Recentemente adquiri uma gaveta externa IDE/USB e coloquei um CDRW
nela... pois bem... pra minha grata surpresa, não foi preciso de nada
além do programa de gravação (K3B) para que o EDGY reconheça essa
gaveta... meu problema é que eu consigo ler e até apagar o conteudo de
um cdrw (claro que for só cdr, não vou conseguir apagar), mas o problema
é que naum consigo é gravar cd nenhum... e o pior, não consegui nem
identificar o erro... segue abaixo a depuração do k3b:
System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.5
QT Version: 3.3.6
Kernel: 2.6.17-10-server
Devices
-----------------------
TSSTcorp CD-R/RW SH-R522C TS05 (/dev/scd0, /dev/sg0) at /mnt/usb [CD-R;
CD-RW; CD-ROM] [CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96R; RAW/R16;
RAW/R96R]
TOSHIBA DVD-ROM SD-C2502 1011 (/dev/hdc, ) at /media/cdrom0 [CD-ROM;
DVD-ROM] [DVD-ROM; CD-ROM] [Nenhum]
K3b
-----------------------
Size of filesystem calculated: 327068
Used versions
-----------------------
cdrecord: 2.1.1a03
cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.17-10-server
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try
Linux-2.4 or Solaris.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.33
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg
(debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright
1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005
Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to
<[EMAIL PROTECTED]>.
The original author should not be bothered with problems of this
version.
TOC Type: 1 = CD-ROM
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identifikation : 'CD-R/RW SH-R522C'
Revision : 'TS05'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1016064 = 992 KB
FIFO size : 4194304 = 4096 KB
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Track 01: data 638 MB
Total size: 733 MB (72:40.90) = 327068 sectors
Lout start: 733 MB (72:42/68) = 327068 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11940 (97:22/60)
ATIP start of lead out: 335975 (74:41/50)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 10)
power mult factor: 3 5
recommended erase/write power: 2
A1 values: 02 3A A0
A2 values: 5A A6 14
Disk type: Phase change
Manuf. index: 43
Manufacturer: Acer Media Technology, Inc.
Blocks total: 335975 Blocks current: 335975 Blocks remaining: 8907
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write in 3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
/usr/bin/X11/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/bin/X11/cdrecord: Cannot allocate memory. write_g1: scsi sendcmd:
no error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
/usr/bin/X11/cdrecord: Cannot allocate memory. write_g1: scsi sendcmd:
no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
/usr/bin/X11/cdrecord: A write error occured.
/usr/bin/X11/cdrecord: Please properly read the error message above.
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 992 K BSize: 992 K
Starting new track at sector: 0
Track 01: 0 of 638 MB written.
write track data: error after 0 bytes
Writing time: 10.219s
Average write speed 868.4x.
Fixating...
Fixating time: 0.011s
BURN-Free was never needed.
/usr/bin/X11/cdrecord: fifo had 64 puts and 1 gets.
/usr/bin/X11/cdrecord: fifo was 0 times empty and 0 times full, min fill
was 100%.
cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=0,0,0 speed=4 -dao
driveropts=burnfree -eject -data -tsize=327068s -
mkisofs
-----------------------
327068
0.16% done, estimate finish Fri Dec 29 16:06:43 2006
0.31% done, estimate finish Fri Dec 29 16:01:29 2006
0.46% done, estimate finish Fri Dec 29 15:59:42 2006
0.61% done, estimate finish Fri Dec 29 15:58:48 2006
mkisofs command:
-----------------------
/usr/bin/X11/mkisofs -gui -graft-points -volid inter backup -volset
-appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM
-publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-edisonjr/k3bs5DYJa.tmp -rational-rock -hide-list
/tmp/kde-edisonjr/k3by3saYb.tmp -joliet -hide-joliet-list
/tmp/kde-edisonjr/k3bWbEhpb.tmp -full-iso9660-filenames -iso-level 2
-path-list /tmp/kde-edisonjr/k3bB30S6a.tmp
--
ubuntu-br mailing list
[email protected]
www.ubuntubrasil.org
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
