Arlei Obrigado pelo material,
PAssei hoje a manha inteira segui todos os itens no manual mas não consigo criar a ra0 de jeito nenhum. Consigo fazer o make, criei arquivos de configuração, mas quando tento levantar a ra0 ela nao existe (só aparecem as eth0, wlan0, wmaster0 e l0). Se alguem ja teve esse problema por favor me ajude estou quase caindo no Win2003Server. Pois esta máquina é a qual utilizarei o VMWare. Grande abraço a todos e valeu mais uma vez a dica do Arlei, já melhorou bastante do que estava antes. Guilherme >From: Arlei Silveira Silva <[EMAIL PROTECTED]> >Reply-To: Lista de discussão do LoCoTeam >Brasileiro<[email protected]> >To: Lista de discussão do LoCoTeam Brasileiro<[email protected]> >Subject: Re: [Ubuntu-BR] Wireless Edimax/Ralink >Date: Sat, 16 Dec 2006 18:30:31 -0200 > >Guilherme, > >a algum tempo li um post no Planeta sobre como configurar uma rede >wireless de placas com esse chipset Ralink. >Segue abaixo o link do post que espero lhe ser util. >http://planeta.ubuntubrasil.org/post/1243 > >Tem tbem um tuto muito bom do Morimoto no site dele sobre configuração >de dispositivos wireless que tbem vale a consulta. >http://www.guiadohardware.net/guias/05/index4.php > >T+ >Arlei > >Guilherme Wanderley André escreveu: > > Pessoal, > > > > Desculpe-me, ainda sou leigo pois usei linux a muito tempo atras e > > estou tentando me atualizar novamente agora. > > > > Tenho uma placa de WiFi Edimax (chipset Ralink) instalada no micro o > > qual instalei o Ubuntu 6.0 porém não estou conseguindo me comunicar > > com a rede, aparentemente não está reconhecendo a placa. > > > > Simplesmente na configuração de Wireless não mostra nenhuma rede WiFi > > proxima e mesmo configurando manualmente não consigo "pingar" nenhum > > ip da rede. > > > > Anexei o arquivo README ao e-mail para que possam me auxiliar. > > > > O CD-ROM da placa possui arquivos .c e .h para configurar no linux e > > justamente a parte que não estou conseguindo seguir é: > > > > > > For 2.6 series kernel: > > a. run 'cd STA/Module' > > 'cp ../2.6.x/Makefile .' > > > > b. $make -C /path/to/source SUBDIRS=$PWD modules > > Where /path/to/source is the path to the source directory for the > > (configured and built) target kernel. > > > > c. run '/sbin/insmod rt2500.ko' (as root) > > '/sbin/ifconfig ra0 inet YOUR_IP up' > > > > > > For big endian platform: > > a. replace Makefile with Makefile.BigEndian > > > > > > Obrigado antecipadamente pela ajuda. > > > > Grande abraço, > > > > Guilherme > > > > _________________________________________________________________ > > MSN Hotmail, o maior webmail do Brasil. http://www.hotmail.com > > > > E-mail classificado pelo Identificador de Spam Inteligente Terra. > > Para alterar a categoria classificada, visite > > >http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=arlei&_l=1,1166289497.18638.31021.ambrose.hst.terra.com.br,14324,Des15,Des15 > > > > > > Esta mensagem foi verificada pelo E-mail Protegido Terra. > > Scan engine: McAfee VirusScan / Atualizado em 15/12/2006 / Versão: > > 4.4.00/4920 > > Proteja o seu e-mail Terra: http://mail.terra.com.br/ > > * README > > * > > * Ralink Tech Inc. > > * > > * http://www.ralinktech.com > > * > > > > ======================================================================= > > ModelName: > > =========== > > RT2500 > > > > > > ======================================================================= > > Supporting Kernel: > > =================== > > linux kernel 2.4 and 2.6 series. > > Tested in Redhat 7.3 or later, Fedora Core 1, Suse 8.0,8.1,9.0, > > Mandrake 9.0->10.0, Slackware 9.0,9.1 > > > > > > > > ======================================================================= > > Description: > > ============= > > This is a linux device driver for Ralink RT2500 b/g WLAN Card. > > > > > > > > ======================================================================= > > Contents: > > ============= > > ./2.4.x : Makefile for kernel 2.4 series > > ./2.6.x : Makefile for kernel 2.6 series > > *.c : c files > > *.h : header files > > Makefile.BigEndian : Makefile for big endian platform > > > > > > > > ======================================================================= > > Features: > > ========== > > This driver implements basic IEEE802.11. Infrastructure and adhoc > > mode with open or shared or WPA > > authentication method. WEP-40 and WEP-104 TKIP and AES encryption, > > > > > > > > ======================================================================= > > Build Instructions: > > ==================== > > For 2.4 series kernel: > > a. $tar -xvzf RT2500-Linux-STA-x.x.x.x.tar.gz > > go to "./RT2500-Linux-STA-x.x.x.x/Module" directory. > > > > b. Use 'chmod' command to change access right of following script files >: > > 'load', 'unload', 'Configure' > > > > c. run 'cp ../2.6.x/Makefile .' > > d. $make config # config build linux os version > > > > e. $make all # compile driver source code > > > > f. $load # load/insmod module(rt2500.o) > > > > Note: Script functionality: > > load load module to kernel > > unload unload module from kernel > > Configure retrieve linux version > > > > > > For 2.6 series kernel: > > a. run 'cd STA/Module' > > 'cp ../2.6.x/Makefile .' > > > > b. $make -C /path/to/source SUBDIRS=$PWD modules > > Where /path/to/source is the path to the source directory for the > > (configured and built) target kernel. > > > > c. run '/sbin/insmod rt2500.ko' (as root) > > '/sbin/ifconfig ra0 inet YOUR_IP up' > > > > > > For big endian platform: > > a. replace Makefile with Makefile.BigEndian > > > > > > > > ======================================================================= > > To BUILD UTILITY > > ==================== > > > > a. go to the "./Utility" directory > > > > b. run 'qmake -o Makefile raconfig2500.pro' > > If qmake command is not found in your system, you can download the > > QT tool > > 'qt-x11-free-3.2.1' or later at > > http://www.trolltech.com/ > > > > (qmake comes with RedHat 7.3 or later QT Package) > > > > c. run 'make" to compile the utility source code. > > > > d. After all, an execution file would be generated "RaConfig2500" > > run "RaConfig2500" to config the driver as you want > > > > > > > > ======================================================================= > > CONFIGURATION: > > ==================== > > RT2500 driver can be configured via following interfaces, > > i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration > > file, (iv) RaConfig2500 > > > > i) iwconfig comes with kernel. > > ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details. > > iii)copy configuration file "RT2500STA.dat" to > > /etc/Wireless/RT2500STA/RT2500STA.dat. > > Please refer to 3.1) for details. > > iv) RT2500 provides API : RaConfig2500, please go to directory > > ./Utility and refer to how-to-compile.txt > > > > > > Configuration File : RT2500STA.dat > > > > # Copy this file to /etc/Wireless/RT2500STA/RT2500STA.dat > > # This file is a binary file and will be read on loading rt2500.o >module. > > # > > # Use "vi -b RT2500STA.dat" to modify settings according to your need. > > # > > # 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using > > as Infrastructure-mode > > # 2.) set Channel to "0" for auto-select on Infrastructure mode > > # 3.) set SSID for connecting to your Accss-point. > > # 4.) AuthMode can be "OPEN", "SHARED", "WPAPSK", "WPANONE" > > # 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES" > > # for more information refer to the Readme file. > > # > > [Default] > > CountryRegion=0 > > WirelessMode=0 > > SSID=AP350 > > NetworkType=Infra > > Channel=0 > > AuthMode=OPEN > > EncrypType=NONE > > DefaultKeyID=1 > > Key1Type=0 > > Key1Str=0123456789 > > Key2Type=0 > > Key2Str= > > Key3Type=0 > > Key3Str= > > Key4Type=0 > > Key4Str= > > WPAPSK=abcdefghijklmnopqrstuvwxyz > > TXBurst=0 > > TurboRate=0 > > BGProtection=0 > > ShortSlot=0 > > TxRate=0 > > RTSThreshold=2312 > > FragThreshold=2312 > > PSMode=CAM > > ----------------------------------------------- > > syntax is 'Param'='Value' and describes below. > > > > 1. CountryRegion=value > > value > > 0: for use channel 1-11 > > 1: for use channel 1-11 > > 2: for use channel 1-13 > > 3: for use channel 10-11 > > 4: for use channel 10-13 > > 5: for use channel 14 > > 6: for use channel 1-14 > > 7: for use channel 3-9 > > 2. WirelessMode=value > > value > > 0: 802.11 B/G mixed > > 1: 802.11 B only > > 3. SSID=value > > value > > 1~32 ascii characters. > > 4. NetworkType=Infra > > value > > Infra : infrastructure mode > > Adhoc : adhoc mode > > 5. Channel=value > > value > > 1~14 depends on CountryRegion > > 6. AuthMode=value > > value > > OPEN For Open System > > SHARED For Shared key system > > WPAPSK > > 7. EncrypType=value > > value > > NONE :For AuthMode=OPEN > > WEP :For AuthMode=OPEN or AuthMode=SHARED > > TKIP :For AuthMode=WPAPSK > > AES :For AuthMode=WPAPSK > > 8. DefaultKeyID=value > > value > > 1 ~ 4 > > 9. Key1Type=value > > value > > 0: Hexadecimal > > 1: Ascii > > 10. Key1Str=value > > value > > 10 or 26 hexadecimal characters eg: 012345678 > > 5 or 13 ascii characters eg: passd > > 11. Key2Type=value > > value > > 0: Hexadecimal > > 1: Ascii > > 12. Key2Str=value > > value > > 10 or 26 hexadecimal characters eg: 012345678 > > 5 or 13 ascii characters eg: passd > > 13. Key3Type=value > > value > > 0: Hexadecimal > > 1: Ascii > > 14. Key3Str=value > > value > > 10 or 26 hexadecimal characters eg: 012345678 > > 5 or 13 ascii characters eg: passd > > 15. Key4Type=value > > value > > 0: Hexadecimal > > 1: Ascii > > 16. Key4Str=value > > value > > 10 or 26 hexadecimal characters eg: 012345678 > > 5 or 13 ascii characters eg: passd > > 17. WPAPSK=value > > value > > 8 ~ 63 characters > > or > > 64 hexadecimal characters > > 18. TxBurst=value > > value > > 0: Disable > > 1: Enable > > 19. TurboRate=value > > value > > 0: Disable > > 1: Enable > > 20. BGProtection=value > > value > > 0: Auto > > 1: Always On > > 2: Always Off > > 21. ShortSlot=value > > value > > 0: Disable > > 1: Enable > > 22. TxRate=value > > value > > 0: Auto > > 1: 1 Mbps > > 2: 2 Mbps > > 3: 5.5 Mbps > > 4: 11 Mbps > > 5: 6 Mbps //WirelessMode must be 0 > > 6: 9 Mbps //WirelessMode must be 0 > > 7: 12 Mbps //WirelessMode must be 0 > > 8: 18 Mbps //WirelessMode must be 0 > > 9: 24 Mbps //WirelessMode must be 0 > > 10: 36 Mbps //WirelessMode must be 0 > > 11: 48 Mbps //WirelessMode must be 0 > > 12: 54 Mbps //WirelessMode must be 0 > > 23. RTSThreshold=value > > value > > 1 ~ 2312 > > 24. FragThreshold=value > > value > > 256 ~ 2312 > > 25. PSMode=value > > value > > MAX_PSP Power Saving Mode > > CAM CAM (Constantly Awake Mode) > > > > 26. AdhocOfdm=value > > value > > 0: Adhere WIFI spec, the Tx MAX rate will be 11Mbps in Adhoc > > mode > > 1: Violate WIFI spec, the Tx MAX rate will be 54Mbps in > > Adhoc mode > > > > 27. StaWithEtherBridge=value > > value > > 0: Disable sta with ethernet to wireless bridge > > 1: Enable sta with ethernet to wireless bridge > > > > > > MORE INFORMATION > > >================================================================================= > > > > If you want for rt2500 driver to auto-load at boot time: > > A) choose ra0 for first RT2500 WLAN card, ra1 for second RT2500 WLAN > > card, etc. > > > > B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/, > > edit( or add the line) in /etc/modules.conf: > > alias ra0 rt2500 > > > > C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0 > > DEVICE='ra0' > > ONBOOT='yes' > > > > > > NOTE: > > if you use dhcp, add this line too . > > BOOTPROTO='dhcp' > > > > *D) To ease the Default Gateway setting, > > add the line > > GATEWAY=x.x.x.x > > in /etc/sysconfig/network > > > > > > >================================================================================== > > > > = To install a device driver for Ralink RT2500 b/g WLAN card in AMD64 > > SUSE Linux = > > >================================================================================== > > > > A. > > 1.Edit(or add the line) in /etc/modules.conf > > alias ra0 rt2500 > > 2.Create and edit 'ifcfg-ra0' file in /etc/sysconfig/network/ > > DEVICE='ra0' > > ONBOOT='yes' > > BOOTPROTO='dhcp' > > > > B. $tar -xvzf RT2500--Linux-STA-x.x.x.x.tar.gz > > Go to "./RT2500-Linux-STA-x.x.x.x/Module" directory > > > > 1.Copy ./Module/2.6.x/Makefile to "./Module" directory > > 2.$make -C /usr/src/linux-2.6.8-gentoo-r3 SUBDIRS=$PWD modules > > where linux-2.6.8-gentoo-r3 is your 2.6 kernel name > > 3.$insmod rt2500.ko > > 4.$ifconfig ra0 up > > 5.$iwconfig ra0 essid any > > 6.$dhcpcd ra0& > > 7.$dhcpcd ra0 > > > > Now it should be functional - type > > $iwconfig > > to confirm setting > > > > C.Activate it on startup with a script. > > 1.Input your script file 'wlancfg' in /etc/init.d/ > > 2.Start applicaiton YaST in System, choose system -> runlevel editor > > 3.In expert mode, enable 'wlancfg' in runlevel 5. > > > > > >-- >ubuntu-br mailing list >[email protected] >www.ubuntubrasil.org >https://lists.ubuntu.com/mailman/listinfo/ubuntu-br _________________________________________________________________ MSN Busca: fácil, rápido, direto ao ponto. http://search.msn.com.br -- ubuntu-br mailing list [email protected] www.ubuntubrasil.org https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
