Folks,
I have the same issue with a Nikon D40 camera loaded with a 4GB SDHC card on
ubuntu 8.04 (i386) and 8.10(amd 64bit). The mount works fine with Ubuntu 7.04
as well as Knoppix 5.1.1 (all i386-versions). The mount also works with a 2GB
SD card on 8.04,
I thought it might be an adress pointer problem on the 32-bit i386
version and booted the 64-bit version of Ubuntu 8.10. I had the same
issues.
Any hints or workarounds?
Here is my output from /var/log/messages:
Oct 14 22:59:50 calzone kernel: [ 1054.174655] scsi8 : SCSI emulation for USB
Mass Storage devices
Oct 14 22:59:55 calzone kernel: [ 1059.175927] scsi 8:0:0:0: Direct-Access
NIKON D40 1.00 PQ: 0 ANSI: 2
Oct 14 22:59:55 calzone kernel: [ 1059.177402] sd 8:0:0:0: [sdc] 7959553
512-byte hardware sectors (4075 MB)
Oct 14 22:59:55 calzone kernel: [ 1059.177898] sd 8:0:0:0: [sdc] Write Protect
is off
Oct 14 22:59:55 calzone kernel: [ 1059.179895] sd 8:0:0:0: [sdc] 7959553
512-byte hardware sectors (4075 MB)
Oct 14 22:59:55 calzone kernel: [ 1059.180394] sd 8:0:0:0: [sdc] Write Protect
is off
Oct 14 22:59:55 calzone kernel: [ 1059.180404] sdc: sdc1
Oct 14 22:59:55 calzone kernel: [ 1059.182795] sd 8:0:0:0: [sdc] Attached SCSI
removable disk
Oct 14 22:59:55 calzone kernel: [ 1059.182925] sd 8:0:0:0: Attached scsi
generic sg3 type 0
Oct 14 22:59:55 calzone kernel: [ 1059.257525] end_request: I/O error, dev sdc,
sector 7959552
Oct 14 22:59:55 calzone kernel: [ 1059.258644] end_request: I/O error, dev sdc,
sector 7959552
Oct 14 22:59:55 calzone kernel: [ 1059.262635] end_request: I/O error, dev sdc,
sector 7959552
Oct 14 22:59:55 calzone kernel: [ 1059.263770] end_request: I/O error, dev sdc,
sector 7959552
Oct 14 22:59:55 calzone kernel: [ 1059.264884] end_request: I/O error, dev sdc,
sector 7959552
Oct 14 22:59:55 calzone kernel: [ 1059.274866] end_request: I/O error, dev sdc,
sector 7959552
Oct 14 22:59:55 calzone kernel: [ 1059.275993] end_request: I/O error, dev sdc,
sector 7959552
Oct 14 22:59:55 calzone kernel: [ 1059.277238] end_request: I/O error, dev sdc,
sector 96
Oct 14 22:59:55 calzone kernel: [ 1059.278373] end_request: I/O error, dev sdc,
sector 97
Oct 14 22:59:55 calzone kernel: [ 1059.279614] end_request: I/O error, dev sdc,
sector 96
Oct 14 22:59:55 calzone kernel: [ 1059.280744] end_request: I/O error, dev sdc,
sector 97
Oct 14 22:59:55 calzone kernel: [ 1059.299715] end_request: I/O error, dev sdc,
sector 8192
Oct 14 22:59:55 calzone kernel: [ 1059.300825] end_request: I/O error, dev sdc,
sector 8192
Oct 14 22:59:55 calzone kernel: [ 1059.301954] end_request: I/O error, dev sdc,
sector 0
Oct 14 22:59:55 calzone kernel: [ 1059.303081] end_request: I/O error, dev sdc,
sector 0
Oct 14 22:59:55 calzone kernel: [ 1059.304198] end_request: I/O error, dev sdc,
sector 0
Oct 14 22:59:55 calzone kernel: [ 1059.305318] end_request: I/O error, dev sdc,
sector 1
Oct 14 22:59:55 calzone kernel: [ 1059.312441] end_request: I/O error, dev sdc,
sector 8192
Oct 14 22:59:55 calzone kernel: [ 1059.313561] end_request: I/O error, dev sdc,
sector 8192
Oct 14 22:59:55 calzone kernel: [ 1059.315180] end_request: I/O error, dev sdc,
sector 0
Oct 14 22:59:55 calzone kernel: [ 1059.316304] end_request: I/O error, dev sdc,
sector 1
Oct 14 22:59:55 calzone kernel: [ 1059.317549] end_request: I/O error, dev sdc,
sector 0
Oct 14 22:59:55 calzone kernel: [ 1059.319683] end_request: I/O error, dev sdc,
sector 1
Oct 14 22:59:55 calzone kernel: [ 1059.321042] end_request: I/O error, dev sdc,
sector 0
Oct 14 22:59:55 calzone kernel: [ 1059.322173] end_request: I/O error, dev sdc,
sector 1
Oct 14 22:59:58 calzone kernel: [ 1061.737350] end_request: I/O error, dev sdc,
sector 0
Oct 14 22:59:58 calzone kernel: [ 1061.738476] end_request: I/O error, dev sdc,
sector 0
Oct 14 22:59:58 calzone kernel: [ 1061.739720] end_request: I/O error, dev sdc,
sector 0
Oct 14 22:59:58 calzone kernel: [ 1061.740846] end_request: I/O error, dev sdc,
sector 1
Oct 14 23:02:27 calzone kernel: [ 1211.192988] usb 8-5: USB disconnect, address
5
# lsusb -v -D /proc/bus/usb/008/001
Device: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.24-19-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0503 highspeed power enable connect
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
# lsusb -v -D /proc/bus/usb/008/006
Device: ID 04b0:0413 Nikon Corp. D40 (mass storage mode)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04b0 Nikon Corp.
idProduct 0x0413 D40 (mass storage mode)
bcdDevice 1.00
iManufacturer 1 NIKON
iProduct 2 NIKON DSC D40
iSerial 3 6073492
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
--
I can't mount my stick datatraveler reader 2gb of kingston
https://bugs.launchpad.net/bugs/177024
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
