Intrepid fixed the problem for me
dmesg
61)
[ 0.000000] ACPI: BOOT 000FD2DE, 0028 (r1 DELL 8300 7 ASL
61)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 259958
[ 0.000000] Kernel command line:
root=UUID=5dbf866b-9eb7-4033-8502-391b30e9476a ro quiet splash vga=795
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2593.515 MHz processor.
[ 9.960103] Console: colour dummy device 80x25
[ 9.960107] console [tty0] enabled
[ 9.960464] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 9.960864] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.990865] Memory: 1026500k/1048016k available (2177k kernel code, 20860k
reserved, 1006k data, 368k init, 130512k highmem)
[ 9.990875] virtual kernel memory layout:
[ 9.990877] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 9.990878] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.990879] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 9.990880] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 9.990881] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 9.990882] .data : 0xc0320514 - 0xc041bdc4 (1006 kB)
[ 9.990883] .text : 0xc0100000 - 0xc0320514 (2177 kB)
[ 9.990887] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 9.990928] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1,
Nodes=1
[ 10.070784] Calibrating delay using timer specific routine.. 5191.67
BogoMIPS (lpj=10383340)
[ 10.070811] Security Framework initialized
[ 10.070818] SELinux: Disabled at boot.
[ 10.070833] AppArmor: AppArmor initialized
[ 10.070838] Failure registering capabilities with primary security module.
[ 10.070847] Mount-cache hash table entries: 512
[ 10.070984] Initializing cgroup subsys ns
[ 10.070989] Initializing cgroup subsys cpuacct
[ 10.071001] CPU: After generic identify, caps: bfebfbff 00000000 00000000
00000000 00004400 00000000 00000000 00000000
[ 10.071015] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 10.071018] CPU: L2 cache: 512K
[ 10.071020] CPU: Hyper-Threading is disabled
[ 10.071022] CPU: After all inits, caps: bfebfbff 00000000 00000000 00043080
00004400 00000000 00000000 00000000
[ 10.071035] Compat vDSO mapped to ffffe000.
[ 10.071049] Checking 'hlt' instruction... OK.
[ 10.087117] SMP alternatives: switching to UP code
[ 10.088635] Freeing SMP alternatives: 11k freed
[ 10.088757] Early unpacking initramfs... done
[ 10.426493] ACPI: Core revision 20070126
[ 10.438225] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 10.461254] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
[ 10.461290] Total of 1 processors activated (5191.67 BogoMIPS).
[ 10.461417] ENABLING IO-APIC IRQs
[ 10.461589] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.605738] Brought up 1 CPUs
[ 10.605757] CPU0 attaching sched-domain:
[ 10.605760] domain 0: span 01
[ 10.605762] groups: 01
[ 10.605943] net_namespace: 64 bytes
[ 10.605956] Booting paravirtualized kernel on bare hardware
[ 10.606519] Time: 12:09:05 Date: 09/14/08
[ 10.606543] NET: Registered protocol family 16
[ 10.606774] EISA bus registered
[ 10.606798] ACPI: bus type pci registered
[ 10.607589] PCI: PCI BIOS revision 2.10 entry at 0xfbb30, last bus=2
[ 10.607591] PCI: Using configuration type 1
[ 10.607611] Setting up standard PCI resources
[ 10.614629] ACPI: EC: Look up EC in DSDT
[ 10.640722] ACPI: Interpreter enabled
[ 10.640726] ACPI: (supports S0 S1 S3 S4 S5)
[ 10.640744] ACPI: Using IOAPIC for interrupt routing
[ 10.666288] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.666761] HPET at base address 0xfed00000
[ 10.666767] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 10.666771] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[ 10.667246] PCI: Transparent bridge - 0000:00:1e.0
[ 10.667270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.667706] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 10.770780] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 10.771088] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 10.771395] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 10.771700] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 10.772006] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 10.772312] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 10.772616] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15)
*0, disabled.
[ 10.772924] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 10.773141] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.773177] pnp: PnP ACPI init
[ 10.773185] ACPI: bus type pnp registered
[ 10.794148] pnp: PnP ACPI: found 11 devices
[ 10.794151] ACPI: ACPI bus type pnp unregistered
[ 10.794156] PnPBIOS: Disabled by ACPI PNP
[ 10.794417] PCI: Using ACPI for IRQ routing
[ 10.794421] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 10.809291] NET: Registered protocol family 8
[ 10.809294] NET: Registered protocol family 20
[ 10.809416] hpet clockevent registered
[ 10.809421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 10.809426] hpet0: 3 64-bit timers, 14318180 Hz
[ 10.810463] AppArmor: AppArmor Filesystem Enabled
[ 10.813265] Time: tsc clocksource has been installed.
[ 10.821294] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 10.821298] system 00:00: iomem range 0x100000-0xffffff could not be reserved
[ 10.821301] system 00:00: iomem range 0x1000000-0x3ff73fff could not be
reserved
[ 10.821304] system 00:00: iomem range 0xc0000-0xfffff could not be reserved
[ 10.821307] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be
reserved
[ 10.821310] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be
reserved
[ 10.821313] system 00:00: iomem range 0xfed20000-0xfed8ffff could not be
reserved
[ 10.821316] system 00:00: iomem range 0xfecf0000-0xfecf0fff could not be
reserved
[ 10.821319] system 00:00: iomem range 0xffb00000-0xffbfffff could not be
reserved
[ 10.821322] system 00:00: iomem range 0xffc00000-0xffffffff could not be
reserved
[ 10.821336] system 00:0a: ioport range 0x800-0x85f has been reserved
[ 10.821338] system 00:0a: ioport range 0xc00-0xc7f has been reserved
[ 10.821341] system 00:0a: ioport range 0x860-0x8ff could not be reserved
[ 10.851750] PCI: Bridge: 0000:00:01.0
[ 10.851753] IO window: disabled.
[ 10.851758] MEM window: fd000000-feafffff
[ 10.851761] PREFETCH window: f0000000-f7ffffff
[ 10.851766] PCI: Bridge: 0000:00:1e.0
[ 10.851769] IO window: d000-dfff
[ 10.851774] MEM window: fcf00000-fcffffff
[ 10.851778] PREFETCH window: disabled.
[ 10.851794] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 10.851805] NET: Registered protocol family 2
[ 10.889181] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 10.889499] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 10.890038] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 10.890335] TCP: Hash tables configured (established 131072 bind 65536)
[ 10.890339] TCP reno registered
[ 10.901252] checking if image is initramfs... it is
[ 11.312242] Switched to high resolution mode on CPU 0
[ 11.564007] Freeing initrd memory: 7720k freed
[ 11.564152] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[ 11.564155] Simple Boot Flag at 0x7a set to 0x1
[ 11.564569] audit: initializing netlink socket (disabled)
[ 11.564582] audit(1221394145.472:1): initialized
[ 11.564754] highmem bounce pool size: 64 pages
[ 11.566861] VFS: Disk quotas dquot_6.5.1
[ 11.566945] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 11.567083] io scheduler noop registered
[ 11.567085] io scheduler anticipatory registered
[ 11.567087] io scheduler deadline registered
[ 11.567100] io scheduler cfq registered (default)
[ 11.567188] Boot video device is 0000:01:00.0
[ 11.567194] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled,
disabling
[ 11.567497] isapnp: Scanning for PnP cards...
[ 11.920718] isapnp: No Plug & Play device found
[ 11.953673] Real Time Clock Driver v1.12ac
[ 11.953766] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 11.953880] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.954676] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.955730] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 11.955802] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 11.955912] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
[ 11.955916] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 11.956441] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.966860] mice: PS/2 mouse device common for all mice
[ 11.966988] EISA: Probing bus 0 at eisa.0
[ 11.967022] EISA: Detected 0 cards.
[ 11.967025] cpuidle: using governor ladder
[ 11.967027] cpuidle: using governor menu
[ 11.967117] NET: Registered protocol family 1
[ 11.967147] Using IPI No-Shortcut mode
[ 11.967178] registered taskstats version 1
[ 11.967277] Magic number: 8:956:177
[ 11.967315] hash matches device ttyr3
[ 11.967384] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 11.967386] EDD information not available.
[ 11.967632] Freeing unused kernel memory: 368k freed
[ 11.994718] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 12.081664] vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using
10240k, total 65536k
[ 12.081669] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 12.081671] vesafb: protected mode interface info at c000:f2f0
[ 12.081674] vesafb: pmi: set display start = c00cf326, set palette = c00cf390
[ 12.081676] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9
3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 12.081692] vesafb: scrolling: redraw
[ 12.081694] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 12.081830] Console: switching to colour frame buffer device 160x64
[ 12.174752] fb0: VESA VGA frame buffer device
[ 13.411333] fuse init (API version 7.9)
[ 13.432186] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 13.990462] usbcore: registered new interface driver usbfs
[ 13.990487] usbcore: registered new interface driver hub
[ 13.996876] usbcore: registered new device driver usb
[ 14.006384] USB Universal Host Controller Interface driver v3.0
[ 14.006451] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 14.006463] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 14.006466] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.006712] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 14.006740] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[ 14.006882] usb usb1: configuration #1 chosen from 1 choice
[ 14.006909] hub 1-0:1.0: USB hub found
[ 14.006916] hub 1-0:1.0: 2 ports detected
[ 14.078443] SCSI subsystem initialized
[ 14.110986] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 17
[ 14.110999] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.111003] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.111028] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 14.111053] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 14.111164] usb usb2: configuration #1 chosen from 1 choice
[ 14.111192] hub 2-0:1.0: USB hub found
[ 14.111198] hub 2-0:1.0: 2 ports detected
[ 14.156542] libata version 3.00 loaded.
[ 14.159165] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 14.159169] e100: Copyright(c) 1999-2006 Intel Corporation
[ 14.214000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 14.214013] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.214017] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.214041] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 14.214065] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 14.214175] usb usb3: configuration #1 chosen from 1 choice
[ 14.214205] hub 3-0:1.0: USB hub found
[ 14.214211] hub 3-0:1.0: 2 ports detected
[ 14.265503] FDC 0 is a post-1991 82077
[ 14.317772] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) ->
IRQ 16
[ 14.317784] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 14.317788] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 14.317812] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 14.317835] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
[ 14.317953] usb usb4: configuration #1 chosen from 1 choice
[ 14.317980] hub 4-0:1.0: USB hub found
[ 14.317986] hub 4-0:1.0: 2 ports detected
[ 14.421679] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) ->
IRQ 19
[ 14.421693] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 14.421697] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 14.421723] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 14.425622] ehci_hcd 0000:00:1d.7: debug port 1
[ 14.425629] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 14.425639] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800
[ 14.441413] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 14.441547] usb usb5: configuration #1 chosen from 1 choice
[ 14.441575] hub 5-0:1.0: USB hub found
[ 14.441582] hub 5-0:1.0: 8 ports detected
[ 14.545461] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 14.568962] e100: eth0: e100_probe: addr 0xfcffb000, irq 20, MAC addr
00:07:e9:52:0e:e0
[ 14.569002] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) ->
IRQ 21
[ 14.618680] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]
MMIO=[fcffa800-fcffafff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 14.624862] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 18
[ 14.624900] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 14.624914] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 14.624928] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) ->
IRQ 18
[ 14.624949] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 14.624960] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 14.631711] ata_piix 0000:00:1f.1: version 2.12
[ 14.631730] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 18
[ 14.631769] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 14.633884] scsi0 : ata_piix
[ 14.634794] scsi1 : ata_piix
[ 14.634840] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 14.634844] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 14.816872] ata1.00: HPA unlocked: 156250000 -> 156301488, native 156301488
[ 14.816878] ata1.00: ATA-5: WDC WD800BB-75CAA0, 16.06V16, max UDMA/100
[ 14.816881] ata1.00: 156301488 sectors, multi 8: LBA
[ 14.824801] ata1.01: ATA-7: WDC WD1600AABB-00PUA0, 00.07H00, max UDMA/100
[ 14.824805] ata1.01: 312581808 sectors, multi 8: LBA48
[ 14.841850] ata1.00: configured for UDMA/100
[ 14.849515] ata1.01: configured for UDMA/100
[ 15.167839] usb 5-8: new high speed USB device using ehci_hcd and address 3
[ 15.435654] ata2.00: ATAPI: SAMSUNG DVD-ROM SD-616T, F310, max UDMA/33
[ 15.435682] ata2.01: ATAPI: LITE-ON DVDRW SOHW-1653S, CS07, max UDMA/66
[ 15.599245] ata2.00: configured for UDMA/33
[ 15.770751] ata2.01: configured for UDMA/66
[ 15.770871] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-75CA 16.0
PQ: 0 ANSI: 5
[ 15.771287] scsi 0:0:1:0: Direct-Access ATA WDC WD1600AABB-0 00.0
PQ: 0 ANSI: 5
[ 15.771932] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616T F310
PQ: 0 ANSI: 5
[ 15.772749] scsi 1:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1653S CS07
PQ: 0 ANSI: 5
[ 15.772817] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 15.772835] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) ->
IRQ 18
[ 15.772870] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 15.773199] scsi2 : ata_piix
[ 15.773367] scsi3 : ata_piix
[ 15.773402] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
[ 15.773404] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
[ 16.568822] ieee1394: Error parsing configrom for node 0-00:1023
[ 16.568927] ieee1394: Host added: ID:BUS[0-01:1023] GUID[00309500a0031ecb]
[ 17.434849] Driver 'sd' needs updating - please use bus_type methods
[ 17.434977] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 17.434992] sd 0:0:0:0: [sda] Write Protect is off
[ 17.434995] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.435018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 17.435069] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 17.435082] sd 0:0:0:0: [sda] Write Protect is off
[ 17.435085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.435106] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 17.435110] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 17.455021] sda1 sda2
[ 17.455109] sd 0:0:0:0: [sda] Attached SCSI disk
[ 17.455182] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 17.455197] sd 0:0:1:0: [sdb] Write Protect is off
[ 17.455200] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 17.455223] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 17.455270] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 17.455283] sd 0:0:1:0: [sdb] Write Protect is off
[ 17.455285] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 17.455306] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 17.455310] sdb: sdb1 sdb2 < sdb5 >
[ 17.489242] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 17.499618] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.499641] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 17.499660] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 17.499719] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 17.501552] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[ 17.501557] Uniform CD-ROM driver Revision: 3.20
[ 17.501614] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 17.507067] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 17.507128] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 18.031923] Attempting manual resume
[ 18.031928] swsusp: Resume From Partition 8:21
[ 18.031929] PM: Checking swsusp image.
[ 18.032142] PM: Resume from disk failed.
[ 18.055086] kjournald starting. Commit interval 5 seconds
[ 18.055103] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.969243] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 28.279461] intel_rng: Firmware space is locked read-only. If you can't or
[ 28.279464] intel_rng: don't want to disable this in firmware setup, and if
[ 28.279466] intel_rng: you are certain that your system has a functional
[ 28.279467] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 28.323389] EDAC MC: Ver: 2.1.0 Aug 25 2008
[ 28.423212] parport_pc 00:09: reported by Plug and Play ACPI
[ 28.423262] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
[ 28.472310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 28.519338] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.630778] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 28.882187] EDAC i82875p: i82875p init one
[ 28.914524] PCI: Unable to reserve mem region #1:[EMAIL PROTECTED] for
device 0000:00:06.0
[ 28.914583] EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV
0000:00:00.0
[ 28.914611] EDAC PCI0: Giving out device to module 'i82875p_edac' controller
'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 28.949997] iTCO_vendor_support: vendor-support=0
[ 28.973948] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 28.974036] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1,
TCOBASE=0x0860)
[ 28.974068] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 29.007552] input: Power Button (FF) as /devices/virtual/input/input3
[ 29.065842] ACPI: Power Button (FF) [PWRF]
[ 29.065929] input: Power Button (CM) as /devices/virtual/input/input4
[ 29.093730] ACPI: Power Button (CM) [VBTN]
[ 29.118962] Linux agpgart interface v0.102
[ 30.451326] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) ->
IRQ 22
[ 30.451350] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 30.873894] intel8x0_measure_ac97_clock: measured 52403 usecs
[ 30.873898] intel8x0: clocking to 48000
[ 32.338867] lp0: using parport0 (interrupt-driven).
[ 32.439478] Adding 3028212k swap on /dev/sdb5. Priority:-1 extents:1
across:3028212k
[ 32.997179] EXT3 FS on sdb1, internal journal
[ 33.200492] device-mapper: uevent: version 1.0.3
[ 33.200522] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised:
[EMAIL PROTECTED]
[ 34.533309] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.006457] No dock devices found.
[ 35.260485] usb 5-8: configuration #1 chosen from 1 choice
[ 36.549523] ppdev: user-space parallel port driver
[ 36.771338] audit(1221386970.564:2): type=1503 operation="inode_permission"
requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4990
profile="/usr/sbin/cupsd" namespace="default"
[ 36.839508] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 36.839514] apm: overridden by ACPI.
[ 37.699121] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 37.811335] Bluetooth: Core ver 2.11
[ 37.811943] NET: Registered protocol family 31
[ 37.811948] Bluetooth: HCI device and connection manager initialized
[ 37.811952] Bluetooth: HCI socket layer initialized
[ 37.836918] Bluetooth: L2CAP ver 2.9
[ 37.836923] Bluetooth: L2CAP socket layer initialized
[ 37.893211] Bluetooth: RFCOMM socket layer initialized
[ 37.893226] Bluetooth: RFCOMM TTY layer initialized
[ 37.893228] Bluetooth: RFCOMM ver 1.8
[ 41.879105] NET: Registered protocol family 17
[ 43.221107] NET: Registered protocol family 10
[ 43.221391] lo: Disabled Privacy Extensions
[ 53.436915] eth0: no IPv6 routers present
[ 55.217623] usbcore: registered new interface driver libusual
[ 55.258481] Initializing USB Mass Storage driver...
[ 55.456547] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 55.631668] usb 3-1: configuration #1 chosen from 1 choice
[ 55.648153] scsi4 : SCSI emulation for USB Mass Storage devices
[ 55.650273] usbcore: registered new interface driver usb-storage
[ 55.650282] USB Mass Storage support registered.
[ 55.650742] usb-storage: device found at 3
[ 55.650746] usb-storage: waiting for device to settle before scanning
[ 55.742449] usbcore: registered new interface driver hiddev
[ 55.755537] input: Logitech Optical USB Mouse as
/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input5
[ 55.783916] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse]
on usb-0000:00:1d.2-1
[ 55.783938] usbcore: registered new interface driver usbhid
[ 55.783942] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 61.643146] usb-storage: device scan complete
[ 67.243025] usb 5-8: reset high speed USB device using ehci_hcd and address 3
[ 82.322350] usb 5-8: device descriptor read/64, error -110
[ 97.509448] usb 5-8: device descriptor read/64, error -110
[ 97.728972] usb 5-8: reset high speed USB device using ehci_hcd and address 3
[ 112.808304] usb 5-8: device descriptor read/64, error -110
[ 127.991411] usb 5-8: device descriptor read/64, error -110
[ 128.206943] usb 5-8: reset high speed USB device using ehci_hcd and address 3
[ 133.216198] usb 5-8: device descriptor read/8, error -110
[ 138.325164] usb 5-8: device descriptor read/8, error -110
[ 138.540561] usb 5-8: reset high speed USB device using ehci_hcd and address 3
[ 143.549842] usb 5-8: device descriptor read/8, error -110
[ 148.658705] usb 5-8: device descriptor read/8, error -110
[ 148.762434] usb 5-8: USB disconnect, address 3
[ 148.762651] scsi 4:0:0:0: Device offlined - not ready after error recovery
[ 148.874183] usb 5-8: new high speed USB device using ehci_hcd and address 4
[ 163.953513] usb 5-8: device descriptor read/64, error -110
[ 179.136623] usb 5-8: device descriptor read/64, error -110
[ 179.352147] usb 5-8: new high speed USB device using ehci_hcd and address 5
[ 194.431548] usb 5-8: device descriptor read/64, error -110
[ 209.614635] usb 5-8: device descriptor read/64, error -110
[ 209.830119] usb 5-8: new high speed USB device using ehci_hcd and address 6
[ 214.839490] usb 5-8: device descriptor read/8, error -110
[ 219.948380] usb 5-8: device descriptor read/8, error -110
[ 220.163739] usb 5-8: new high speed USB device using ehci_hcd and address 7
[ 225.172952] usb 5-8: device descriptor read/8, error -110
[ 230.281920] usb 5-8: device descriptor read/8, error -110
[ 283.769934] usb 5-8: new high speed USB device using ehci_hcd and address 8
[ 285.064646] ehci_hcd 0000:00:1d.7: port 8 reset error -110
[ 285.064655] hub 5-0:1.0: hub_port_status failed (err = -32)
uname -a
Linux julian-desktop 2.6.24-21-generic #1 SMP Mon Aug 25 17:32:09 UTC 2008 i686
GNU/Linux
[EMAIL PROTECTED]:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 8.04.1
Release: 8.04
Codename: hardy
[EMAIL PROTECTED]:~$
[EMAIL PROTECTED]:~$ lsusb -v
Bus 005 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
can't get hub descriptor: Operation not permitted
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 003 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc016 M-UV69a Optical Wheel Mouse
bcdDevice 3.40
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
--
usb connect problems
https://bugs.launchpad.net/bugs/231049
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
