Virge... aí a coisa ficou do mal... Tb não estou vendo nada pelo Nautilus...
Se vc consegue verificar, serviço ativo, smbtree funfando... Provavelmente o Nautilus tá dando algum BO... Perguntei sobre ele, pq quando testei aki na minha empresa, o Konqueror rolou belezinha: era só digitar smb:/ que todo mundo se via, tanto win* quanto lin*, no PDC ou como grupo de trabalho (minha rede, graças a algumas máquinas, é mista. Quando instalei o Nautilus, só consigo ver os micros do grupo de trabalho e os drives mapeados. Se quiser usar o PDC, só indo na unha mesmo (mapeamento). Uma curiosidade: quando fui instalar a impressora (que é compartilhada pelo Win) eu vi toda minha rede... Mas usando o próprio Nautilus, nada feito. Sinceramente aconselho a fazer um teste com o konqueror, talvez tenha mais sorte... E por falar, acho que tem um outro navegador para Ambiente de Rede... Não estou me lembrando qual é... Boa sorte irmão! Atenciosamente Eduardo Gomes Junior - Tecnologia da Informação Rio-Tech Engenharia Eletrometalurgia e Projetos ltda ----- Original Message ----- From: "Alan" <[EMAIL PROTECTED]> To: "Lista de discussão do LoCoTeam Brasileiro" <[email protected]> Sent: Thursday, June 14, 2007 1:19 PM Subject: Re: [Ubuntu-BR][HELP]Não enxergo micros da rede!!! Sim, uso o nautilus, quer dizer, tento usar... Quanto ao serviço mensageir creio estar ativado, pois, o outro micro quando ligo no linux ele enxerga todos (linux e windows)! O que acho mais estranho eh que quando dou o comando "smbtree" aparecem todos micros de todas as redes e todos seus diretórios compartilhados, os quais consigo montar manualmente, mas no nautilus NAAAAAAAADA! :-( Em 14/06/07, Eduardo Gomes Jr.<[EMAIL PROTECTED]> escreveu: > Olha nóis de novu... > > Uma pergunta que ainda não te fiz: qual o aplicativo que vc está usando > para > navegar nos micros da rede? > Nautilus? > > Atenciosamente > > Eduardo Gomes Junior - Tecnologia da Informação > Rio-Tech Engenharia Eletrometalurgia e Projetos ltda > > ----- Original Message ----- > From: "Alan" <[EMAIL PROTECTED]> > To: "Lista de discussão do LoCoTeam Brasileiro" > <[email protected]> > Sent: Wednesday, June 13, 2007 9:05 PM > Subject: Re: [Ubuntu-BR][HELP]Não enxergo micros da rede!!! > > > Interessante, eu consigo montar um volume compartilhado em um micro > WINDOWS manualmente, fiz isso: > > $sudo smbmount //GUSTAVO-PC/Jogos /mnt/jogos > > E o volume foi montado normalmente! > > Ou seja, parece estar tudo bem com meu samba.conf, afinal, todos > micros windows podem me acessar e posso montar volumes deles > manualmente, o negócio é fazer aparecer a rede em Locais > Rede, ficar > montando tudo manualmente eh osso neh, ainda mais dependendo de quem > for usar o micro, vai ser pouco pra ficar xingando o linux¬¬ > > > 2007/6/13, Alan <[EMAIL PROTECTED]>: > > Fala, bacana! E aí? > > Bom, achei estranho pq não tava achando nenhum dos micros em windows, > > dae iniciei o outro no linux e consegui encontrá-lo pelo findsmb, o > > mais estranho eh q o resultado do findsmb executado no outro pc com > > linux também não enxerga o windows, mas indo em Locais>Rede o windows > > aparece! > > > > resultado do findsmb: > > > > *=DMB > > +=LMB > > IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION > > --------------------------------------------------------------------- > > 192.168.1.8 ALAN-PC +[MSHOME] [Unix] [Samba 3.0.24] > > 192.168.1.69 GUSTAVO-PC [MSHOME] [Unix] [Samba 3.0.24] > > > > > > brigadão ae pela atenção! > > 2007/6/13, Eduardo Gomes Jr. <[EMAIL PROTECTED]>: > > > Fala Sr Alan, tudo tranquilo? > > > > > > Vc, provavelmente está em um rede NetBIOS, certo? > > > Vc consegue enxergar a galera usando o comando findsmb? > > > > > > # findsmb > > > > > > Se não aparecer o pessoal, verifique o firewall e o serviço mensageiro > > > nos > > > rWindow$ da vida... > > > Normalmente é só isso. > > > > > > Outro detalhe: Vc consegue montar os dispositivos deles em sua > > > máquina? > > > > > > #mount //<IP>/<compartilhamento> /mnt/<pasta> -t smbfs > > > > > > Vamo vê se a gente consegue matar o problema... > > > > > > Atenciosamente > > > > > > Eduardo Gomes Junior - Tecnologia da Informação > > > Rio-Tech Engenharia Eletrometalurgia e Projetos ltda > > > > > > ----- Original Message ----- > > > From: "Alan" <[EMAIL PROTECTED]> > > > To: <[email protected]> > > > Sent: Wednesday, June 13, 2007 12:44 AM > > > Subject: [Ubuntu-BR] [HELP]Não enxergo micros da rede!!! > > > > > > > > > Não consigo enxergar nenhum pc da rede! > > > > > > Minha rede é assim: > > > ALAN-PC => Meu PC soh com UBUNTU > > > GUSTAVO-PC => PC com Windows VISTA e UBUNTU > > > MANEH-PC => PC com Windows XP e Windows VISTA > > > > > > Todos micros se enxergam e comunicam entre si, inclusive com minha > > > máquina!!! Mas não enxergo nenhum deles indo em Locais>Rede também não > > > consegui também digitando "smb://nomedopc" no nautilus. > > > > > > Muito estranho, já que todos me acessam, em todos sistemas > > > operacionais e conseguem, inclusive, leitura e escrita das minhas > > > pastas compartilhadas, somente eu não vejo nada, não importa qual SO > > > seja! > > > > > > Alguém tem idéia do que está faltando? > > > > > > Vou postar o conteúdo do meu smb.conf e o resultado do comando smbtree > > > logo abaixo: > > > > > > ============================================================================ > > > Conteúdo do meu smb.conf: > > > # > > > # Sample configuration file for the Samba suite for Debian GNU/Linux. > > > # > > > # > > > # This is the main Samba configuration file. You should read the > > > # smb.conf(5) manual page in order to understand the options listed > > > # here. Samba has a huge number of configurable options most of which > > > # are not shown in this example > > > # > > > # Any line which starts with a ; (semi-colon) or a # (hash) > > > # is a comment and is ignored. In this example we will use a # > > > # for commentary and a ; for parts of the config file that you > > > # may wish to enable > > > # > > > # NOTE: Whenever you modify this file you should run the command > > > # "testparm" to check that you have not made any basic syntactic > > > # errors. > > > # > > > > > > #======================= Global Settings ======================= > > > > > > [global] > > > > > > ## Browsing/Identification ### > > > > > > # Change this to the workgroup/NT-domain name your Samba server will > > > part of > > > workgroup = MSHOME > > > > > > # server string is the equivalent of the NT Description field > > > server string = %h server (Samba, Ubuntu) > > > > > > # Windows Internet Name Serving Support Section: > > > # WINS Support - Tells the NMBD component of Samba to enable its WINS > > > Server > > > ; wins support = no > > > > > > # WINS Server - Tells the NMBD components of Samba to be a WINS Client > > > # Note: Samba can be either a WINS Server, or a WINS Client, but NOT > > > both > > > ; wins server = w.x.y.z > > > > > > # This will prevent nmbd to search for NetBIOS names through DNS. > > > dns proxy = no > > > > > > # What naming service and in what order should we use to resolve host > > > names > > > # to IP addresses > > > ; name resolve order = lmhosts host wins bcast > > > > > > #### Networking #### > > > > > > # The specific set of interfaces / networks to bind to > > > # This can be either the interface name or an IP address/netmask; > > > # interface names are normally preferred > > > ; interfaces = 127.0.0.0/8 eth0 > > > > > > # Only bind to the named interfaces and/or networks; you must use the > > > # 'interfaces' option above to use this. > > > # It is recommended that you enable this feature if your Samba machine > > > is > > > # not protected by a firewall or is a firewall itself. However, this > > > # option cannot handle dynamic or non-broadcast interfaces correctly. > > > ; bind interfaces only = true > > > > > > > > > > > > #### Debugging/Accounting #### > > > > > > # This tells Samba to use a separate log file for each machine > > > # that connects > > > log file = /var/log/samba/log.%m > > > > > > # Put a capping on the size of the log files (in Kb). > > > max log size = 1000 > > > > > > # If you want Samba to only log through syslog then set the following > > > # parameter to 'yes'. > > > ; syslog only = no > > > > > > # We want Samba to log a minimum amount of information to syslog. > > > Everything > > > # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to > > > log > > > # through syslog you should set the following parameter to something > > > higher. > > > syslog = 0 > > > > > > # Do something sensible when Samba crashes: mail the admin a backtrace > > > panic action = /usr/share/samba/panic-action %d > > > > > > > > > ####### Authentication ####### > > > > > > # "security = user" is always a good idea. This will require a Unix > > > account > > > # in this server for every user accessing the server. See > > > # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html > > > # in the samba-doc package for details. > > > security = share > > > > > > # You may wish to use password encryption. See the section on > > > # 'encrypt passwords' in the smb.conf(5) manpage before enabling. > > > encrypt passwords = true > > > > > > # If you are using encrypted passwords, Samba will need to know what > > > # password database type you are using. > > > passdb backend = tdbsam > > > > > > obey pam restrictions = yes > > > > > > ; guest account = nobody > > > invalid users = root > > > > > > # This boolean parameter controls whether Samba attempts to sync the > > > Unix > > > # password with the SMB password when the encrypted SMB password in > > > the > > > # passdb is changed. > > > ; unix password sync = no > > > > > > # For Unix password sync to work on a Debian GNU/Linux system, the > > > following > > > # parameters must be set (thanks to Ian Kahan > > > <<[EMAIL PROTECTED]> for > > > # sending the correct chat script for the passwd program in Debian > > > Sarge). > > > passwd program = /usr/bin/passwd %u > > > passwd chat = *Enter\snew\sUNIX\spassword:* %n\n > > > *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* > > > . > > > > > > # This boolean controls whether PAM will be used for password changes > > > # when requested by an SMB client instead of the program listed in > > > # 'passwd program'. The default is 'no'. > > > ; pam password change = no > > > > > > ########## Domains ########### > > > > > > # Is this machine able to authenticate users. Both PDC and BDC > > > # must have this setting enabled. If you are the BDC you must > > > # change the 'domain master' setting to no > > > # > > > ; domain logons = yes > > > # > > > # The following setting only takes effect if 'domain logons' is set > > > # It specifies the location of the user's profile directory > > > # from the client point of view) > > > # The following required a [profiles] share to be setup on the > > > # samba server (see below) > > > ; logon path = \\%N\profiles\%U > > > # Another common choice is storing the profile in the user's home > > > directory > > > ; logon path = \\%N\%U\profile > > > > > > # The following setting only takes effect if 'domain logons' is set > > > # It specifies the location of a user's home directory (from the > > > client > > > # point of view) > > > ; logon drive = H: > > > ; logon home = \\%N\%U > > > > > > # The following setting only takes effect if 'domain logons' is set > > > # It specifies the script to run during logon. The script must be > > > stored > > > # in the [netlogon] share > > > # NOTE: Must be store in 'DOS' file format convention > > > ; logon script = logon.cmd > > > > > > # This allows Unix users to be created on the domain controller via > > > the > > > SAMR > > > # RPC pipe. The example command creates a user account with a > > > disabled > > > Unix > > > # password; please adapt to your needs > > > ; add user script = > > > /usr/sbin/adduser --quiet --disabled-password --gecos "" > > > %u > > > > > > ########## Printing ########## > > > > > > # If you want to automatically load your printer list rather > > > # than setting them up individually then you'll need this > > > ; load printers = yes > > > > > > # lpr(ng) printing. You may wish to override the location of the > > > # printcap file > > > ; printing = bsd > > > ; printcap name = /etc/printcap > > > > > > # CUPS printing. See also the cupsaddsmb(8) manpage in the > > > # cupsys-client package. > > > ; printing = cups > > > ; printcap name = cups > > > > > > # When using [print$], root is implicitly a 'printer admin', but you > > > can > > > # also give this right to other users to add drivers and set printer > > > # properties > > > ; printer admin = @lpadmin > > > > > > > > > ############ Misc ############ > > > > > > # Using the following line enables you to customise your configuration > > > # on a per machine basis. The %m gets replaced with the netbios name > > > # of the machine that is connecting > > > ; include = /home/samba/etc/smb.conf.%m > > > > > > # Most people will find that this option gives better performance. > > > # See smb.conf(5) and > > > /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html > > > # for details > > > # You may want to add the following on a Linux system: > > > # SO_RCVBUF=8192 SO_SNDBUF=8192 > > > socket options = TCP_NODELAY > > > > > > # The following parameter is useful only if you have the linpopup > > > package > > > # installed. The samba maintainer and the linpopup maintainer are > > > # working to ease installation and configuration of linpopup and > > > samba. > > > ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm > > > %s' > > > & > > > > > > # Domain Master specifies Samba to be the Domain Master Browser. If > > > this > > > # machine will be configured as a BDC (a secondary logon server), you > > > # must set this to 'no'; otherwise, the default behavior is > > > recommended. > > > ; domain master = auto > > > > > > # Some defaults for winbind (make sure you're not using the ranges > > > # for something else.) > > > ; idmap uid = 10000-20000 > > > ; idmap gid = 10000-20000 > > > ; template shell = /bin/bash > > > > > > #======================= Share Definitions ======================= > > > > > > # Un-comment the following (and tweak the other settings below to > > > suit) > > > # to enable the default home directory shares. This will share each > > > # user's home directory as \\server\username > > > ;[homes] > > > ; comment = Home Directories > > > ; browseable = no > > > > > > # By default, \\server\username shares can be connected to by anyone > > > # with access to the samba server. Un-comment the following parameter > > > # to make sure that only "username" can connect to \\server\username > > > ; valid users = %S > > > > > > # By default, the home directories are exported read-only. Change next > > > # parameter to 'yes' if you want to be able to write to them. > > > ; writable = no > > > > > > # File creation mask is set to 0600 for security reasons. If you want > > > to > > > # create files with group=rw permissions, set next parameter to 0664. > > > ; create mask = 0600 > > > > > > # Directory creation mask is set to 0700 for security reasons. If you > > > want > > > to > > > # create dirs. with group=rw permissions, set next parameter to 0775. > > > ; directory mask = 0700 > > > > > > # Un-comment the following and create the netlogon directory for > > > Domain > > > Logons > > > # (you need to configure Samba to act as a domain controller too.) > > > ;[netlogon] > > > ; comment = Network Logon Service > > > ; path = /home/samba/netlogon > > > ; guest ok = yes > > > ; writable = no > > > ; share modes = no > > > > > > # Un-comment the following and create the profiles directory to store > > > # users profiles (see the "logon path" option above) > > > # (you need to configure Samba to act as a domain controller too.) > > > # The path below should be writable by all users so that their > > > # profile directory may be created the first time they log on > > > ;[profiles] > > > ; comment = Users profiles > > > ; path = /home/samba/profiles > > > ; guest ok = no > > > ; browseable = no > > > ; create mask = 0600 > > > ; directory mask = 0700 > > > > > > wins support = no > > > [printers] > > > comment = All Printers > > > browseable = no > > > path = /var/spool/samba > > > printable = yes > > > public = no > > > writable = no > > > create mode = 0700 > > > > > > # Windows clients look for this share name as a source of downloadable > > > # printer drivers > > > [print$] > > > comment = Printer Drivers > > > path = /var/lib/samba/printers > > > browseable = yes > > > read only = yes > > > guest ok = no > > > # Uncomment to allow remote administration of Windows print drivers. > > > # Replace 'ntadmin' with the name of the group your admin users are > > > # members of. > > > ; write list = root, @ntadmin > > > > > > # A sample share for sharing your CD-ROM with others. > > > ;[cdrom] > > > ; comment = Samba server's CD-ROM > > > ; writable = no > > > ; locking = no > > > ; path = /cdrom > > > ; public = yes > > > > > > # The next two parameters show how to auto-mount a CD-ROM when the > > > # cdrom share is accesed. For this to work /etc/fstab must contain > > > # an entry like this: > > > # > > > # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 > > > # > > > # The CD-ROM gets unmounted automatically after the connection to the > > > # > > > # If you don't want to use auto-mounting/unmounting make sure the CD > > > # is mounted on /cdrom > > > # > > > ; preexec = /bin/mount /cdrom > > > ; postexec = /bin/umount /cdrom > > > > > > > > > [Arquivos Antigos] > > > path = /media/sdb1/Arquivos Antigos > > > available = yes > > > browsable = yes > > > public = yes > > > writable = yes > > > ============================================================================== > > > > > > Resultado de quando digito smbtree no terminal: > > > WORKGROUP > > > \\GUSTAVO-PC > > > \\GUSTAVO-PC\utorrent > > > \\GUSTAVO-PC\Users > > > \\GUSTAVO-PC\Public > > > \\GUSTAVO-PC\Músicas > > > \\GUSTAVO-PC\Jogos > > > \\GUSTAVO-PC\IPC$ IPC remoto > > > \\GUSTAVO-PC\Downloads > > > \\GUSTAVO-PC\D$ Recurso compartilhado padrão > > > \\GUSTAVO-PC\D > > > \\GUSTAVO-PC\Conversores > > > \\GUSTAVO-PC\C$ Recurso compartilhado padrão > > > \\GUSTAVO-PC\ADMIN$ Administração remota > > > MSHOME > > > \\MANEH-PC > > > cli_start_connection: failed to connect to MANEH-PC<20> (0.0.0.0) > > > \\ALAN-PC alan-pc server (Samba, Ubuntu) > > > \\ALAN-PC\IPC$ IPC Service (alan-pc server (Samba, Ubuntu)) > > > \\ALAN-PC\Arquivos Antigos > > > \\ALAN-PC\print$ Printer Drivers > > > > > > ============================================================================ > > > > > > Muito Obrigado! > > > > > > -- > > > Interessado em aprender mais sobre o Ubuntu em português? > > > http://wiki.ubuntu-br.org/ComeceAqui - > > > ubuntu-br mailing list > > > [email protected] > > > https://lists.ubuntu.com/mailman/listinfo/ubuntu-br > > > > > > > > > -- > > > Interessado em aprender mais sobre o Ubuntu em português? > > > http://wiki.ubuntu-br.org/ComeceAqui - > > > ubuntu-br mailing list > > > [email protected] > > > https://lists.ubuntu.com/mailman/listinfo/ubuntu-br > > > > > > > -- > Interessado em aprender mais sobre o Ubuntu em português? > http://wiki.ubuntu-br.org/ComeceAqui - > ubuntu-br mailing list > [email protected] > https://lists.ubuntu.com/mailman/listinfo/ubuntu-br > > > -- > Interessado em aprender mais sobre o Ubuntu em português? > http://wiki.ubuntu-br.org/ComeceAqui - > ubuntu-br mailing list > [email protected] > https://lists.ubuntu.com/mailman/listinfo/ubuntu-br > -- Interessado em aprender mais sobre o Ubuntu em português? http://wiki.ubuntu-br.org/ComeceAqui - ubuntu-br mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-br -- Interessado em aprender mais sobre o Ubuntu em português? http://wiki.ubuntu-br.org/ComeceAqui - ubuntu-br mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
