Estou com o Feisty beta instalado e estou com um problema que desconfio que esteja relacionado com o SATA. Ao inciar, depois do grub, o sistema demora dois minutos para chagar ao login aí o gnome é carregado normalmente e seu comportamento é normal, com todos os dispositivos funcionando. Já reistalei com o cd desktop e com o alternate e o problema continua.
O dmesg apresenta linhas de anormalidade como seguem: ...omitido... [ 24.340999] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000120b0 irq 14 [ 24.341031] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000120b8 irq 15 [ 24.341054] scsi0 : ata_piix [ 24.440811] usb 1-2: configuration #1 chosen from 1 choice [ 24.443770] hub 1-2:1.0: USB hub found [ 24.446727] hub 1-2:1.0: 4 ports detected [ 24.676715] ATA: abnormal status 0x7F on port 0x000101f7 <======================== [ 24.686861] ATA: abnormal status 0x7F on port 0x000101f7 <======================== [ 24.798445] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 24.850659] ata1.01: ATAPI, max UDMA/33 [ 24.983679] usb 2-1: configuration #1 chosen from 1 choice [ 25.191170] usb 1-2.3: new full speed USB device using uhci_hcd and address 3 [ 25.352136] usb 1-2.3: configuration #1 chosen from 1 choice [ 54.828227] ata1.01: qc timeout (cmd 0xef) [ 54.828239] ata1.01: failed to set xfermode (err_mask=0x4) <======================== [ 54.828243] ata1: failed to recover some devices, retrying in 5 secs <======================== [ 60.166438] ATA: abnormal status 0x7F on port 0x000101f7 <======================== [ 60.176579] ATA: abnormal status 0x7F on port 0x000101f7 <======================== [ 90.317947] ata1.01: qc timeout (cmd 0xef) [ 90.317958] ata1.01: failed to set xfermode (err_mask=0x4) <======================== [ 90.317964] ata1.01: limiting speed to UDMA/33:PIO3 [ 90.317966] ata1: failed to recover some devices, retrying in 5 secs <======================== [ 95.656160] ATA: abnormal status 0x7F on port 0x000101f7 <======================== [ 95.666303] ATA: abnormal status 0x7F on port 0x000101f7 <======================== [ 125.807673] ata1.01: qc timeout (cmd 0xef) [ 125.807684] ata1.01: failed to set xfermode (err_mask=0x4) <======================== [ 125.807688] ata1.01: disabled [ 126.311289] scsi1 : ata_piix [ 126.311564] ata2: port disabled. ignoring. [ 126.311609] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 126.311638] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 126.311660] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 126.311710] ata3: SATA max UDMA/133 cmd 0x000120c8 ctl 0x000120ee bmdma 0x000120a0 irq 18 [ 126.311738] ata4: SATA max UDMA/133 cmd 0x000120c0 ctl 0x000120ea bmdma 0x000120a8 irq 18 [ 126.311748] scsi2 : ata_piix [ 126.479257] ata3.00: ATA-7: SAMSUNG HD080HJ, ZH100-41, max UDMA7 [ 126.479262] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 126.503164] ata3.00: configured for UDMA/133 [ 126.503178] scsi3 : ata_piix [ 126.669167] ATA: abnormal status 0x7F on port 0x000120c7 <======================== [ 126.670472] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD080HJ ZH10 PQ: 0 ANSI: 5 [ 126.677174] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 126.677195] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 126.677200] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 126.677446] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 126.677486] ehci_hcd 0000:00:1d.7: debug port 1 [ 126.677493] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 126.677501] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x50204400 [ 126.681396] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 126.682075] usb usb5: configuration #1 chosen from 1 choice [ 126.682335] hub 5-0:1.0: USB hub found [ 126.682350] hub 5-0:1.0: 8 ports detected ...omitido... e mais adiante... [ 135.143316] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 135.143366] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 135.271216] intel_rng: Firmware space is locked read-only. If you can't or <======================== [ 135.271219] intel_rng: don't want to disable this in firmware setup, and if <======================== [ 135.271221] intel_rng: you are certain that your system has a functional <======================== [ 135.271222] intel_rng: RNG, try using the 'no_fwh_detect' option. <======================== [ 135.281256] Linux agpgart interface v0.102 (c) Dave Jones [ 135.283028] agpgart: Detected an Intel 946GZ Chipset. Instalei outras distros para checar se o problema não seria do hardware mas elas carregavam o sistema normalmente, bem rápido mesmo. No lauchpad há uma referência sobre ATA abnormal.... mas refere-se a um macbook e já foi solucionado com a atualização do kernel que não aconteceu aqui. Alguém poderia me dar uma orientação de como solucionar esse problema? [ ] Antonio Martins -- Interessado em aprender mais sobre o Ubuntu em português? http://wiki.ubuntu-br.org/ComeceAqui - ubuntu-br mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-br -- Interessado em aprender mais sobre o Ubuntu em português? http://wiki.ubuntu-br.org/ComeceAqui - ubuntu-br mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
