU PRECISE DE OUTROS
       Load    "bitmap"
       Load    "dbe"
       Load    "ddc"
       Load    "dri"
       Load    "extmod"
       Load    "freetype"
       Load    "glx"
       Load    "int10"
       Load    "record"
       Load    "type1"
       Load    "vbe"
EndSection

Section "InputDevice"
       # CONFIGURAÇÃO DE UM TECLADO BRASILEIRO ABNT2 PADRÃO
       Identifier      "Generic Keyboard"
       Driver          "kbd"
       Option          "CoreKeyboard"
       Option          "XkbRules"      "xorg"
       Option          "XkbModel"      "abnt2"
       Option          "XkbLayout"     "br"
       Option          "XkbVariant"    "abnt2"
EndSection

Section "InputDevice"
       # CONFIGURAÇÃO DE UM MOUSE ÓTICO PS/2 COM BOTÃO DE ROLAGEM
       Identifier      "Configured Mouse"
       Driver          "mouse"
       Option          "CorePointer"
       Option          "Device"                "/dev/input/mice"
       Option          "Protocol"              "ImPS/2"
       Option          "ZAxisMapping"          "4 5"
EndSection

Section "Device"
       # SE SUA PLACA DE VÍDEO NÃO FOR SUPORTADA, OU SE VOCÊ NÃO SOUBER
       # O NOME DELA, USE ESTE SETUP PROVISORIAMENTE
       Identifier      "Generic Video Card"
       Driver          "vesa"
       BusID           "PCI:1:0:0"
EndSection

Section "Monitor"
       # VERIFIQUE NO MANUAL DO SEU MONITOR QUAIS SÃO AS TAXAS DE
HORIZSYNC E
       # VERTREFRESH MÁXIMAS QUE ELE SUPORTA E ALTERE AQUI PARA PODER
OBTER
       # RESOLUÇÃO MÁXIMA
       Identifier      "T730SH"
       Option          "DPMS"
       HorizSync       30-71
       VertRefresh     50-160
EndSection

Section "Screen"
       Identifier      "Default Screen"        # NÃO MEXA
       Device          "Generic Video Card"    # MODIFIQUE DE ACORDO COM A
PLACA DE VÍDEO
       Monitor         "T730SH"                # MODIFIQUE DE ACORDO COM O
MONITOR
       DefaultDepth    16                      # USE COR DE 16 BITS PARA
ECONOMIZAR MEMÓRIA
       SubSection "Display"
               Depth           8
               Modes           "1280x1024" "1024x768" "800x600" "640x480"
       EndSubSection
       # ESTA SEÇÃO COSTUMA TER VÁRIAS OUTRAS SUB-SEÇÕES, QUE EU APAGUEI
       SubSection "Display"
               Depth           16
               Modes           "1280x1024" "1024x768" "800x600" "640x480"
       EndSubSection
       SubSection "Display"
               Depth           24
               Modes           "1280x1024" "1024x768" "800x600" "640x480"
       EndSubSection
EndSection

Section "ServerLayout"
       # NÃO MEXA AQUI
       Identifier      "Default Layout"
       Screen          "Default Screen"
       InputDevice     "Generic Keyboard"
       InputDevice     "Configured Mouse"
EndSection

Section "DRI"
       # NÃO MEXA AQUI
       Mode    0666
EndSection

--------------------------TÉRMINO-----------------------------------

Você vai fazer o seguinte:

Reconfigure seu X. Se ele não funcionar, então você por favor
anote para a lista a mensagem de erro e diga-nos onde seu Xorg.conf é
diferente deste acima.

Só assim poderemos te ajudar.

--
José Geraldo Gouvêa

--
ubuntu-br mailing list
[email protected]
www.ubuntu-br.org
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

--
ubuntu-br mailing list
[email protected]
www.ubuntu-br.org
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

Responder a