I figured out what the problem was/is. It seems that the hardware and
software does not quite agree with one another. The radio can be
physically turned on, but not recognized, and vice-versa.

Here is the output from dmesg that pertains to the card:

[  286.381451] b43-phy0: Broadcom 4318 WLAN found
[  286.453427] phy0: Selected rate control algorithm 'pid'
[  286.673598] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[  290.793536] input: b43-phy0 as /class/input/input8
[  290.880108] firmware: requesting b43/ucode5.fw
[  290.946666] firmware: requesting b43/pcm5.fw
[  290.959994] firmware: requesting b43/b0g0initvals5.fw
[  290.999729] firmware: requesting b43/b0g0bsinitvals5.fw
[  291.124146] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  291.254922] Registered led device: b43-phy0::radio
[  291.426283] NET: Registered protocol family 17
[  291.808120] b43-phy0: Radio hardware status changed to DISABLED
[  323.000075] b43-phy0: Radio hardware status changed to ENABLED
[  341.500067] b43-phy0: Radio turned on by software
[  356.000154] b43-phy0: Radio hardware status changed to DISABLED
[  402.653085] input: b43-phy0 as /class/input/input9
[  402.913896] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  403.063047] Registered led device: b43-phy0::radio
[  403.676087] b43-phy0: Radio hardware status changed to DISABLED
[  403.764103] b43-phy0: Radio turned on by software
[  403.764119] b43-phy0: The hardware RF-kill button still turns the radio 
physically off. Press the button to turn it on.
[  421.000061] b43-phy0: Radio hardware status changed to ENABLED
[  443.912548] spurious 8259A interrupt: IRQ7.

I guess it's not really a bug, but without knowing to look at dmesg, I
don't know how anyone would know the right sequence of button presses to
get the card enabled! As you may notice, even with the help of dmesg it
took me several tries to get it working.

Thank you very much for your help, I hope this was not a waste of your
time.

-- 
[Intrepid Beta] Card does not seem to work with b43
https://bugs.launchpad.net/bugs/277716
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to