Dear Oliver, Ah the sights of Paris...
Thanks for the help!!!!! On Sat, 17 Jun 2006, Oliver Grawert wrote: > please attch your /etc/ltsp/dhcpd.conf, the output of: authoritative; subnet 192.168.0.0 netmask 255.255.255.0 { range 192.168.0.20 192.168.0.250; option domain-name "example.com"; option domain-name-servers 192.168.0.1; option broadcast-address 192.168.0.255; option routers 192.168.0.1; option subnet-mask 255.255.255.0; filename "/ltsp/pxelinux.0"; option root-path "/opt/ltsp/i386"; } > ifconfig -a eth0 Link encap:Ethernet HWaddr 52:54:00:D9:93:47 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:185 Base address:0xb000 eth1 Link encap:Ethernet HWaddr 00:E0:4C:EA:77:D9 inet addr:10.0.1.28 Bcast:10.0.255.255 Mask:255.255.0.0 inet6 addr: fe80::2e0:4cff:feea:77d9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:566 errors:0 dropped:0 overruns:0 frame:0 TX packets:391 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54503 (53.2 KiB) TX bytes:50896 (49.7 KiB) Interrupt:193 Base address:0xe800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:82 errors:0 dropped:0 overruns:0 frame:0 TX packets:82 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6261 (6.1 KiB) TX bytes:6261 (6.1 KiB) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > and the output of: tail -50 /var/log/daemon.log > (please run the last directly after a failed start attempt of the dhcp server) > This was a good idea, the /var/log/daemon.log tells the whole story.... [EMAIL PROTECTED]:~# tail /var/log/daemon.log Jun 17 10:31:13 edubuntu dhcpd: Wrote 0 leases to leases file. Jun 17 10:31:13 edubuntu dhcpd: Jun 17 10:31:13 edubuntu dhcpd: No subnet declaration for eth0 (0.0.0.0). Jun 17 10:31:13 edubuntu dhcpd: ** Ignoring requests on eth0. If this is not what Jun 17 10:31:13 edubuntu dhcpd: you want, please write a subnet declaration Jun 17 10:31:13 edubuntu dhcpd: in your dhcpd.conf file for the network segment Jun 17 10:31:13 edubuntu dhcpd: to which interface eth0 is attached. ** Jun 17 10:31:13 edubuntu dhcpd: Jun 17 10:31:13 edubuntu dhcpd: > -- > dhcpd does not start > https://launchpad.net/bugs/50075 > I noticed that Daniel Carrera had the same damn problem as recently as last year. I am optionally attaching the output of the /etc/interfaces file... # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth1 iface eth1 inet static address 10.0.1.28 netmask 255.255.0.0 network 10.0.0.0 broadcast 10.0.255.255 gateway 10.0.1.21 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 10.0.1.21 interfaces (END) Note that eth0 (the one being used for ltsp is not mentioned. Is this on purpose? This is the current Edubuntu 6.06. I want to show this off at the NELS conference Monday. I suppose the question is why does this not run right out of the box? It did in Breezy. If you guys help me I promise to write a nice FAQ about using serial mice... HELP!!! Regards, Flint /************************************ Paul Flint 8 Lague Drive Montpelier, Vermont 05602 http://www.flint.com/home skype: flintinfotech Work: (202) 537-0480 Fax: (703) 852-7089 +1 (802) 552-4143 -- dhcpd does not start https://launchpad.net/bugs/50075 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs