$uname -a Linux aariz-desktop 2.6.24-21-generic #1 SMP Mon Aug 25 17:32:09 UTC 2008 i686 GNU/Linux
$lsb_release -rd Description: Ubuntu 8.04.1 Release: 8.04 $lspci | grep audio 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) $dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-21-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Aug 25 17:32:09 UTC 2008 (Ubuntu 2.6.24-21.42-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5be0 [ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261872 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261872 [ 0.000000] On node 0 totalpages: 261872 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32243 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7620 checksum 0 [ 0.000000] ACPI: RSDP 000F7620, 0014 (r0 AWARD ) [ 0.000000] ACPI: RSDT 3FEF3040, 002C (r1 AWARD AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 AWARD AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FEF3180, 3CB0 (r1 AWARD AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEF0000, 0040 [ 0.000000] ACPI: APIC 3FEF6E80, 0068 (r1 AWARD AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:3 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827 [ 0.000000] Kernel command line: root=UUID=583fb5ca-d295-4e91-85a2-8f5abc714910 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2672.784 MHz processor. [ 21.968380] Console: colour VGA+ 80x25 [ 21.968384] console [tty0] enabled [ 21.968845] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 21.969262] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 21.998965] Memory: 1025968k/1047488k available (2177k kernel code, 20832k reserved, 1006k data, 368k init, 129984k highmem) [ 21.998974] virtual kernel memory layout: [ 21.998976] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 21.998977] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 21.998978] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 21.998979] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 21.998980] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 21.998982] .data : 0xc0320514 - 0xc041bdc4 (1006 kB) [ 21.998983] .text : 0xc0100000 - 0xc0320514 (2177 kB) [ 21.998986] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 21.999041] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 22.079043] Calibrating delay using timer specific routine.. 5349.66 BogoMIPS (lpj=10699327) [ 22.079077] Security Framework initialized [ 22.079084] SELinux: Disabled at boot. [ 22.079103] AppArmor: AppArmor initialized [ 22.079109] Failure registering capabilities with primary security module. [ 22.079119] Mount-cache hash table entries: 512 [ 22.079273] Initializing cgroup subsys ns [ 22.079279] Initializing cgroup subsys cpuacct [ 22.079293] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000 [ 22.079303] monitor/mwait feature present. [ 22.079305] using mwait in idle threads. [ 22.079312] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 22.079315] CPU: L2 cache: 1024K [ 22.079318] CPU: Hyper-Threading is disabled [ 22.079320] CPU: After all inits, caps: bfebfbff 00000000 00000000 00043180 0000441d 00000000 00000000 00000000 [ 22.079333] Compat vDSO mapped to ffffe000. [ 22.079352] Checking 'hlt' instruction... OK. [ 22.095559] SMP alternatives: switching to UP code [ 22.097575] Freeing SMP alternatives: 11k freed [ 22.097710] Early unpacking initramfs... done [ 22.446422] ACPI: Core revision 20070126 [ 22.446479] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 22.449607] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 04 [ 22.449644] Total of 1 processors activated (5349.66 BogoMIPS). [ 22.449743] ENABLING IO-APIC IRQs [ 22.449911] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 22.594959] Brought up 1 CPUs [ 22.594981] CPU0 attaching sched-domain: [ 22.594985] domain 0: span 01 [ 22.594987] groups: 01 [ 22.595181] net_namespace: 64 bytes [ 22.595189] Booting paravirtualized kernel on bare hardware [ 22.595806] Time: 14:13:43 Date: 09/17/08 [ 22.595833] NET: Registered protocol family 16 [ 22.596085] EISA bus registered [ 22.596108] ACPI: bus type pci registered [ 22.622136] PCI: PCI BIOS revision 2.10 entry at 0xfb530, last bus=1 [ 22.622138] PCI: Using configuration type 1 [ 22.622144] Setting up standard PCI resources [ 22.630081] ACPI: EC: Look up EC in DSDT [ 22.634413] ACPI: Interpreter enabled [ 22.634417] ACPI: (supports S0 S3 S4 S5) [ 22.634434] ACPI: Using IOAPIC for interrupt routing [ 22.639896] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.640854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.662188] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15) [ 22.662312] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled. [ 22.662431] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15) [ 22.662549] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15) [ 22.662667] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 14 15) [ 22.662787] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 14 15) [ 22.662915] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 9 10 11 14 15) [ 22.663036] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 14 15) [ 22.663171] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.663210] pnp: PnP ACPI init [ 22.663218] ACPI: bus type pnp registered [ 22.663464] pnpacpi: exceeded the max number of mem resources: 12 [ 22.666257] pnp: PnP ACPI: found 11 devices [ 22.666260] ACPI: ACPI bus type pnp unregistered [ 22.666265] PnPBIOS: Disabled by ACPI PNP [ 22.666547] PCI: Using ACPI for IRQ routing [ 22.666550] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.702890] NET: Registered protocol family 8 [ 22.702893] NET: Registered protocol family 20 [ 22.702971] AppArmor: AppArmor Filesystem Enabled [ 22.706880] Time: tsc clocksource has been installed. [ 22.714926] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 22.714930] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 22.714933] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 22.714936] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 22.714939] system 00:00: iomem range 0x3ff00000-0x3fffffff has been reserved [ 22.714942] system 00:00: iomem range 0x3fef0000-0x3fefffff could not be reserved [ 22.714945] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved [ 22.714948] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 22.714951] system 00:00: iomem range 0x100000-0x3feeffff could not be reserved [ 22.714953] system 00:00: iomem range 0xffee0000-0xffefffff could not be reserved [ 22.714956] system 00:00: iomem range 0xfffe0000-0xfffeffff could not be reserved [ 22.714959] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved [ 22.714967] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 22.714969] system 00:02: ioport range 0x800-0x805 has been reserved [ 22.714972] system 00:02: ioport range 0x290-0x297 has been reserved [ 22.714974] system 00:02: ioport range 0x880-0x88f has been reserved [ 22.745484] PCI: Bridge: 0000:00:01.0 [ 22.745487] IO window: disabled. [ 22.745493] MEM window: e0000000-e1ffffff [ 22.745499] PREFETCH window: d8000000-dfffffff [ 22.745522] NET: Registered protocol family 2 [ 22.782937] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 22.783262] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 22.783936] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 22.784444] TCP: Hash tables configured (established 131072 bind 65536) [ 22.784447] TCP reno registered [ 22.795052] checking if image is initramfs... it is [ 23.246741] Switched to high resolution mode on CPU 0 [ 23.489933] Freeing initrd memory: 7699k freed [ 23.490748] audit: initializing netlink socket (disabled) [ 23.490766] audit(1221660824.388:1): initialized [ 23.490960] highmem bounce pool size: 64 pages [ 23.493215] VFS: Disk quotas dquot_6.5.1 [ 23.493303] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 23.493455] io scheduler noop registered [ 23.493458] io scheduler anticipatory registered [ 23.493460] io scheduler deadline registered [ 23.493472] io scheduler cfq registered (default) [ 23.574584] Boot video device is 0000:01:00.0 [ 23.574892] isapnp: Scanning for PnP cards... [ 23.926730] isapnp: No Plug & Play device found [ 23.963570] Real Time Clock Driver v1.12ac [ 23.963682] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 23.963811] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.963954] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 23.964680] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.964998] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 23.965933] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 23.966011] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 23.966130] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 23.966133] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 23.966244] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.966696] mice: PS/2 mouse device common for all mice [ 23.966836] EISA: Probing bus 0 at eisa.0 [ 23.966844] Cannot allocate resource for EISA slot 1 [ 23.966855] Cannot allocate resource for EISA slot 4 [ 23.966873] EISA: Detected 0 cards. [ 23.966877] cpuidle: using governor ladder [ 23.966879] cpuidle: using governor menu [ 23.966970] NET: Registered protocol family 1 [ 23.967000] Using IPI No-Shortcut mode [ 23.967036] registered taskstats version 1 [ 23.967122] Magic number: 8:946:232 [ 23.967148] hash matches device ttyv2 [ 23.967227] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 23.967229] EDD information not available. [ 23.967468] Freeing unused kernel memory: 368k freed [ 23.989903] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 25.227723] fuse init (API version 7.9) [ 25.244352] ACPI: Fan [FAN] (on) [ 25.250928] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126] [ 25.250943] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126] [ 25.250955] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126] [ 25.252599] ACPI: Thermal Zone [THRM] (48 C) [ 25.869366] SCSI subsystem initialized [ 25.944322] usbcore: registered new interface driver usbfs [ 25.944351] usbcore: registered new interface driver hub [ 25.965695] libata version 3.00 loaded. [ 25.970125] usbcore: registered new device driver usb [ 25.974582] 8139too Fast Ethernet driver 0.9.28 [ 25.974650] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 16 [ 25.975285] eth0: RealTek RTL8139 at 0xdc00, 00:19:e0:6b:6e:34, IRQ 16 [ 25.975288] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 25.975310] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 18 (level, low) -> IRQ 17 [ 25.975935] eth1: RealTek RTL8139 at 0xe000, 00:11:5b:fe:56:72, IRQ 17 [ 25.975938] eth1: Identified 8139 chip type 'RTL-8100B/8139D' [ 25.990478] pata_sis 0000:00:02.5: version 0.5.2 [ 25.990531] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 18 [ 26.002425] scsi0 : pata_sis [ 26.013131] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 26.021160] scsi1 : pata_sis [ 26.021918] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14 [ 26.021921] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15 [ 26.030381] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 26.185975] ata1.00: ATA-6: WDC WD800BB-22JHA0, 05.01C05, max UDMA/100 [ 26.185981] ata1.00: 156301488 sectors, multi 16: LBA [ 26.194032] ata1.00: configured for UDMA/100 [ 26.529717] ata2.00: ATAPI: SONY DVD RW DRU-190A, 1.61, max UDMA/66 [ 26.717645] ata2.00: configured for UDMA/66 [ 26.717792] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-22JH 05.0 PQ: 0 ANSI: 5 [ 26.719291] scsi 1:0:0:0: CD-ROM SONY DVD RW DRU-190A 1.61 PQ: 0 ANSI: 5 [ 26.722844] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 26.722858] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 26.723119] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 26.723137] ohci_hcd 0000:00:03.0: irq 19, io mem 0xe4003000 [ 26.779508] usb usb1: configuration #1 chosen from 1 choice [ 26.779541] hub 1-0:1.0: USB hub found [ 26.779551] hub 1-0:1.0: 3 ports detected [ 26.881430] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 26.881447] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 26.881475] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 26.881491] ohci_hcd 0000:00:03.1: irq 20, io mem 0xe4004000 [ 26.939408] usb usb2: configuration #1 chosen from 1 choice [ 26.939438] hub 2-0:1.0: USB hub found [ 26.939448] hub 2-0:1.0: 3 ports detected [ 27.041347] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 27.041360] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 27.041386] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 27.041400] ohci_hcd 0000:00:03.2: irq 21, io mem 0xe4000000 [ 27.099349] usb usb3: configuration #1 chosen from 1 choice [ 27.099378] hub 3-0:1.0: USB hub found [ 27.099387] hub 3-0:1.0: 2 ports detected [ 27.185222] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 27.201614] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 22 [ 27.201628] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 27.201658] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 [ 27.201693] PCI: cache line size of 128 is not supported by device 0000:00:03.3 [ 27.201704] ehci_hcd 0000:00:03.3: irq 22, io mem 0xe4001000 [ 27.373143] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 27.373287] usb usb4: configuration #1 chosen from 1 choice [ 27.373318] hub 4-0:1.0: USB hub found [ 27.373327] hub 4-0:1.0: 8 ports detected [ 27.496179] Driver 'sd' needs updating - please use bus_type methods [ 27.496285] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 27.496303] sd 0:0:0:0: [sda] Write Protect is off [ 27.496307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.496332] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.496391] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 27.496405] sd 0:0:0:0: [sda] Write Protect is off [ 27.496409] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.496432] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.496437] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 27.509149] sda1 sda2 sda3 < sda5 sda6 sda7 > [ 27.551487] sd 0:0:0:0: [sda] Attached SCSI disk [ 27.558428] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 27.558454] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 27.564340] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 27.564346] Uniform CD-ROM driver Revision: 3.20 [ 27.564407] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 27.768994] usb 1-2: device not accepting address 2, error -62 [ 28.070105] Attempting manual resume [ 28.070109] swsusp: Resume From Partition 8:7 [ 28.070111] PM: Checking swsusp image. [ 28.070453] PM: Resume from disk failed. [ 28.086225] EXT3-fs: INFO: recovery required on readonly filesystem. [ 28.086230] EXT3-fs: write access will be enabled during recovery. [ 28.440742] usb 1-2: new low speed USB device using ohci_hcd and address 4 [ 28.653481] usb 1-2: configuration #1 chosen from 1 choice [ 28.674221] usbcore: registered new interface driver hiddev [ 28.679571] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:03.0/usb1/1-2/1-2:1.0/input/input2 [ 28.688706] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.0-2 [ 28.688725] usbcore: registered new interface driver usbhid [ 28.688730] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 33.384975] kjournald starting. Commit interval 5 seconds [ 33.384997] EXT3-fs: sda2: orphan cleanup on readonly fs [ 33.385006] ext3_orphan_cleanup: deleting unreferenced inode 205349 [ 33.396460] ext3_orphan_cleanup: deleting unreferenced inode 187699 [ 33.403175] EXT3-fs: sda2: 2 orphan inodes deleted [ 33.403177] EXT3-fs: recovery complete. [ 33.413446] EXT3-fs: mounted filesystem with ordered data mode. [ 40.044576] Linux agpgart interface v0.102 [ 40.080462] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 40.116682] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 40.204438] agpgart: Detected SiS chipset - id:1608 [ 40.212829] agpgart: AGP aperture is 128M @ 0xd0000000 [ 40.324496] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 40.746047] input: Power Button (FF) as /devices/virtual/input/input4 [ 40.760150] ACPI: Power Button (FF) [PWRF] [ 40.760282] input: Power Button (CM) as /devices/virtual/input/input5 [ 40.772140] ACPI: Power Button (CM) [PWRB] [ 40.772225] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 40.788151] ACPI: Sleep Button (CM) [FUTS] [ 40.851422] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 41.641677] nvidia: module license 'NVIDIA' taints kernel. [ 42.344132] NET: Registered protocol family 10 [ 42.344397] lo: Disabled Privacy Extensions [ 42.455661] parport_pc 00:09: reported by Plug and Play ACPI [ 42.455737] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 43.264181] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17 [ 43.587105] intel8x0_measure_ac97_clock: measured 54838 usecs [ 43.587110] intel8x0: clocking to 48000 [ 43.588020] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 43.588274] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 45.963889] lp0: using parport0 (interrupt-driven). [ 46.024156] Adding 1020088k swap on /dev/sda7. Priority:-1 extents:1 across:1020088k [ 46.587217] EXT3 FS on sda2, internal journal [ 47.314701] kjournald starting. Commit interval 5 seconds [ 47.314932] EXT3 FS on sda6, internal journal [ 47.314938] EXT3-fs: mounted filesystem with ordered data mode. [ 47.687010] ip_tables: (C) 2000-2006 Netfilter Core Team [ 47.937763] PPP generic driver version 2.4.2 [ 47.966901] NET: Registered protocol family 17 [ 47.989573] NET: Registered protocol family 24 [ 48.460413] No dock devices found. [ 49.543231] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 49.543238] apm: overridden by ACPI. [ 49.627113] ppdev: user-space parallel port driver [ 49.752444] audit(1221632050.881:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4838 profile="/usr/sbin/cupsd" namespace="default" [ 50.697111] eth0: link down [ 50.698692] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 50.801598] Bluetooth: Core ver 2.11 [ 50.802282] NET: Registered protocol family 31 [ 50.802287] Bluetooth: HCI device and connection manager initialized [ 50.802292] Bluetooth: HCI socket layer initialized [ 50.837617] Bluetooth: L2CAP ver 2.9 [ 50.837623] Bluetooth: L2CAP socket layer initialized [ 50.903893] Bluetooth: RFCOMM socket layer initialized [ 50.904164] Bluetooth: RFCOMM TTY layer initialized [ 50.904169] Bluetooth: RFCOMM ver 1.8 [ 52.847629] eth1: no IPv6 routers present [ 52.948320] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 52.948340] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 52.948344] agpgart: SiS delay workaround: giving bridge time to recover. [ 52.963642] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode -- I can't listen logout sound https://bugs.launchpad.net/bugs/267304 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
