Still no joy: [EMAIL PROTECTED]:~$ cat /sys/module/ohci1394/parameters/phys_dma 1 [EMAIL PROTECTED]:~$ modprobe -r sbp2 FATAL: Error removing sbp2 (/lib/modules/2.6.27-7-generic/kernel/drivers/ieee1394/sbp2.ko): Operation not permitted [EMAIL PROTECTED]:~$ sudo modprobe -r sbp2 [sudo] password for kevin: [EMAIL PROTECTED]:~$ sudo modprobe sbp2 [EMAIL PROTECTED]:~$ dmesg | tail -33 [89211.484502] [drm] Allocating FIFO number 0 [89211.487807] [drm] nouveau_fifo_alloc: initialised FIFO 0 [89211.488885] [drm] Allocating FIFO number 1 [89211.491986] [drm] nouveau_fifo_alloc: initialised FIFO 1 [89249.397194] wlan0: authenticate with AP 00:0c:41:cb:39:69 [89249.402720] wlan0: authenticated [89249.402733] wlan0: associate with AP 00:0c:41:cb:39:69 [89249.405473] wlan0: RX ReassocResp from 00:0c:41:cb:39:69 (capab=0x411 status=0 aid=1) [89249.405484] wlan0: associated [89312.695429] type=1503 audit(1225161367.804:16): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/29095/net/" pid=29095 profile="/usr/sbin/cupsd" [89313.763396] type=1503 audit(1225161368.872:17): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/29106/net/" pid=29106 profile="/usr/sbin/cupsd" [89313.767677] type=1503 audit(1225161368.876:18): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.771102] type=1503 audit(1225161368.880:19): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.774670] type=1503 audit(1225161368.884:20): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.778060] type=1503 audit(1225161368.888:21): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.781422] type=1503 audit(1225161368.892:22): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.785150] type=1503 audit(1225161368.896:23): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.788631] type=1503 audit(1225161368.896:24): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [92790.164839] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [174249.212460] ieee1394: Node added: ID:BUS[0-00:1023] GUID[0090a991e0014032] [174249.212583] ieee1394: Node changed: 0-00:1023 -> 0-01:1023 [174249.219850] scsi5 : SBP-2 IEEE-1394 [174270.220040] ieee1394: sbp2: Error logging into SBP-2 device - timed out [174270.220310] sbp2: probe of 0090a991e0014032-1 failed with error -16 [174270.220510] scsi6 : SBP-2 IEEE-1394 [174291.225023] ieee1394: sbp2: Error logging into SBP-2 device - timed out [174291.227611] sbp2: probe of 0090a991e0014032-1 failed with error -16 [174291.499125] scsi7 : SBP-2 IEEE-1394 [174312.501023] ieee1394: sbp2: Error logging into SBP-2 device - timed out [174312.504597] sbp2: probe of 0090a991e0014032-1 failed with error -16 [174502.519632] scsi8 : SBP-2 IEEE-1394 [174523.520029] ieee1394: sbp2: Error logging into SBP-2 device - timed out [174523.521863] sbp2: probe of 0090a991e0014032-1 failed with error -16 [EMAIL PROTECTED]:~$ sudo modprobe -r ohci1394 [EMAIL PROTECTED]:~$ sudo modprobe ohci1394 [EMAIL PROTECTED]:~$ dmesg | tail -33 [89249.405473] wlan0: RX ReassocResp from 00:0c:41:cb:39:69 (capab=0x411 status=0 aid=1) [89249.405484] wlan0: associated [89312.695429] type=1503 audit(1225161367.804:16): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/29095/net/" pid=29095 profile="/usr/sbin/cupsd" [89313.763396] type=1503 audit(1225161368.872:17): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/29106/net/" pid=29106 profile="/usr/sbin/cupsd" [89313.767677] type=1503 audit(1225161368.876:18): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.771102] type=1503 audit(1225161368.880:19): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.774670] type=1503 audit(1225161368.884:20): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.778060] type=1503 audit(1225161368.888:21): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.781422] type=1503 audit(1225161368.892:22): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.785150] type=1503 audit(1225161368.896:23): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [89313.788631] type=1503 audit(1225161368.896:24): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=29106 profile="/usr/sbin/cupsd" [92790.164839] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [174249.212460] ieee1394: Node added: ID:BUS[0-00:1023] GUID[0090a991e0014032] [174249.212583] ieee1394: Node changed: 0-00:1023 -> 0-01:1023 [174249.219850] scsi5 : SBP-2 IEEE-1394 [174270.220040] ieee1394: sbp2: Error logging into SBP-2 device - timed out [174270.220310] sbp2: probe of 0090a991e0014032-1 failed with error -16 [174270.220510] scsi6 : SBP-2 IEEE-1394 [174291.225023] ieee1394: sbp2: Error logging into SBP-2 device - timed out [174291.227611] sbp2: probe of 0090a991e0014032-1 failed with error -16 [174291.499125] scsi7 : SBP-2 IEEE-1394 [174312.501023] ieee1394: sbp2: Error logging into SBP-2 device - timed out [174312.504597] sbp2: probe of 0090a991e0014032-1 failed with error -16 [174502.519632] scsi8 : SBP-2 IEEE-1394 [174523.520029] ieee1394: sbp2: Error logging into SBP-2 device - timed out [174523.521863] sbp2: probe of 0090a991e0014032-1 failed with error -16 [174559.676589] ieee1394: Node removed: ID:BUS[0-01:1023] GUID[0011d8000135db81] [174559.676764] ieee1394: Node removed: ID:BUS[0-00:1023] GUID[0090a991e0014032] [174570.727104] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fdbff000-fdbff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [174572.005351] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... [174572.278718] ieee1394: Node added: ID:BUS[0-00:1023] GUID[0090a991e0014032] [174572.278934] ieee1394: Host added: ID:BUS[0-01:1023] GUID[0011d8000135db81] [174572.287612] scsi9 : SBP-2 IEEE-1394
... but no drive is mounted (do I need to mount it manually?). Model number is WD5000D032; specs at http://wdc.custhelp.com/cgi- bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1416 imply FireWire 400. No eSATA connector. Internal config unknown. -- External ieee1394 drive not recognized 2.6.27-5 https://bugs.launchpad.net/bugs/279342 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
