** Description changed: - the screen brightness doesn't work with the FN-Key of the noteboke + the screen brightness doesn't work with the FN-Keys of the notebook Samsung R70 T7300 Despina with ubuntu 8.04 beta. + + dmesg: + + [ 385.374091] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). + [ 385.374109] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known. + [ 385.609502] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). + [ 385.609525] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known. + [ 385.798838] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). + [ 385.798852] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known. + [ 386.090549] atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0). + [ 386.090571] atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known. + [ 386.320837] atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0). + [ 386.320860] atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known. + [ 386.515299] atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0). + [ 386.515321] atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known. + [ 386.750721] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). + [ 386.750745] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known. + [ 387.011706] atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0). + [ 387.011720] atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known. + [ 387.257359] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). + [ 387.257382] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known. + [ 387.513233] atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0). + [ 387.513255] atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known. + + sudo lspci -vvnn: + + ping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Interrupt: pin C routed to IRQ 255 + Region 0: Memory at f0401400 (32-bit, non-prefetchable) [size=256] + Capabilities: [80] Power Management version 2 + Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=2 PME- + Kernel driver in use: ricoh-mmc + Kernel modules: ricoh_mmc + + 05:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 04) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Interrupt: pin C routed to IRQ 255 + Region 0: Memory at f0401800 (32-bit, non-prefetchable) [size=256] + Capabilities: [80] Power Management version 2 + Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=2 PME- + + 05:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff) + !!! Unknown header type 7f + + [EMAIL PROTECTED]:~$ clear + + [EMAIL PROTECTED]:~$ sudo lspci -vvnn + 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- + Latency: 0 + Capabilities: [e0] Vendor Specific Information <?> + Kernel modules: intel-agp + + 00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 03) + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0, Cache Line Size: 64 bytes + Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 + I/O behind bridge: 00002000-00002fff + Memory behind bridge: cc000000-ceffffff + Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff + Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- + BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- + PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- + Capabilities: [88] Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Capabilities: [80] Power Management version 3 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ + Address: fee0300c Data: 41c1 + Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us + ExtTag- RBE+ FLReset- + DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ + RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- + MaxPayload 128 bytes, MaxReadReq 128 bytes + DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- + LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us + ClockPM- Suprise- LLActRep- BwNot- + LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ + ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- + LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- + SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise- + Slot # 1, PowerLimit 75.000000; Interlock- NoCompl+ + SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- + Control: AttnInd Off, PwrInd On, Power- Interlock- + SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- + Changed: MRL- PresDet+ LinkState- + RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- + RootCap: CRSVisible- + RootSta: PME ReqID 0000, PMEStatus- PMEPending- + Capabilities: [100] Virtual Channel <?> + Capabilities: [140] Root Complex Link <?> + Kernel driver in use: pcieport-driver + Kernel modules: shpchp + + 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin A routed to IRQ 16 + Region 4: I/O ports at 1800 [size=32] + Kernel driver in use: uhci_hcd + Kernel modules: uhci-hcd + + 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin B routed to IRQ 21 + Region 4: I/O ports at 1820 [size=32] + Kernel driver in use: uhci_hcd + Kernel modules: uhci-hcd + + 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin C routed to IRQ 18 + Region 0: Memory at f0504000 (32-bit, non-prefetchable) [size=1K] + Capabilities: [50] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [58] Debug port: BAR=1 offset=00a0 + Kernel driver in use: ehci_hcd + Kernel modules: ehci-hcd + + 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0, Cache Line Size: 64 bytes + Interrupt: pin A routed to IRQ 22 + Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=16K] + Capabilities: [50] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- + Address: 0000000000000000 Data: 0000 + Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us + ExtTag- RBE- FLReset- + DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- + RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ + MaxPayload 128 bytes, MaxReadReq 128 bytes + DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- + LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us + ClockPM- Suprise- LLActRep- BwNot- + LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- + ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- + LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- + Capabilities: [100] Virtual Channel <?> + Capabilities: [130] Root Complex Link <?> + Kernel driver in use: HDA Intel + Kernel modules: snd-hda-intel + + 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0, Cache Line Size: 64 bytes + Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 + Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- + BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- + PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- + Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited + ExtTag- RBE+ FLReset- + DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ + RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- + MaxPayload 128 bytes, MaxReadReq 128 bytes + DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- + LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us + ClockPM- Suprise- LLActRep+ BwNot- + LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- + ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- + LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- + SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ + Slot # 2, PowerLimit 6.500000; Interlock- NoCompl- + SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- + Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- + SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- + Changed: MRL- PresDet- LinkState- + RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- + RootCap: CRSVisible- + RootSta: PME ReqID 0000, PMEStatus- PMEPending- + Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ + Address: fee0300c Data: 41c9 + Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Capabilities: [a0] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [100] Virtual Channel <?> + Capabilities: [180] Root Complex Link <?> + Kernel driver in use: pcieport-driver + Kernel modules: shpchp + + 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0, Cache Line Size: 64 bytes + Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 + Memory behind bridge: f0300000-f03fffff + Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR+ <PERR- + BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- + PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- + Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited + ExtTag- RBE+ FLReset- + DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ + RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- + MaxPayload 128 bytes, MaxReadReq 128 bytes + DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- + LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us + ClockPM- Suprise- LLActRep+ BwNot- + LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ + ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- + LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- + SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ + Slot # 3, PowerLimit 6.500000; Interlock- NoCompl- + SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- + Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- + SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- + Changed: MRL- PresDet- LinkState- + RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- + RootCap: CRSVisible- + RootSta: PME ReqID 0000, PMEStatus- PMEPending- + Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ + Address: fee0300c Data: 41d1 + Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Capabilities: [a0] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [100] Virtual Channel <?> + Capabilities: [180] Root Complex Link <?> + Kernel driver in use: pcieport-driver + Kernel modules: shpchp + + 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0, Cache Line Size: 64 bytes + Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 + I/O behind bridge: 00003000-00003fff + Memory behind bridge: f0200000-f02fffff + Prefetchable memory behind bridge: 000000008c000000-000000008c0fffff + Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- + BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- + PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- + Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited + ExtTag- RBE+ FLReset- + DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ + RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- + MaxPayload 128 bytes, MaxReadReq 128 bytes + DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- + LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us + ClockPM- Suprise- LLActRep+ BwNot- + LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ + ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- + LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- + SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ + Slot # 5, PowerLimit 6.500000; Interlock- NoCompl- + SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- + Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- + SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- + Changed: MRL- PresDet- LinkState- + RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- + RootCap: CRSVisible- + RootSta: PME ReqID 0000, PMEStatus- PMEPending- + Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ + Address: fee0300c Data: 41d9 + Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Capabilities: [a0] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [100] Virtual Channel <?> + Capabilities: [180] Root Complex Link <?> + Kernel driver in use: pcieport-driver + Kernel modules: shpchp + + 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin A routed to IRQ 23 + Region 4: I/O ports at 1840 [size=32] + Kernel driver in use: uhci_hcd + Kernel modules: uhci-hcd + + 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin B routed to IRQ 19 + Region 4: I/O ports at 1860 [size=32] + Kernel driver in use: uhci_hcd + Kernel modules: uhci-hcd + + 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin C routed to IRQ 18 + Region 4: I/O ports at 1880 [size=32] + Kernel driver in use: uhci_hcd + Kernel modules: uhci-hcd + + 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin A routed to IRQ 23 + Region 0: Memory at f0504400 (32-bit, non-prefetchable) [size=1K] + Capabilities: [50] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [58] Debug port: BAR=1 offset=00a0 + Kernel driver in use: ehci_hcd + Kernel modules: ehci-hcd + + 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01) + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Bus: primary=00, secondary=05, subordinate=09, sec-latency=32 + I/O behind bridge: 00004000-00004fff + Memory behind bridge: f0400000-f04fffff + Prefetchable memory behind bridge: 0000000088000000-000000008bffffff + Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- + BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- + PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- + Capabilities: [50] Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + + 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Capabilities: [e0] Vendor Specific Information <?> + Kernel modules: iTCO_wdt + + 00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03) (prog-if 80 [Master]) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin B routed to IRQ 19 + Region 0: I/O ports at 01f0 [size=8] + Region 1: I/O ports at 03f4 [size=1] + Region 2: I/O ports at 0170 [size=8] + Region 3: I/O ports at 0374 [size=1] + Region 4: I/O ports at 18e0 [size=16] + Region 5: I/O ports at 18d0 [size=16] + Capabilities: [70] Power Management version 3 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Kernel driver in use: ata_piix + Kernel modules: ata_piix + + 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Interrupt: pin C routed to IRQ 5 + Region 0: Memory at 8c100000 (32-bit, non-prefetchable) [size=256] + Region 4: I/O ports at 1c00 [size=32] + Kernel modules: i2c-i801 + + 01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8600M GS [10de:0425] (rev a1) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin A routed to IRQ 16 + Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M] + Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] + Region 3: Memory at cc000000 (64-bit, non-prefetchable) [size=32M] + Region 5: I/O ports at 2000 [size=128] + Capabilities: [60] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- + Address: 0000000000000000 Data: 0000 + Capabilities: [78] Express (v1) Endpoint, MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us + ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- + DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- + RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ + MaxPayload 128 bytes, MaxReadReq 512 bytes + DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- + LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us + ClockPM- Suprise- LLActRep- BwNot- + LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ + ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- + LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- + Capabilities: [100] Virtual Channel <?> + Capabilities: [128] Power Budgeting <?> + Capabilities: [600] Vendor Specific Information <?> + Kernel driver in use: nvidia + Kernel modules: nvidiafb, nvidia + + 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61) + Subsystem: Intel Corporation Device [8086:1101] + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0, Cache Line Size: 64 bytes + Interrupt: pin A routed to IRQ 218 + Region 0: Memory at f0300000 (64-bit, non-prefetchable) [size=8K] + Capabilities: [c8] Power Management version 3 + Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ + Address: 00000000fee0300c Data: 414a + Capabilities: [e0] Express (v1) Endpoint, MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited + ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- + DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- + RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ + MaxPayload 128 bytes, MaxReadReq 128 bytes + DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- + LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us + ClockPM+ Suprise- LLActRep- BwNot- + LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ + ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- + LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- + Capabilities: [100] Advanced Error Reporting <?> + Capabilities: [140] Device Serial Number 2d-af-6f-ff-ff-e8-13-00 + Kernel driver in use: iwlagn + Kernel modules: iwlagn + + 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 13) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0, Cache Line Size: 64 bytes + Interrupt: pin A routed to IRQ 219 + Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K] + Region 2: I/O ports at 3000 [size=256] + [virtual] Expansion ROM at 8c000000 [disabled] [size=128K] + Capabilities: [48] Power Management version 3 + Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=1 PME- + Capabilities: [50] Vital Product Data <?> + Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ + Address: 00000000fee0300c Data: 413a + Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited + ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- + DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- + RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- + MaxPayload 128 bytes, MaxReadReq 512 bytes + DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- + LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited + ClockPM+ Suprise- LLActRep- BwNot- + LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ + ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- + LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- + Capabilities: [100] Advanced Error Reporting <?> + Kernel driver in use: sky2 + Kernel modules: sky2 + + 05:09.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b4) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 168 + Interrupt: pin A routed to IRQ 16 + Region 0: Memory at f0400000 (32-bit, non-prefetchable) [size=4K] + Bus: primary=05, secondary=06, subordinate=09, sec-latency=176 + Memory window 0: 88000000-8bfff000 (prefetchable) + Memory window 1: 90000000-93fff000 + I/O window 0: 00004000-000040ff + I/O window 1: 00004400-000044ff + BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ + 16-bit legacy interface ports at 0001 + Kernel driver in use: yenta_cardbus + Kernel modules: yenta_socket + + 05:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 18) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 64 + Interrupt: pin C routed to IRQ 18 + Region 0: Memory at f0401000 (32-bit, non-prefetchable) [size=256] + Capabilities: [80] Power Management version 2 + Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=2 PME- + Kernel driver in use: sdhci-pci + Kernel modules: sdhci-pci + + 05:09.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 09) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Interrupt: pin C routed to IRQ 255 + Region 0: Memory at f0401400 (32-bit, non-prefetchable) [size=256] + Capabilities: [80] Power Management version 2 + Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=2 PME- + Kernel driver in use: ricoh-mmc + Kernel modules: ricoh_mmc + + 05:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 04) + Subsystem: Samsung Electronics Co Ltd Device [144d:c031] + Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Interrupt: pin C routed to IRQ 255 + Region 0: Memory at f0401800 (32-bit, non-prefetchable) [size=256] + Capabilities: [80] Power Management version 2 + Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=2 PME- + + 05:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff) + !!! Unknown header type 7f + + + [EMAIL PROTECTED]:~$ cat /proc/version_signature + Ubuntu 2.6.27-7.15-generic
-- Screen brightness doesn't work with Samsung R70 T7300 Despina https://bugs.launchpad.net/bugs/219116 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
