This is what I get from "dmesg" in terminal (sorry - it's so long I can't see
what comes up before 0.664361):
0.664361] pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:07.0 BAR 7
(0x0-0xfff), disabling
[ 0.664365] pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:07.0 BAR 7
(0x0-0xfff), disabling
[ 0.664369] pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:07.0 BAR 7
(0x0-0xfff), disabling
[ 0.664372] pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:07.0 BAR 7
(0x0-0xfff), disabling
[ 0.664376] pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:07.0 BAR 7
(0x0-0xfff), disabling
[ 0.664380] pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:07.0 BAR 7
(0x0-0xfff), disabling
[ 0.664384] pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:07.0 BAR 7
(0x0-0xfff), disabling
[ 0.664388] pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:07.0 BAR 7
(0x0-0xfff), disabling
[ 0.664392] pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:07.0 BAR 7
(0x0-0xfff), disabling
[ 0.664396] pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:07.0 BAR 7
(0x0-0xfff), disabling
[ 0.664483] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0
BAR 8 (0x0-0xfffff), disabling
[ 0.664483] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6
(0x0-0x7ffff), disabling
[ 0.664483] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6
(0x0-0x1ffff), disabling
[ 0.664483] pnp: PnP ACPI: found 10 devices
[ 0.664483] ACPI: ACPI bus type pnp unregistered
[ 0.664483] PCI: Using ACPI for IRQ routing
[ 0.664483] pci 0000:00:04.0: BAR 7: can't allocate resource
[ 0.664483] pci 0000:00:04.0: BAR 8: can't allocate resource
[ 0.664483] pci 0000:00:05.0: BAR 7: can't allocate resource
[ 0.664483] pci 0000:00:05.0: BAR 8: can't allocate resource
[ 0.664483] pci 0000:00:06.0: BAR 7: can't allocate resource
[ 0.664483] pci 0000:00:06.0: BAR 8: can't allocate resource
[ 0.664483] pci 0000:00:07.0: BAR 7: can't allocate resource
[ 0.664483] pci 0000:00:07.0: BAR 8: can't allocate resource
[ 0.680043] NET: Registered protocol family 8
[ 0.680045] NET: Registered protocol family 20
[ 0.684081] NetLabel: Initializing
[ 0.684083] NetLabel: domain hash size = 128
[ 0.684085] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.684105] NetLabel: unlabeled traffic allowed by default
[ 0.685891] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.685894] actual entries 65586
[ 0.686066] AppArmor: AppArmor Filesystem Enabled
[ 0.686103] ACPI: RTC can wake from S4
[ 0.696070] system 00:01: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 0.696074] system 00:01: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.696077] system 00:01: iomem range 0xfee00000-0xfee00fff could not be
reserved
[ 0.696091] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.696096] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.696104] system 00:09: iomem range 0xfff00000-0xffffffff could not be
reserved
[ 0.703091] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.703091] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.703091] pci 0000:00:01.0: MEM window: 0xb0100000-0xb01fffff
[ 0.703091] pci 0000:00:01.0: PREFETCH window:
0x000000c0000000-0x000000cfffffff
[ 0.703091] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.703091] pci 0000:00:04.0: IO window: disabled
[ 0.703091] pci 0000:00:04.0: MEM window: disabled
[ 0.703091] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.703091] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
[ 0.703091] pci 0000:00:05.0: IO window: disabled
[ 0.703091] pci 0000:00:05.0: MEM window: disabled
[ 0.703091] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.703091] pci 0000:00:06.0: PCI bridge, secondary bus 0000:06
[ 0.703091] pci 0000:00:06.0: IO window: disabled
[ 0.703091] pci 0000:00:06.0: MEM window: disabled
[ 0.703091] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.703091] pci 0000:00:07.0: PCI bridge, secondary bus 0000:07
[ 0.703091] pci 0000:00:07.0: IO window: disabled
[ 0.703091] pci 0000:00:07.0: MEM window: disabled
[ 0.703091] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.703091] pci 0000:08:01.0: CardBus bridge, secondary bus 0000:09
[ 0.703091] pci 0000:08:01.0: IO window: 0x00a400-0x00a4ff
[ 0.703091] pci 0000:08:01.0: IO window: 0x00a800-0x00a8ff
[ 0.703091] pci 0000:08:01.0: PREFETCH window: 0x50000000-0x53ffffff
[ 0.703091] pci 0000:08:01.0: MEM window: 0x58000000-0x5bffffff
[ 0.703091] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
[ 0.703091] pci 0000:00:14.4: IO window: 0xa000-0xafff
[ 0.703091] pci 0000:00:14.4: MEM window: 0xb0200000-0xb02fffff
[ 0.703091] pci 0000:00:14.4: PREFETCH window:
0x00000050000000-0x00000053ffffff
[ 0.703091] pci 0000:00:04.0: setting latency timer to 64
[ 0.703091] pci 0000:00:05.0: setting latency timer to 64
[ 0.703091] pci 0000:00:06.0: setting latency timer to 64
[ 0.703091] pci 0000:00:07.0: setting latency timer to 64
[ 0.703091] pci 0000:08:01.0: enabling device (0004 -> 0007)
[ 0.703091] pci 0000:08:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.703091] bus: 00 index 0 io port: [0, ffff]
[ 0.703091] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.703091] bus: 01 index 0 io port: [9000, 9fff]
[ 0.703091] bus: 01 index 1 mmio: [b0100000, b01fffff]
[ 0.703091] bus: 01 index 2 mmio: [c0000000, cfffffff]
[ 0.703091] bus: 01 index 3 mmio: [0, 0]
[ 0.703091] bus: 02 index 0 mmio: [0, fff]
[ 0.703091] bus: 02 index 1 mmio: [0, fffff]
[ 0.703091] bus: 02 index 2 mmio: [0, 0]
[ 0.703091] bus: 02 index 3 mmio: [0, 0]
[ 0.703091] bus: 03 index 0 mmio: [0, fff]
[ 0.703091] bus: 03 index 1 mmio: [0, fffff]
[ 0.703091] bus: 03 index 2 mmio: [0, 0]
[ 0.703091] bus: 03 index 3 mmio: [0, 0]
[ 0.703091] bus: 06 index 0 mmio: [0, fff]
[ 0.703091] bus: 06 index 1 mmio: [0, fffff]
[ 0.703091] bus: 06 index 2 mmio: [0, 0]
[ 0.703091] bus: 06 index 3 mmio: [0, 0]
[ 0.703091] bus: 07 index 0 mmio: [0, fff]
[ 0.703091] bus: 07 index 1 mmio: [0, fffff]
[ 0.703091] bus: 07 index 2 mmio: [0, 0]
[ 0.703091] bus: 07 index 3 mmio: [0, 0]
[ 0.703091] bus: 08 index 0 io port: [a000, afff]
[ 0.703091] bus: 08 index 1 mmio: [b0200000, b02fffff]
[ 0.703091] bus: 08 index 2 mmio: [50000000, 53ffffff]
[ 0.703091] bus: 08 index 3 io port: [0, ffff]
[ 0.703091] bus: 08 index 4 mmio: [0, ffffffffffffffff]
[ 0.703091] bus: 09 index 0 io port: [a400, a4ff]
[ 0.703091] bus: 09 index 1 io port: [a800, a8ff]
[ 0.703091] bus: 09 index 2 mmio: [50000000, 53ffffff]
[ 0.703091] bus: 09 index 3 mmio: [58000000, 5bffffff]
[ 0.703091] NET: Registered protocol family 2
[ 0.708062] Switched to high resolution mode on CPU 0
[ 0.708095] Switched to high resolution mode on CPU 1
[ 0.741146] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.741867] TCP established hash table entries: 131072 (order: 9, 2097152
bytes)
[ 0.743706] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.744536] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.744540] TCP reno registered
[ 0.753162] NET: Registered protocol family 1
[ 0.753328] checking if image is initramfs... it is
[ 1.666364] Freeing initrd memory: 8384k freed
[ 1.673361] Simple Boot Flag at 0x36 set to 0x1
[ 1.675007] audit: initializing netlink socket (disabled)
[ 1.675024] type=2000 audit(1226104906.672:1): initialized
[ 1.682379] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.686583] VFS: Disk quotas dquot_6.5.1
[ 1.686726] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.686894] msgmni has been set to 1494
[ 1.687088] io scheduler noop registered
[ 1.687091] io scheduler anticipatory registered
[ 1.687093] io scheduler deadline registered
[ 1.687294] io scheduler cfq registered (default)
[ 1.687306] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 1.687401] pci 0000:01:05.0: Boot video device
[ 1.687577] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.687603] pcieport-driver 0000:00:04.0: found MSI capability
[ 1.687607] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.687689] pci_express 0000:00:04.0:pcie01: allocate port service
[ 1.687763] pci_express 0000:00:04.0:pcie03: allocate port service
[ 1.687869] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 1.687891] pcieport-driver 0000:00:05.0: found MSI capability
[ 1.687894] pci_express 0000:00:05.0:pcie00: allocate port service
[ 1.687977] pci_express 0000:00:05.0:pcie01: allocate port service
[ 1.688136] pci_express 0000:00:05.0:pcie03: allocate port service
[ 1.688242] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.688265] pcieport-driver 0000:00:06.0: found MSI capability
[ 1.688268] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.688344] pci_express 0000:00:06.0:pcie01: allocate port service
[ 1.688417] pci_express 0000:00:06.0:pcie03: allocate port service
[ 1.688524] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 1.688547] pcieport-driver 0000:00:07.0: found MSI capability
[ 1.688550] pci_express 0000:00:07.0:pcie00: allocate port service
[ 1.688626] pci_express 0000:00:07.0:pcie01: allocate port service
[ 1.688706] pci_express 0000:00:07.0:pcie03: allocate port service
[ 1.690426] aer 0000:00:04.0:pcie01: AER service couldn't init device: no
_OSC support
[ 1.691930] aer 0000:00:05.0:pcie01: AER service couldn't init device: no
_OSC support
[ 1.693464] aer 0000:00:06.0:pcie01: AER service couldn't init device: no
_OSC support
[ 1.694982] aer 0000:00:07.0:pcie01: AER service couldn't init device: no
_OSC support
[ 1.754042] Linux agpgart interface v0.103
[ 1.754051] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.757994] brd: module loaded
[ 1.758118] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 1.758319] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64
irq 1,12
[ 1.760779] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.761810] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.761818] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.761821] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.761824] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.761828] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.789276] mice: PS/2 mouse device common for all mice
[ 1.789540] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.789571] rtc0: alarms up to one month
[ 1.789661] cpuidle: using governor ladder
[ 1.789664] cpuidle: using governor menu
[ 1.790164] TCP cubic registered
[ 1.790568] registered taskstats version 1
[ 1.790749] Magic number: 0:759:657
[ 1.790757] block ram10: hash matches
[ 1.790948] rtc_cmos 00:04: setting system clock to 2008-11-08 00:41:48 UTC
(1226104908)
[ 1.790952] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.790954] EDD information not available.
[ 1.791016] Freeing unused kernel memory: 536k freed
[ 1.791371] Write protecting the kernel read-only data: 4348k
[ 1.821676] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 1.971244] fuse init (API version 7.9)
[ 2.121197] ACPI: processor limited to max C-state 1
[ 2.121315] processor ACPI0007:00: registered as cooling_device0
[ 2.121423] processor ACPI0007:01: registered as cooling_device1
[ 2.125806] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.131542] ACPI: Thermal Zone [THRM] (34 C)
[ 2.517576] No dock devices found.
[ 2.558807] usbcore: registered new interface driver usbfs
[ 2.558843] usbcore: registered new interface driver hub
[ 2.566790] usbcore: registered new device driver usb
[ 2.567324] SCSI subsystem initialized
[ 2.570144] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.570163] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.570225] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 1
[ 2.570305] ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0007000
[ 2.588915] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 2.589143] usb usb1: configuration #1 chosen from 1 choice
[ 2.589179] hub 1-0:1.0: USB hub found
[ 2.589191] hub 1-0:1.0: 8 ports detected
[ 2.592203] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 2.592256] libata version 3.00 loaded.
[ 2.661959] 8139too Fast Ethernet driver 0.9.28
[ 2.798073] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 2.798218] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.798236] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.798280] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 2
[ 2.798309] ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0005000
[ 2.853316] usb usb2: configuration #1 chosen from 1 choice
[ 2.853354] hub 2-0:1.0: USB hub found
[ 2.853372] hub 2-0:1.0: 4 ports detected
[ 2.853417] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2.977064] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 3.061412] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.061436] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.061472] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 3
[ 3.061501] ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0006000
[ 3.112088] usb 1-3: configuration #1 chosen from 1 choice
[ 3.117299] usb usb3: configuration #1 chosen from 1 choice
[ 3.117342] hub 3-0:1.0: USB hub found
[ 3.117359] hub 3-0:1.0: 4 ports detected
[ 3.222147] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 3.222204] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 3.222616] b43-pci-bridge 0000:08:04.0: PCI INT A -> GSI 21 (level, low) ->
IRQ 21
[ 3.280142] ssb: Sonics Silicon Backplane found on PCI device 0000:08:04.0
[ 3.280798] sata_sil 0000:00:12.0: version 2.3
[ 3.281048] 8139too 0000:08:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.282354] eth0: RealTek RTL8139 at 0xa000, 00:16:36:90:ba:3c, IRQ 20
[ 3.282357] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 3.285285] scsi0 : sata_sil
[ 3.287620] scsi1 : sata_sil
[ 3.288201] ata1: SATA max UDMA/100 mmio [EMAIL PROTECTED] tf 0xb0004080 irq
22
[ 3.288207] ata2: SATA max UDMA/100 mmio [EMAIL PROTECTED] tf 0xb00040c0 irq
22
[ 3.288544] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.472055] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 3.609090] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.667762] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 3.700185] usb 2-1: configuration #1 chosen from 1 choice
[ 4.005058] usb 2-3: new low speed USB device using ohci_hcd and address 3
[ 4.184055] usb 2-3: device descriptor read/64, error -62
[ 4.468057] usb 2-3: device descriptor read/64, error -62
[ 4.748060] usb 2-3: new low speed USB device using ohci_hcd and address 4
[ 4.928057] usb 2-3: device descriptor read/64, error -62
[ 5.213051] usb 2-3: device descriptor read/64, error -62
[ 5.492055] usb 2-3: new low speed USB device using ohci_hcd and address 5
[ 5.900055] usb 2-3: device not accepting address 5, error -62
[ 6.076050] usb 2-3: new low speed USB device using ohci_hcd and address 6
[ 6.484055] usb 2-3: device not accepting address 6, error -62
[ 6.484068] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6.484175] usbcore: registered new interface driver hiddev
[ 6.497572] input: HID 04d9:1133 as
/devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input2
[ 6.513241] input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1133] on
usb-0000:00:13.0-1
[ 6.513273] usbcore: registered new interface driver usbhid
[ 6.513278] usbhid: v2.6:USB HID core driver
[ 8.929094] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.976135] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 14.249092] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.296167] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 19.569093] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 19.888097] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 19.946681] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 25.208097] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 25.255070] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 30.528093] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 30.575096] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 35.848098] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 35.848567] scsi2 : pata_atiixp
[ 35.849939] scsi3 : pata_atiixp
[ 35.850150] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 35.850153] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 36.382091] ata3.00: ATA-7: WDC WD1200UE-22KVT0, 01.03K01, max UDMA/100
[ 36.382095] ata3.00: 234441648 sectors, multi 16: LBA48
[ 36.382116] ata3.01: ATAPI: MATSHITADVD-RAM UJ-850S, 1.20, max UDMA/33
[ 36.388775] ata3.00: configured for UDMA/100
[ 36.404675] ata3.01: configured for UDMA/33
[ 36.560177] isa bounce pool size: 16 pages
[ 36.560287] scsi 2:0:0:0: Direct-Access ATA WDC WD1200UE-22K 01.0
PQ: 0 ANSI: 5
[ 36.563244] scsi 2:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.20
PQ: 0 ANSI: 5
[ 36.578028] scsi 2:0:0:0: Attached scsi generic sg0 type 0
[ 36.578081] scsi 2:0:1:0: Attached scsi generic sg1 type 5
[ 36.597543] Driver 'sr' needs updating - please use bus_type methods
[ 36.602433] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 36.602440] Uniform CD-ROM driver Revision: 3.20
[ 36.602571] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 36.611647] Driver 'sd' needs updating - please use bus_type methods
[ 36.611831] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 36.611860] sd 2:0:0:0: [sda] Write Protect is off
[ 36.611864] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.611915] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 36.612030] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 36.612056] sd 2:0:0:0: [sda] Write Protect is off
[ 36.612059] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.612106] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 36.612111] sda: sda1 sda2 < sda5 >
[ 36.652498] sd 2:0:0:0: [sda] Attached SCSI disk
[ 240.185495] PM: Starting manual resume from disk
[ 240.185499] PM: Resume from partition 8:5
[ 240.185502] PM: Checking hibernation image.
[ 240.185728] PM: Resume from disk failed.
[ 240.212530] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 240.212534] EXT3-fs: write access will be enabled during recovery.
[ 241.224459] kjournald starting. Commit interval 5 seconds
[ 241.224494] EXT3-fs: recovery complete.
[ 241.224955] EXT3-fs: mounted filesystem with ordered data mode.
[ 249.507695] udevd version 124 started
[ 250.043301] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 250.131100] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 250.358382] ACPI: Battery Slot [BAT1] (battery present)
[ 250.461247] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 250.485059] ACPI: Power Button (FF) [PWRF]
[ 250.485257] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 250.517046] ACPI: Power Button (CM) [PWRB]
[ 250.518926] ACPI: AC Adapter [ACAD] (on-line)
[ 250.519030] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 250.521829] ACPI: Lid Switch [LID]
[ 250.521923] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 250.543842] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410,
revision 0
[ 250.553034] ACPI: Sleep Button (CM) [SLPB]
[ 250.613984] ACPI: WMI: Mapper loaded
[ 251.216508] Yenta: CardBus bridge found at 0000:08:01.0 [1025:010f]
[ 251.216541] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 251.216543] Yenta: Routing CardBus interrupts to PCI
[ 251.216551] Yenta TI: socket 0000:08:01.0, mfunc 0x00001202, devctl 0x44
[ 251.253955] sdhci: Secure Digital Host Controller Interface driver
[ 251.253960] sdhci: Copyright(c) Pierre Ossman
[ 251.446241] Yenta: ISA IRQ mask 0x0cf8, PCI irq 23
[ 251.446250] Socket status: 30000006
[ 251.446254] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to
#0c
[ 251.446260] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 251.446264] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
[ 251.446267] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 251.458968] sdhci-pci 0000:08:01.2: SDHCI controller found [1524:0550] (rev
1)
[ 251.458994] sdhci-pci 0000:08:01.2: PCI INT B -> GSI 22 (level, low) -> IRQ
22
[ 251.459121] mmc0: SDHCI controller on PCI [0000:08:01.2] using PIO
[ 251.462212] sdhci-pci 0000:08:01.4: SDHCI controller found [1524:0551] (rev
1)
[ 251.462234] sdhci-pci 0000:08:01.4: enabling device (0000 -> 0002)
[ 251.462245] sdhci-pci 0000:08:01.4: PCI INT B -> GSI 22 (level, low) -> IRQ
22
[ 251.462358] mmc1: SDHCI controller on PCI [0000:08:01.4] using PIO
[ 251.511232] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 252.166210] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 252.201352] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 252.319042] b43-phy0: Broadcom 4318 WLAN found
[ 252.387288] phy0: Selected rate control algorithm 'pid'
[ 252.415512] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps:
0xa04713/0x204000
[ 252.469249] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input8
[ 252.472128] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 254.504693] lp: driver loaded but no devices found
[ 254.763015] Adding 2249060k swap on /dev/sda5. Priority:-1 extents:1
across:2249060k
[ 384.114829] EXT3 FS on sda1, internal journal
[ 385.175152] type=1505 audit(1226105291.911:2): operation="profile_load"
name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4492
[ 385.410740] type=1505 audit(1226105292.147:3): operation="profile_load"
name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4497
[ 385.411029] type=1505 audit(1226105292.147:4): operation="profile_load"
name="/usr/sbin/cupsd" name2="default" pid=4497
[ 385.617517] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 385.775666] eth0: link down
[ 387.196961] NET: Registered protocol family 17
[ 459.982292] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology
TL-52 processors (2 cpu cores) (version 2.20.00)
[ 459.982363] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
[ 459.982368] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 461.585636] warning: `avahi-daemon' uses 32-bit capabilities (legacy support
in use)
[ 461.821630] ppdev: user-space parallel port driver
[ 463.704060] Clocksource tsc unstable (delta = -112460252 ns)
[ 467.803896] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 468.160170] [drm] Initialized drm 1.1.0 20060810
[ 468.190806] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 468.726710] [drm] Setting GART location based on new memory map
[ 468.729784] [drm] Loading R300 Microcode
[ 468.729846] [drm] Num pipes: 2
[ 468.729857] [drm] writeback test succeeded in 1 usecs
[ 469.829701] input: b43-phy0 as /devices/virtual/input/input9
[ 469.940099] firmware: requesting b43/ucode5.fw
[ 469.990769] firmware: requesting b43/pcm5.fw
[ 470.003312] firmware: requesting b43/b0g0initvals5.fw
[ 470.062049] firmware: requesting b43/b0g0bsinitvals5.fw
[ 470.236082] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 470.364673] Registered led device: b43-phy0::tx
[ 470.364737] Registered led device: b43-phy0::rx
[ 470.364802] Registered led device: b43-phy0::radio
[ 470.868067] b43-phy0: Radio hardware status changed to DISABLED
[ 470.933052] b43-phy0: Radio turned on by software
[ 470.933074] b43-phy0: The hardware RF-kill button still turns the radio
physically off. Press the button to turn it on.
[ 483.539986] hda-intel: Invalid position buffer, using LPIB read method
instead.
[ 505.494311] canberra-gtk-pl[5959]: segfault at 101221bf0 ip 00007f3a7a2a46ec
sp 00000000418a5d20 error 6 in libc-2.8.90.so[7f3a7a228000+169000]
[ 510.951889] CPU0 attaching NULL sched-domain.
[ 510.951936] CPU1 attaching NULL sched-domain.
[ 510.965171] CPU0 attaching sched-domain:
[ 510.965190] domain 0: span 0-1 level CPU
[ 510.965198] groups: 0 1
[ 510.965210] domain 1: span 0-1 level NODE
[ 510.965217] groups: 0-1
[ 510.965228] CPU1 attaching sched-domain:
[ 510.965235] domain 0: span 0-1 level CPU
[ 510.965240] groups: 1 0
[ 510.965248] domain 1: span 0-1 level NODE
[ 510.965254] groups: 0-1
[ 565.787846] pcmcia: Detected deprecated PCMCIA ioctl usage from process:
lshw.
[ 565.787856] pcmcia: This interface will soon be removed from the kernel;
please expect breakage unless you upgrade to new tools.
[ 565.787860] pcmcia: see
http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
[ 577.224310] type=1503 audit(1226105483.959:5): operation="inode_permission"
requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6167/net/" pid=6167
profile="/usr/sbin/cupsd"
[ 578.327798] type=1503 audit(1226105485.063:6): operation="inode_permission"
requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6171/net/" pid=6171
profile="/usr/sbin/cupsd"
[ 578.449471] NET: Registered protocol family 10
[ 578.454911] lo: Disabled Privacy Extensions
[ 578.458813] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 578.462285] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 578.468981] type=1503 audit(1226105485.203:7): operation="socket_create"
family="ax25" sock_type="dgram" protocol=0 pid=6171 profile="/usr/sbin/cupsd"
[ 578.478799] type=1503 audit(1226105485.215:8): operation="socket_create"
family="netrom" sock_type="seqpacket" protocol=0 pid=6171
profile="/usr/sbin/cupsd"
[ 578.483875] type=1503 audit(1226105485.219:9): operation="socket_create"
family="rose" sock_type="dgram" protocol=0 pid=6171 profile="/usr/sbin/cupsd"
[ 578.489977] type=1503 audit(1226105485.227:10): operation="socket_create"
family="ipx" sock_type="dgram" protocol=0 pid=6171 profile="/usr/sbin/cupsd"
[ 578.490010] type=1503 audit(1226105485.227:11): operation="socket_create"
family="appletalk" sock_type="dgram" protocol=0 pid=6171
profile="/usr/sbin/cupsd"
[ 578.490026] type=1503 audit(1226105485.227:12): operation="socket_create"
family="econet" sock_type="dgram" protocol=0 pid=6171 profile="/usr/sbin/cupsd"
[ 578.490042] type=1503 audit(1226105485.227:13): operation="socket_create"
family="ash" sock_type="dgram" protocol=0 pid=6171 profile="/usr/sbin/cupsd"
[ 828.515572] end_request: I/O error, dev sr0, sector 0
[ 828.515605] __ratelimit: 6 callbacks suppressed
[ 828.515614] Buffer I/O error on device sr0, logical block 0
[ 828.515628] Buffer I/O error on device sr0, logical block 1
[ 828.515644] Buffer I/O error on device sr0, logical block 2
[ 828.515651] Buffer I/O error on device sr0, logical block 3
[ 828.515658] Buffer I/O error on device sr0, logical block 4
[ 828.515665] Buffer I/O error on device sr0, logical block 5
[ 828.515672] Buffer I/O error on device sr0, logical block 6
[ 828.515679] Buffer I/O error on device sr0, logical block 7
[ 828.519473] end_request: I/O error, dev sr0, sector 0
[ 828.519481] Buffer I/O error on device sr0, logical block 0
[ 828.523293] end_request: I/O error, dev sr0, sector 4
[ 828.523299] Buffer I/O error on device sr0, logical block 1
[ 1228.402974] end_request: I/O error, dev sr0, sector 0
[ 1228.402998] Buffer I/O error on device sr0, logical block 0
[ 1228.403007] Buffer I/O error on device sr0, logical block 1
[ 1228.403021] Buffer I/O error on device sr0, logical block 2
[ 1228.403028] Buffer I/O error on device sr0, logical block 3
[ 1228.403035] Buffer I/O error on device sr0, logical block 4
[ 1228.403042] Buffer I/O error on device sr0, logical block 5
[ 1228.403048] Buffer I/O error on device sr0, logical block 6
[ 1228.403055] Buffer I/O error on device sr0, logical block 7
[ 1228.407843] end_request: I/O error, dev sr0, sector 0
[ 1228.407852] Buffer I/O error on device sr0, logical block 0
[ 1228.407859] Buffer I/O error on device sr0, logical block 1
[ 1298.400976] end_request: I/O error, dev sr0, sector 0
[ 1298.401049] Buffer I/O error on device sr0, logical block 0
[ 1298.401059] Buffer I/O error on device sr0, logical block 1
[ 1298.401091] Buffer I/O error on device sr0, logical block 2
[ 1298.401101] Buffer I/O error on device sr0, logical block 3
[ 1298.401110] Buffer I/O error on device sr0, logical block 4
[ 1298.401118] Buffer I/O error on device sr0, logical block 5
[ 1298.401128] Buffer I/O error on device sr0, logical block 6
[ 1298.401136] Buffer I/O error on device sr0, logical block 7
[ 1298.405272] end_request: I/O error, dev sr0, sector 0
[ 1298.405284] Buffer I/O error on device sr0, logical block 0
[ 1298.413941] end_request: I/O error, dev sr0, sector 4
[ 1298.413970] Buffer I/O error on device sr0, logical block 1
[ 1523.384036] end_request: I/O error, dev sr0, sector 0
[ 1523.384061] Buffer I/O error on device sr0, logical block 0
[ 1523.384071] Buffer I/O error on device sr0, logical block 1
[ 1523.384084] Buffer I/O error on device sr0, logical block 2
[ 1523.384091] Buffer I/O error on device sr0, logical block 3
[ 1523.384098] Buffer I/O error on device sr0, logical block 4
[ 1523.384105] Buffer I/O error on device sr0, logical block 5
[ 1523.384112] Buffer I/O error on device sr0, logical block 6
[ 1523.384118] Buffer I/O error on device sr0, logical block 7
[ 1523.404744] end_request: I/O error, dev sr0, sector 0
[ 1523.404772] Buffer I/O error on device sr0, logical block 0
[ 1523.412495] end_request: I/O error, dev sr0, sector 4
[ 1523.412522] Buffer I/O error on device sr0, logical block 1
[ 1756.268369] CPU0 attaching NULL sched-domain.
[ 1756.268442] CPU1 attaching NULL sched-domain.
[ 1756.304876] CPU0 attaching sched-domain:
[ 1756.304901] domain 0: span 0-1 level MC
[ 1756.304909] groups: 0 1
[ 1756.304922] domain 1: span 0-1 level CPU
[ 1756.304929] groups: 0-1
[ 1756.304936] domain 2: span 0-1 level NODE
[ 1756.304941] groups: 0-1
[ 1756.304957] CPU1 attaching sched-domain:
[ 1756.304961] domain 0: span 0-1 level MC
[ 1756.304966] groups: 1 0
[ 1756.304974] domain 1: span 0-1 level CPU
[ 1756.304979] groups: 0-1
[ 1756.304986] domain 2: span 0-1 level NODE
[ 1756.304991] groups: 0-1
[ 1757.045041] hda-intel: IRQ timing workaround is activated for card #0.
Suggest a bigger bdl_pos_adj.
[ 1902.839936] CPU0 attaching NULL sched-domain.
[ 1902.839975] CPU1 attaching NULL sched-domain.
[ 1902.857201] CPU0 attaching sched-domain:
[ 1902.857216] domain 0: span 0-1 level CPU
[ 1902.857223] groups: 0 1
[ 1902.857235] domain 1: span 0-1 level NODE
[ 1902.857241] groups: 0-1
[ 1902.857249] CPU1 attaching sched-domain:
[ 1902.857254] domain 0: span 0-1 level CPU
[ 1902.857260] groups: 1 0
[ 1902.857268] domain 1: span 0-1 level NODE
[ 1902.857273] groups: 0-1
[ 2153.595666] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 2153.596286] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2163.836065] eth0: no IPv6 routers present
[ 2324.354985] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 2334.400056] eth0: no IPv6 routers present
[ 4458.045624] input: b43-phy0 as /devices/virtual/input/input10
[ 4458.269092] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 4458.525694] Registered led device: b43-phy0::tx
[ 4458.525812] Registered led device: b43-phy0::rx
[ 4458.525875] Registered led device: b43-phy0::radio
[ 4458.562025] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4459.069070] b43-phy0: Radio hardware status changed to DISABLED
[ 8340.739146] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 8340.774610] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 8393.670773] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 8393.679021] sr0: CDROM not ready. Make sure there is a disc in the drive.
[EMAIL PROTECTED]:~/lib/python/wichien$
--
does not shut down
https://bugs.launchpad.net/bugs/295407
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
