This is my final dmesg.. i guess i have a little problem since while starting my system freezes a litte, but i dont know how to solve it... since i am a beginner :) yuppyyyyy
[ 0.000000] Linux version 2.6.24-3-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 20071223 (prerelease) (Ubuntu 4.2.2-4ubuntu3)) #1 SMP Thu Jan 3 23:30:29 UTC 2008 (Ubuntu 2.6.24-3.5-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) [ 0.000000] BIOS-e820: 000000003fe90000 - 000000003fe9d000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fe9d000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 261776) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261776 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261776 [ 0.000000] On node 0 totalpages: 261776 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32147 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6780 checksum 0 [ 0.000000] ACPI: RSDP 000F6780, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3FE97449, 0048 (r1 Sony V0 20051109 PTL 0) [ 0.000000] ACPI: FACP 3FE9CE78, 0084 (r2 Sony V0 20051109 PTL 50) [ 0.000000] ACPI: DSDT 3FE989FD, 447B (r1 Sony V0 20051109 PTL 100000E) [ 0.000000] ACPI: FACS 3FEADFC0, 0040 [ 0.000000] ACPI: APIC 3FE9CEFC, 0068 (r1 Sony V0 20051109 PTL 50) [ 0.000000] ACPI: BOOT 3FE9CFD8, 0028 (r1 Sony V0 20051109 PTL 1) [ 0.000000] ACPI: MCFG 3FE9CF9C, 003C (r1 Sony V0 20051109 PTL 5F) [ 0.000000] ACPI: SSDT 3FE983AA, 064F (r1 Sony V0 20051109 PTL 20030224) [ 0.000000] ACPI: SSDT 3FE97D0E, 069C (r1 Sony V0 20051109 PTL 20030224) [ 0.000000] ACPI: SSDT 3FE978C9, 0277 (r1 Sony V0 20051109 PTL 20030224) [ 0.000000] ACPI: SSDT 3FE976AA, 021F (r1 Sony V0 20051109 PTL 20030224) [ 0.000000] ACPI: SSDT 3FE97491, 0219 (r1 Sony V0 20051109 PTL 20030224) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d8000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d8000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259731 [ 0.000000] Kernel command line: root=UUID=ba2ffa87-b491-4a2f-b566-462320fd4b4f ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1862.060 MHz processor. [ 10.746579] Console: colour VGA+ 80x25 [ 10.746583] console [tty0] enabled [ 10.746880] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.747275] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.775939] Memory: 1025648k/1047104k available (2127k kernel code, 20760k reserved, 988k data, 364k init, 129600k highmem) [ 10.775947] virtual kernel memory layout: [ 10.775948] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 10.775949] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.775950] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.775951] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.775952] .init : 0xc0411000 - 0xc046c000 ( 364 kB) [ 10.775953] .data : 0xc0313c7d - 0xc040ad64 ( 988 kB) [ 10.775955] .text : 0xc0100000 - 0xc0313c7d (2127 kB) [ 10.775958] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.775990] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 10.855883] Calibrating delay using timer specific routine.. 3728.14 BogoMIPS (lpj=7456285) [ 10.855905] Security Framework initialized [ 10.855911] SELinux: Disabled at boot. [ 10.855914] Capability LSM initialized [ 10.855926] Mount-cache hash table entries: 512 [ 10.856040] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000 [ 10.856052] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.856054] CPU: L2 cache: 2048K [ 10.856057] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000 [ 10.856065] Compat vDSO mapped to ffffe000. [ 10.856075] Checking 'hlt' instruction... OK. [ 10.872186] SMP alternatives: switching to UP code [ 10.873863] Freeing SMP alternatives: 11k freed [ 10.873961] Early unpacking initramfs... done [ 11.218539] ACPI: Core revision 20070126 [ 11.218594] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 11.223114] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 [ 11.223140] Total of 1 processors activated (3728.14 BogoMIPS). [ 11.223358] ENABLING IO-APIC IRQs [ 11.223551] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 11.371079] Brought up 1 CPUs [ 11.371105] CPU0 attaching sched-domain: [ 11.371108] domain 0: span 01 [ 11.371110] groups: 01 [ 11.371263] net_namespace: 64 bytes [ 11.371271] Booting paravirtualized kernel on bare hardware [ 11.371716] Time: 18:03:29 Date: 09/30/08 [ 11.371762] NET: Registered protocol family 16 [ 11.371929] EISA bus registered [ 11.371956] ACPI: bus type pci registered [ 11.372406] PCI: PCI BIOS revision 2.10 entry at 0xfd911, last bus=7 [ 11.372409] PCI: Using configuration type 1 [ 11.372410] Setting up standard PCI resources [ 11.378268] ACPI: EC: Look up EC in DSDT [ 11.379695] ACPI: Interpreter enabled [ 11.379698] ACPI: (supports S0 S3 S4 S5) [ 11.379709] ACPI: Using IOAPIC for interrupt routing [ 11.389801] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 11.389804] ACPI: EC: driver started in poll mode [ 11.389886] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 11.390467] Force enabled HPET at base address 0xfed00000 [ 11.390472] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 11.390477] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 11.391268] PCI: Transparent bridge - 0000:00:1e.0 [ 11.391340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 11.391594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 11.391714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 11.397436] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) [ 11.397512] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 11.397587] ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5 [ 11.397662] ACPI: PCI Interrupt Link [LNKD] (IRQs *10) [ 11.397736] ACPI: PCI Interrupt Link [LNKE] (IRQs *10) [ 11.397810] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *3 [ 11.397884] ACPI: PCI Interrupt Link [LNKG] (IRQs *10) [ 11.397958] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 11.398060] Linux Plug and Play Support v0.97 (c) Adam Belay [ 11.398087] pnp: PnP ACPI init [ 11.398093] ACPI: bus type pnp registered [ 11.399187] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 11.399669] pnp: PnP ACPI: found 10 devices [ 11.399671] ACPI: ACPI bus type pnp unregistered [ 11.399674] PnPBIOS: Disabled by ACPI PNP [ 11.399834] PCI: Using ACPI for IRQ routing [ 11.399836] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 11.430944] NET: Registered protocol family 8 [ 11.430946] NET: Registered protocol family 20 [ 11.431089] hpet clockevent registered [ 11.431095] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 11.431099] hpet0: 3 64-bit timers, 14318180 Hz [ 11.434931] Time: tsc clocksource has been installed. [ 11.442948] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 11.442951] system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved [ 11.442954] system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved [ 11.442957] system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved [ 11.442960] system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved [ 11.442963] system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 11.442969] system 00:05: ioport range 0x680-0x68f has been reserved [ 11.442972] system 00:05: ioport range 0x800-0x80f has been reserved [ 11.442974] system 00:05: ioport range 0x1000-0x107f has been reserved [ 11.442977] system 00:05: ioport range 0x1180-0x11bf has been reserved [ 11.442979] system 00:05: ioport range 0xfe00-0xfe01 has been reserved [ 11.442982] system 00:05: iomem range 0xd000c000-0xd000ffff has been reserved [ 11.473310] PCI: Bridge: 0000:00:01.0 [ 11.473311] IO window: disabled. [ 11.473315] MEM window: 90000000-afffffff [ 11.473317] PREFETCH window: c0000000-cfffffff [ 11.473328] PCI: Bus 7, cardbus bridge: 0000:06:05.0 [ 11.473330] IO window: 00002400-000024ff [ 11.473335] IO window: 00002800-000028ff [ 11.473340] PREFETCH window: 50000000-53ffffff [ 11.473346] MEM window: 54000000-57ffffff [ 11.473351] PCI: Bridge: 0000:00:1e.0 [ 11.473354] IO window: 2000-2fff [ 11.473359] MEM window: b0000000-b00fffff [ 11.473363] PREFETCH window: disabled. [ 11.473378] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.473383] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.473395] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 11.473415] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 17 [ 11.473428] NET: Registered protocol family 2 [ 11.510858] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 11.511057] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 11.511741] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 11.512111] TCP: Hash tables configured (established 131072 bind 65536) [ 11.512114] TCP reno registered [ 11.522924] checking if image is initramfs... it is [ 11.934113] Switched to high resolution mode on CPU 0 [ 12.196155] Freeing initrd memory: 7698k freed [ 12.196356] Simple Boot Flag at 0x36 set to 0x1 [ 12.196722] audit: initializing netlink socket (disabled) [ 12.196738] audit(1222797809.316:1): initialized [ 12.196903] highmem bounce pool size: 64 pages [ 12.198590] VFS: Disk quotas dquot_6.5.1 [ 12.198660] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.198805] AppArmor: Unable to register AppArmor [ 12.198889] io scheduler noop registered [ 12.198891] io scheduler anticipatory registered [ 12.198893] io scheduler deadline registered [ 12.198904] io scheduler cfq registered (default) [ 12.198998] Boot video device is 0000:01:00.0 [ 12.199007] PCI: Firmware left 0000:06:08.0 e100 interrupts enabled, disabling [ 12.199116] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 12.199144] assign_interrupt_mode Found MSI capability [ 12.199169] Allocate Port Service[0000:00:01.0:pcie00] [ 12.199373] isapnp: Scanning for PnP cards... [ 12.553857] isapnp: No Plug & Play device found [ 12.577623] Real Time Clock Driver v1.12ac [ 12.577719] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.578771] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 12.578834] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 12.578917] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 12.581290] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.581294] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 12.585066] mice: PS/2 mouse device common for all mice [ 12.585163] EISA: Probing bus 0 at eisa.0 [ 12.585170] Cannot allocate resource for EISA slot 1 [ 12.585172] Cannot allocate resource for EISA slot 2 [ 12.585198] EISA: Detected 0 cards. [ 12.585201] cpuidle: using governor ladder [ 12.585203] cpuidle: using governor menu [ 12.585282] TCP cubic registered [ 12.585289] NET: Registered protocol family 1 [ 12.585314] Using IPI No-Shortcut mode [ 12.585434] Magic number: 8:695:90 [ 12.585690] Freeing unused kernel memory: 364k freed [ 12.620874] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 13.768073] fuse init (API version 7.9) [ 13.777238] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 13.777243] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.777255] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 13.779066] ACPI: Thermal Zone [ATF0] (56 C) [ 14.341215] usbcore: registered new interface driver usbfs [ 14.341237] usbcore: registered new interface driver hub [ 14.349078] usbcore: registered new device driver usb [ 14.360326] USB Universal Host Controller Interface driver v3.0 [ 14.360384] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 14.360395] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 14.360399] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.360719] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 14.360750] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001800 [ 14.360872] usb usb1: configuration #1 chosen from 1 choice [ 14.360894] hub 1-0:1.0: USB hub found [ 14.360899] hub 1-0:1.0: 2 ports detected [ 14.421919] SCSI subsystem initialized [ 14.461739] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 14.461752] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.461756] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.461778] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 14.461810] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 14.461913] usb usb2: configuration #1 chosen from 1 choice [ 14.461934] hub 2-0:1.0: USB hub found [ 14.461939] hub 2-0:1.0: 2 ports detected [ 14.488591] libata version 3.00 loaded. [ 14.514068] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 14.514072] e100: Copyright(c) 1999-2006 Intel Corporation [ 14.565561] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 17 [ 14.565575] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.565580] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.565605] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 14.565637] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001840 [ 14.565737] usb usb3: configuration #1 chosen from 1 choice [ 14.565758] hub 3-0:1.0: USB hub found [ 14.565763] hub 3-0:1.0: 2 ports detected [ 14.669369] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 17 (level, low) -> IRQ 18 [ 14.669382] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 14.669386] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 14.669407] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 14.669433] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00001860 [ 14.669533] usb usb4: configuration #1 chosen from 1 choice [ 14.669554] hub 4-0:1.0: USB hub found [ 14.669559] hub 4-0:1.0: 2 ports detected [ 14.773314] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 [ 14.773328] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 14.773332] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 14.773353] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 14.777249] ehci_hcd 0000:00:1d.7: debug port 1 [ 14.777255] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 14.777265] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x80004000 [ 14.805049] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 14.817023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.817137] usb usb5: configuration #1 chosen from 1 choice [ 14.817159] hub 5-0:1.0: USB hub found [ 14.817165] hub 5-0:1.0: 8 ports detected [ 14.921157] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 14.948972] e100: eth0: e100_probe: addr 0xb0006000, irq 21, MAC addr 00:13:a9:05:cb:f9 [ 14.948984] ata_piix 0000:00:1f.1: version 2.12 [ 14.948999] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 18 (level, low) -> IRQ 22 [ 14.949028] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 14.952794] scsi0 : ata_piix [ 14.953172] scsi1 : ata_piix [ 14.953605] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 14.953608] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 15.272796] ata1.00: ATAPI: MATSHITAUJ-842D, 1.00, max UDMA/33 [ 15.423955] Clocksource tsc unstable (delta = -33865048618 ns) [ 15.427956] Time: hpet clocksource has been installed. [ 15.429480] ata1.00: configured for UDMA/33 [ 15.429523] ata2: port disabled. ignoring. [ 15.429924] scsi 0:0:0:0: CD-ROM MATSHITA UJ-842D 1.00 PQ: 0 ANSI: 5 [ 15.429986] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 15.431219] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 15.434857] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 22 [ 15.434890] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 15.434928] scsi2 : ata_piix [ 15.435052] scsi3 : ata_piix [ 15.435758] ata3: SATA max UDMA/133 cmd 0x18c0 ctl 0x18b8 bmdma 0x18a0 irq 22 [ 15.435761] ata4: SATA max UDMA/133 cmd 0x18b0 ctl 0x1894 bmdma 0x18a8 irq 22 [ 15.446982] usb 2-1: configuration #1 chosen from 1 choice [ 15.474865] usbcore: registered new interface driver hiddev [ 15.477320] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2 [ 15.478834] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 15.480341] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.1/input/input3 [ 15.481455] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 15.481466] usbcore: registered new interface driver usbhid [ 15.481469] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 15.489737] ata3.00: ATA-7: HTS541010G9SA00, MBZOC60D, max UDMA/100 [ 15.489741] ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (not used) [ 15.505078] ata3.00: configured for UDMA/100 [ 15.520959] scsi 2:0:0:0: Direct-Access ATA HTS541010G9SA00 MBZO PQ: 0 ANSI: 5 [ 15.522000] ACPI: PCI Interrupt 0000:06:05.2[C] -> GSI 20 (level, low) -> IRQ 21 [ 15.571704] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[b0004000-b00047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 15.598427] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 15.598431] Uniform CD-ROM driver Revision: 3.20 [ 15.598470] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 15.601929] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 15.601947] sd 2:0:0:0: [sda] Write Protect is off [ 15.601950] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.601965] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.602004] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 15.602013] sd 2:0:0:0: [sda] Write Protect is off [ 15.602016] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.602030] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.602033] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 15.602540] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 15.633222] sda1 sda2 < sda5 > [ 15.634016] sd 2:0:0:0: [sda] Attached SCSI disk [ 15.691920] Attempting manual resume [ 15.691924] swsusp: Resume From Partition 8:5 [ 15.691925] PM: Checking swsusp image. [ 15.692043] PM: Resume from disk failed. [ 15.707673] kjournald starting. Commit interval 5 seconds [ 15.707681] EXT3-fs: mounted filesystem with ordered data mode. [ 15.760837] ieee1394: Host added: ID:BUS[0-00:1023] GUID[08004603020cf403] [ 18.058765] iTCO_vendor_support: vendor-support=0 [ 18.102687] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 18.102763] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 18.102773] iTCO_wdt: No card detected [ 18.170635] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 18.233389] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 18.286803] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.350246] Linux agpgart interface v0.102 [ 18.477463] intel_rng: FWH not detected [ 18.683794] input: Lid Switch as /devices/virtual/input/input5 [ 18.684196] ACPI: Lid Switch [LID0] [ 18.684255] input: Power Button (CM) as /devices/virtual/input/input6 [ 18.693632] ACPI: Power Button (CM) [PWRB] [ 18.817949] Yenta: CardBus bridge found at 0000:06:05.0 [104d:818f] [ 18.817973] Yenta: Enabling burst memory read transactions [ 18.817979] Yenta: Using CSCINT to route CSC interrupts to PCI [ 18.817981] Yenta: Routing CardBus interrupts to PCI [ 18.817987] Yenta TI: socket 0000:06:05.0, mfunc 0x01001b22, devctl 0x64 [ 18.840820] ieee80211_crypt: registered algorithm 'NULL' [ 18.843577] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 18.843580] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> [ 19.049764] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 [ 19.049769] Socket status: 30000006 [ 19.049772] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 19.049777] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 19.049780] cs: IO port probe 0x2000-0x2fff: clean. [ 19.049999] pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb00fffff [ 19.133234] ACPI: PCI Interrupt 0000:06:05.3[B] -> GSI 23 (level, low) -> IRQ 20 [ 19.156798] tifm_core: MMC/SD card detected in socket 0:0 [ 19.219611] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 19.219615] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 19.219717] ACPI: PCI Interrupt 0000:06:0b.0[A] -> GSI 22 (level, low) -> IRQ 23 [ 19.274744] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 19.446609] input: PS/2 Mouse as /devices/virtual/input/input7 [ 19.487150] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 [ 19.600404] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input9 [ 19.624011] ACPI: Video Device [NGFX] (multi-head: yes rom: no post: no) [ 19.624512] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10 [ 19.647959] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [ 20.143119] sony-laptop: Sony Programmable IO Control Driver v0.5. [ 20.143127] sony-laptop: detected Type3 model [ 20.181370] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:18/SNY6001:00/input/input11 [ 20.207086] input: Sony Vaio Jogdial as /devices/virtual/input/input12 [ 20.226939] sony-laptop: device allocated minor is 63 [ 20.231165] sony-laptop: Sony Notebook Control Driver v0.5. [ 20.378695] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 20.378719] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 20.762025] ACPI: AC Adapter [ACAD] (on-line) [ 20.814589] ACPI: Battery Slot [BAT1] (battery present) [ 21.943507] ipw2200: Radio Frequency Kill Switch is On: [ 21.943510] Kill switch must be turned off for wireless networking to work. [ 22.071313] cs: IO port probe 0x100-0x3af: clean. [ 22.073273] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 22.074088] cs: IO port probe 0x820-0x8ff: clean. [ 22.074760] cs: IO port probe 0xc00-0xcf7: clean. [ 22.075592] cs: IO port probe 0xa00-0xaff: clean. [ 22.244545] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 22.270326] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 22.393101] loop: module loaded [ 22.451757] lp: driver loaded but no devices found [ 22.622593] NET: Registered protocol family 10 [ 22.622794] lo: Disabled Privacy Extensions [ 22.653171] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k [ 22.741795] EXT3 FS on sda1, internal journal [ 22.788734] device-mapper: uevent: version 1.0.3 [ 22.788760] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] [ 23.012347] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.208168] No dock devices found. [ 23.229457] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 23.977198] ppdev: user-space parallel port driver [ 24.175224] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 24.175464] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers [ 24.175710] sonypi: ioport 0x1080 busy, using sony-laptop? if not use check_ioport=0 [ 24.175714] sonypi: failed to request ioports [ 24.175928] sonypi: probe of sonypi failed with error -16 [ 57.917070] Marking TSC unstable due to: cpufreq changes. [ 44.075640] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 44.166897] Bluetooth: Core ver 2.11 [ 44.166981] NET: Registered protocol family 31 [ 44.166984] Bluetooth: HCI device and connection manager initialized [ 44.166990] Bluetooth: HCI socket layer initialized [ 58.945491] Bluetooth: L2CAP ver 2.9 [ 58.945499] Bluetooth: L2CAP socket layer initialized [ 25.276968] Bluetooth: RFCOMM socket layer initialized [ 25.276980] Bluetooth: RFCOMM TTY layer initialized [ 25.276982] Bluetooth: RFCOMM ver 1.8 [ 59.505889] eth0: no IPv6 routers present -- Computer hangs up (freeze) and reports SATA errors during disk checking after reboot https://bugs.launchpad.net/bugs/217920 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
