Boa tarde, estou a uns 3 dias tentando fazer uma webcam USB creative, modelo PD0040, mais não consigo de jeito nenhum..
seguem meus logs.. [EMAIL PROTECTED]:~/downloads/spca5xx-20060501$ lsmod | grep spca spca5xx 678608 0 videodev 9728 2 spca5xx,ov51x usbcore 130304 5 spca5xx,ov51x,ehci_hcd,ohci_hcd [EMAIL PROTECTED]:/proc/bus/usb/002$ cat /proc/bus/usb/devices T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.17-10-386 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:03.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=05a9 ProdID=0518 Rev= 1.09 S: Manufacturer=OmniVision Technologies, Inc. S: Product=USB Camera C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x E: Ad=81(I) Atr=01(Isoc) MxPS= 129 Ivl=1ms I: If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x E: Ad=81(I) Atr=01(Isoc) MxPS= 257 Ivl=1ms I: If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x E: Ad=81(I) Atr=01(Isoc) MxPS= 385 Ivl=1ms I: If#= 0 Alt= 4 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x E: Ad=81(I) Atr=01(Isoc) MxPS= 513 Ivl=1ms I: If#= 0 Alt= 5 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x E: Ad=81(I) Atr=01(Isoc) MxPS= 641 Ivl=1ms I: If#= 0 Alt= 6 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x E: Ad=81(I) Atr=01(Isoc) MxPS= 769 Ivl=1ms I: If#= 0 Alt= 7 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x E: Ad=81(I) Atr=01(Isoc) MxPS= 897 Ivl=1ms [EMAIL PROTECTED]:/proc/bus/usb/002$ lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 003: ID 05a9:0518 OmniVision Technologies, Inc. OV518 WebCam Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Até ai parece que esta tudo OK de drivers, mais quando vou iniciar algum programa de cam recebo mensagens que não consegue achar o /dev/video0 [EMAIL PROTECTED]:/proc/bus/usb/002$ webcam reading config file: /home/jpbotelho/.webcamrc v4l2: open /dev/video0: Function not implemented v4l2: open /dev/video0: Function not implemented v4l: open /dev/video0: Function not implemented no grabber device available [EMAIL PROTECTED]:/proc/bus/usb/002$ [EMAIL PROTECTED]:/proc/bus/usb/002$ gqcam /dev/video: Function not implemented e ja testei o camorama tmb e nada.. alguem me da um help.. juro que não foi falta de pesquisa antes de mandar o email pra lista.. valeu -- ubuntu-br mailing list [email protected] www.ubuntubrasil.org https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
