Public bug reported:
8.10 beta CD - normal x86_64 install CD
The CD boots, and the text-mode installer runs. After the detecting
network cards stage, the next stage (loading modules?) goes through its
progress bar and seems to complete. The next screen is blank, and I have
a line at the bottom of the screen that appears to do nothing. If I hit
enter, it puts a carriage return there. Either I am impatient and this
is an extremely slow progress bar (unlikely) or it's just hanging there.
If I hit "control-C" at that screen, I see the "Detecting Network Cards"
(or whatever that exact text say) come up, but it's hung.
I have 1 hard drive on a sata port right now - a 1.0 TB Seagate
Barracuda drive.
Hardware: ASUS P5Q Deluxe motherboard - which has Intel P45 northbridge,
Intel ICH10R southbridge, an additional Marvell 88SE6121 controller (no
drives attached to that on my machine), Marvell 88E8056 / 88E8001
Gigabit LAN, 1394: LSI L-FW3227
The output of lspci on 8.04 is as follows:
00:00.0 Host bridge: Intel Corporation Eaglelake DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Eaglelake PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI
Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI
Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI
Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0640 (rev
a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E
Gigabit Ethernet Controller (rev 12)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II
Controller (rev b1)
05:02.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit
Ethernet Controller (rev 14)
05:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
I was expecting the installer to bring up some kind of options and allow me to
continue the installation. It sat there and did nothing.
** Affects: ubuntu
Importance: Undecided
Status: New
** Tags: beta installer
--
Installer sits there, does nothing
https://bugs.launchpad.net/bugs/278236
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
