please don't paste your entire dmesg output into the bug description, it is bad
practice. paste it into gedit, save as a file and attach that file. that will
make it easier for us to help you...
thank you
** Description changed:
Can not mount DVD (internal) Hardware: ok, Jumper: ok, Cable: ok
***********************************************************************************
[EMAIL PROTECTED]:~$ sudo mount /dev/dvd
[sudo] password for ralf:
mount: blockorientiertes Gerät /dev/scd0 ist schreibgeschützt, wird
eingehängt im Nur-Lese-Modus
mount: wrong fs type, bad option, bad superblock on /dev/scd0,
missing codepage or helper program, or other error
Manchmal liefert das Syslog wertvolle Informationen – versuchen
Sie dmesg | tail oder so
-
***********************************************************************************
-
- dmesg:
- [ 25.151803] Initializing cgroup subsys cpuacct
- [ 25.151811] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000e3bd 00000000 00000001 00000000
- [ 25.151817] monitor/mwait feature present.
- [ 25.151819] using mwait in idle threads.
- [ 25.151821] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 25.151823] CPU: L2 cache: 4096K
- [ 25.151825] CPU: Physical Processor ID: 0
- [ 25.151826] CPU: Processor Core ID: 0
- [ 25.151828] CPU: After all inits, caps: bfebfbff 20100000 00000000
00003940 0000e3bd 00000000 00000001 00000000
- [ 25.151835] Compat vDSO mapped to ffffe000.
- [ 25.151845] Checking 'hlt' instruction... OK.
- [ 25.167994] SMP alternatives: switching to UP code
- [ 25.169290] Early unpacking initramfs... done
- [ 25.448411] ACPI: Core revision 20070126
- [ 25.448442] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml
not found.
- [ 26.437218] CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping
06
- [ 26.437232] SMP alternatives: switching to SMP code
- [ 26.437812] Booting processor 1/1 eip 3000
- [ 26.448102] Initializing CPU#1
- [ 26.524779] Calibrating delay using timer specific routine.. 4266.68
BogoMIPS (lpj=8533365)
- [ 26.524785] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000e3bd 00000000 00000001 00000000
- [ 26.524789] monitor/mwait feature present.
- [ 26.524791] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 26.524793] CPU: L2 cache: 4096K
- [ 26.524794] CPU: Physical Processor ID: 0
- [ 26.524795] CPU: Processor Core ID: 1
- [ 26.524796] CPU: After all inits, caps: bfebfbff 20100000 00000000
00003940 0000e3bd 00000000 00000001 00000000
- [ 26.525476] CPU1: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping
06
- [ 26.525492] Total of 2 processors activated (8536.57 BogoMIPS).
- [ 26.525630] ENABLING IO-APIC IRQs
- [ 26.525788] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 26.672553] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 26.692524] Brought up 2 CPUs
- [ 26.692544] CPU0 attaching sched-domain:
- [ 26.692546] domain 0: span 03
- [ 26.692547] groups: 01 02
- [ 26.692550] CPU1 attaching sched-domain:
- [ 26.692551] domain 0: span 03
- [ 26.692552] groups: 02 01
- [ 26.692730] net_namespace: 64 bytes
- [ 26.692739] Booting paravirtualized kernel on bare hardware
- [ 26.693091] Time: 7:32:26 Date: 07/01/08
- [ 26.693112] NET: Registered protocol family 16
- [ 26.693265] EISA bus registered
- [ 26.693268] ACPI: bus type pci registered
- [ 26.699076] PCI: PCI BIOS revision 3.00 entry at 0xfb430, last bus=5
- [ 26.699078] PCI: Using configuration type 1
- [ 26.699099] Setting up standard PCI resources
- [ 26.699808] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 26.699810] mtrr: probably your BIOS does not setup all CPUs.
- [ 26.699811] mtrr: corrected configuration.
- [ 26.700857] ACPI: EC: Look up EC in DSDT
- [ 26.704370] ACPI: Interpreter enabled
- [ 26.704375] ACPI: (supports S0 S1 S4 S5)
- [ 26.704390] ACPI: Using IOAPIC for interrupt routing
- [ 26.708119] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 26.708702] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
- [ 26.708706] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
- [ 26.709445] PCI: Transparent bridge - 0000:00:1e.0
- [ 26.709473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 26.709593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- [ 26.709653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
- [ 26.709714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
- [ 26.709773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 26.718564] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
- [ 26.718646] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
- [ 26.718729] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
- [ 26.718808] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14
*15)
- [ 26.718887] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
- [ 26.718966] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
- [ 26.719045] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14
15)
- [ 26.719124] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14
15)
- [ 26.719228] Linux Plug and Play Support v0.97 (c) Adam Belay
- [ 26.719255] pnp: PnP ACPI init
- [ 26.719261] ACPI: bus type pnp registered
- [ 26.721032] pnpacpi: exceeded the max number of mem resources: 12
- [ 26.721145] pnp: PnP ACPI: found 13 devices
- [ 26.721147] ACPI: ACPI bus type pnp unregistered
- [ 26.721150] PnPBIOS: Disabled by ACPI PNP
- [ 26.721333] PCI: Using ACPI for IRQ routing
- [ 26.721335] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
- [ 26.776375] NET: Registered protocol family 8
- [ 26.776377] NET: Registered protocol family 20
- [ 26.776411] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 26.776416] hpet0: 3 64-bit timers, 14318180 Hz
- [ 26.777442] AppArmor: AppArmor Filesystem Enabled
- [ 26.780380] Time: tsc clocksource has been installed.
- [ 26.780391] Switched to high resolution mode on CPU 0
- [ 26.780468] Switched to high resolution mode on CPU 1
- [ 26.796393] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
- [ 26.796396] system 00:01: ioport range 0x290-0x29f has been reserved
- [ 26.796400] system 00:01: ioport range 0x800-0x87f has been reserved
- [ 26.796403] system 00:01: ioport range 0x290-0x294 has been reserved
- [ 26.796406] system 00:01: ioport range 0x880-0x88f has been reserved
- [ 26.796416] system 00:09: ioport range 0x400-0x4bf could not be reserved
- [ 26.796423] system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be
reserved
- [ 26.796429] system 00:0b: iomem range 0xcee00-0xcffff has been reserved
- [ 26.796432] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
- [ 26.796435] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
- [ 26.796437] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
- [ 26.796440] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be
reserved
- [ 26.796443] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
- [ 26.796446] system 00:0b: iomem range 0x100000-0x7fedffff could not be
reserved
- [ 26.796449] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be
reserved
- [ 26.796452] system 00:0b: iomem range 0xfed10000-0xfed1dfff could not be
reserved
- [ 26.796455] system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be
reserved
- [ 26.796458] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be
reserved
- [ 26.796461] system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be
reserved
- [ 26.826788] PCI: Bridge: 0000:00:01.0
- [ 26.826790] IO window: 5000-5fff
- [ 26.826793] MEM window: f4000000-f6ffffff
- [ 26.826795] PREFETCH window: e8000000-efffffff
- [ 26.826798] PCI: Bridge: 0000:00:1c.0
- [ 26.826800] IO window: 4000-4fff
- [ 26.826803] MEM window: disabled.
- [ 26.826806] PREFETCH window: disabled.
- [ 26.826810] PCI: Bridge: 0000:00:1c.3
- [ 26.826812] IO window: 6000-7fff
- [ 26.826815] MEM window: f9000000-f90fffff
- [ 26.826818] PREFETCH window: disabled.
- [ 26.826822] PCI: Bridge: 0000:00:1c.4
- [ 26.826824] IO window: 8000-8fff
- [ 26.826828] MEM window: f7000000-f8ffffff
- [ 26.826830] PREFETCH window: 80000000-800fffff
- [ 26.826834] PCI: Bridge: 0000:00:1e.0
- [ 26.826836] IO window: 9000-9fff
- [ 26.826840] MEM window: f9100000-f91fffff
- [ 26.826843] PREFETCH window: disabled.
- [ 26.826853] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) ->
IRQ 16
- [ 26.826857] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 26.826872] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) ->
IRQ 16
- [ 26.826876] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 26.826891] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) ->
IRQ 17
- [ 26.826895] PCI: Setting latency timer of device 0000:00:1c.3 to 64
- [ 26.826909] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) ->
IRQ 16
- [ 26.826913] PCI: Setting latency timer of device 0000:00:1c.4 to 64
- [ 26.826921] PCI: Setting latency timer of device 0000:00:1e.0 to 64
- [ 26.826930] NET: Registered protocol family 2
- [ 26.864265] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
- [ 26.864472] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
- [ 26.864795] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 26.864942] TCP: Hash tables configured (established 131072 bind 65536)
- [ 26.864943] TCP reno registered
- [ 26.876296] checking if image is initramfs... it is
- [ 27.426882] Freeing initrd memory: 7703k freed
- [ 27.427507] audit: initializing netlink socket (disabled)
- [ 27.427517] audit(1214897545.245:1): initialized
- [ 27.427681] highmem bounce pool size: 64 pages
- [ 27.429264] VFS: Disk quotas dquot_6.5.1
- [ 27.429322] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 27.429426] io scheduler noop registered
- [ 27.429427] io scheduler anticipatory registered
- [ 27.429429] io scheduler deadline registered
- [ 27.429440] io scheduler cfq registered (default)
- [ 27.429546] Boot video device is 0000:01:00.0
- [ 27.429628] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 27.429656] assign_interrupt_mode Found MSI capability
- [ 27.429679] Allocate Port Service[0000:00:01.0:pcie00]
- [ 27.429741] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 27.429774] assign_interrupt_mode Found MSI capability
- [ 27.429802] Allocate Port Service[0000:00:1c.0:pcie00]
- [ 27.429827] Allocate Port Service[0000:00:1c.0:pcie02]
- [ 27.429892] PCI: Setting latency timer of device 0000:00:1c.3 to 64
- [ 27.429926] assign_interrupt_mode Found MSI capability
- [ 27.429953] Allocate Port Service[0000:00:1c.3:pcie00]
- [ 27.429979] Allocate Port Service[0000:00:1c.3:pcie02]
- [ 27.430046] PCI: Setting latency timer of device 0000:00:1c.4 to 64
- [ 27.430079] assign_interrupt_mode Found MSI capability
- [ 27.430106] Allocate Port Service[0000:00:1c.4:pcie00]
- [ 27.430132] Allocate Port Service[0000:00:1c.4:pcie02]
- [ 27.430324] isapnp: Scanning for PnP cards...
- [ 27.782725] isapnp: No Plug & Play device found
- [ 27.802636] Real Time Clock Driver v1.12ac
- [ 27.802727] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
- [ 27.803926] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
- [ 27.803979] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
- [ 27.804053] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 27.804055] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
- [ 27.804153] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 27.826259] mice: PS/2 mouse device common for all mice
- [ 27.826376] EISA: Probing bus 0 at eisa.0
- [ 27.826391] Cannot allocate resource for EISA slot 4
- [ 27.826393] Cannot allocate resource for EISA slot 5
- [ 27.826395] Cannot allocate resource for EISA slot 6
- [ 27.826397] Cannot allocate resource for EISA slot 7
- [ 27.826399] Cannot allocate resource for EISA slot 8
- [ 27.826401] EISA: Detected 0 cards.
- [ 27.826413] cpuidle: using governor ladder
- [ 27.826415] cpuidle: using governor menu
- [ 27.826475] NET: Registered protocol family 1
- [ 27.826495] Using IPI No-Shortcut mode
- [ 27.826515] registered taskstats version 1
- [ 27.826607] Magic number: 0:298:520
- [ 27.826644] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 27.826646] EDD information not available.
- [ 27.826775] Freeing unused kernel memory: 368k freed
- [ 27.851951] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
- [ 28.998176] fuse init (API version 7.9)
- [ 29.014169] ACPI: Processor [CPU0] (supports 2 throttling states)
- [ 29.014262] ACPI: SSDT 7FEE81C0, 0087 (r1 PmRef Cpu1Ist 3000 INTL
20040311)
- [ 29.014380] ACPI: Processor [CPU1] (supports 2 throttling states)
- [ 29.014392] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
- [ 29.014401] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
- [ 29.151613] usbcore: registered new interface driver usbfs
- [ 29.151631] usbcore: registered new interface driver hub
- [ 29.151893] usbcore: registered new device driver usb
- [ 29.152772] USB Universal Host Controller Interface driver v3.0
- [ 29.152807] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) ->
IRQ 16
- [ 29.152815] PCI: Setting latency timer of device 0000:00:1a.0 to 64
- [ 29.152819] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 29.152979] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 1
- [ 29.153003] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b000
- [ 29.153103] usb usb1: configuration #1 chosen from 1 choice
- [ 29.153122] hub 1-0:1.0: USB hub found
- [ 29.153125] hub 1-0:1.0: 2 ports detected
- [ 29.255179] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) ->
IRQ 18
- [ 29.255187] PCI: Setting latency timer of device 0000:00:1a.1 to 64
- [ 29.255190] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 29.255207] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 2
- [ 29.255229] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000a000
- [ 29.255314] usb usb2: configuration #1 chosen from 1 choice
- [ 29.255334] hub 2-0:1.0: USB hub found
- [ 29.255337] hub 2-0:1.0: 2 ports detected
- [ 29.284213] SCSI subsystem initialized
- [ 29.314731] libata version 3.00 loaded.
- [ 29.355290] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 29.358992] ahci 0000:03:00.0: version 3.0
- [ 29.359018] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) ->
IRQ 17
- [ 29.387924] Floppy drive(s): fd0 is 1.44M
- [ 29.410140] FDC 0 is a post-1991 82077
- [ 29.494628] usb 1-1: new low speed USB device using uhci_hcd and address 2
- [ 29.669038] usb 1-1: configuration #1 chosen from 1 choice
- [ 30.360890] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
- [ 30.360894] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum
part
- [ 30.360900] PCI: Setting latency timer of device 0000:03:00.0 to 64
- [ 30.361028] scsi0 : ahci
- [ 30.361169] scsi1 : ahci
- [ 30.361218] ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf9000100
irq 17
- [ 30.361222] ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf9000180
irq 17
- [ 30.680141] ata1: SATA link down (SStatus 0 SControl 300)
- [ 30.999440] ata2: SATA link down (SStatus 0 SControl 300)
- [ 30.999509] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
- [ 30.999516] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) ->
IRQ 16
- [ 30.999549] PCI: Setting latency timer of device 0000:03:00.1 to 64
- [ 30.999604] scsi2 : pata_jmicron
- [ 30.999753] scsi3 : pata_jmicron
- [ 31.000148] ata3: PATA max UDMA/100 cmd 0x6000 ctl 0x6400 bmdma 0x7000 irq
16
- [ 31.000151] ata4: PATA max UDMA/100 cmd 0x6800 ctl 0x6c00 bmdma 0x7008 irq
16
- [ 31.319284] ata3.00: ATAPI: Optiarc DVD RW AD-7173A, 1-01, max UDMA/66
- [ 31.490945] ata3.00: configured for UDMA/66
- [ 31.658625] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7173A 1-01
PQ: 0 ANSI: 5
- [ 31.658917] 8139cp 0000:05:02.0: This (id 10ec:8139 rev 10) is not an
8139C+ compatible chip
- [ 31.658920] 8139cp 0000:05:02.0: Try the "8139too" driver instead.
- [ 31.659765] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 19
- [ 31.659772] PCI: Setting latency timer of device 0000:00:1d.0 to 64
- [ 31.659776] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 31.659795] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 3
- [ 31.659818] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000a400
- [ 31.659914] usb usb3: configuration #1 chosen from 1 choice
- [ 31.659934] hub 3-0:1.0: USB hub found
- [ 31.659937] hub 3-0:1.0: 2 ports detected
- [ 31.661241] 8139too Fast Ethernet driver 0.9.28
- [ 31.761865] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 17
- [ 31.761873] PCI: Setting latency timer of device 0000:00:1d.1 to 64
- [ 31.761877] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 31.761902] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 4
- [ 31.761923] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000a800
- [ 31.762038] usb usb4: configuration #1 chosen from 1 choice
- [ 31.762056] hub 4-0:1.0: USB hub found
- [ 31.762059] hub 4-0:1.0: 2 ports detected
- [ 31.865644] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 20
- [ 31.865652] PCI: Setting latency timer of device 0000:00:1d.2 to 64
- [ 31.865655] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 31.865677] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 5
- [ 31.865700] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ac00
- [ 31.865816] usb usb5: configuration #1 chosen from 1 choice
- [ 31.865834] hub 5-0:1.0: USB hub found
- [ 31.865838] hub 5-0:1.0: 2 ports detected
- [ 31.969464] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 17
- [ 31.969489] PCI: Setting latency timer of device 0000:00:1f.2 to 64
- [ 31.969500] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
- [ 31.969519] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) ->
IRQ 17
- [ 31.969538] PCI: Setting latency timer of device 0000:00:1f.5 to 64
- [ 31.969548] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
- [ 31.969609] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) ->
IRQ 20
- [ 31.970218] eth0: RealTek RTL8139 at 0x9000, 00:08:a1:66:d9:03, IRQ 20
- [ 31.970221] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
- [ 31.971141] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) ->
IRQ 20
- [ 31.971149] PCI: Setting latency timer of device 0000:00:1a.7 to 64
- [ 31.971152] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 31.971171] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 6
- [ 31.975062] PCI: cache line size of 32 is not supported by device
0000:00:1a.7
- [ 31.975066] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf9205000
- [ 31.990301] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
- [ 31.990382] usb usb6: configuration #1 chosen from 1 choice
- [ 31.990402] hub 6-0:1.0: USB hub found
- [ 31.990406] hub 6-0:1.0: 4 ports detected
- [ 32.002257] usbcore: registered new interface driver hiddev
- [ 32.022147] usbcore: registered new interface driver usbhid
- [ 32.022151] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
- [ 32.025309] usb 1-1: USB disconnect, address 2
- [ 32.094213] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 19
- [ 32.094224] PCI: Setting latency timer of device 0000:00:1d.7 to 64
- [ 32.094227] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 32.094251] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 7
- [ 32.098132] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
- [ 32.098136] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf9204000
- [ 32.114076] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
- [ 32.114172] usb usb7: configuration #1 chosen from 1 choice
- [ 32.114196] hub 7-0:1.0: USB hub found
- [ 32.114201] hub 7-0:1.0: 6 ports detected
- [ 32.217026] ata_piix 0000:00:1f.2: version 2.12
- [ 32.217032] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 32.372528] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 17
- [ 32.372556] PCI: Setting latency timer of device 0000:00:1f.2 to 64
- [ 32.372590] scsi4 : ata_piix
- [ 32.372743] scsi5 : ata_piix
- [ 32.373142] ata5: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xc400 irq
17
- [ 32.373144] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xc408 irq
17
- [ 32.544334] ata5.00: HPA unlocked: 312579695 -> 312581808, native 312581808
- [ 32.544340] ata5.00: ATA-8: SAMSUNG HD161HJ, JF100-14, max UDMA7
- [ 32.544344] ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 32.552413] ata5.00: configured for UDMA/133
- [ 32.718498] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10
PQ: 0 ANSI: 5
- [ 32.718550] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- [ 32.718562] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) ->
IRQ 17
- [ 32.718582] PCI: Setting latency timer of device 0000:00:1f.5 to 64
- [ 32.718604] scsi6 : ata_piix
- [ 32.718637] scsi7 : ata_piix
- [ 32.718969] ata7: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq
17
- [ 32.718972] ata8: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq
17
- [ 32.759725] usb 1-1: new low speed USB device using uhci_hcd and address 3
- [ 32.930350] usb 1-1: configuration #1 chosen from 1 choice
- [ 32.951480] input: Logitech USB RECEIVER as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input2
- [ 32.983267] input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on
usb-0000:00:1a.0-1
- [ 33.053555] Driver 'sd' needs updating - please use bus_type methods
- [ 33.053614] sd 4:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
- [ 33.053624] sd 4:0:0:0: [sda] Write Protect is off
- [ 33.053625] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 33.053638] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
- [ 33.053676] sd 4:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
- [ 33.053684] sd 4:0:0:0: [sda] Write Protect is off
- [ 33.053686] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 33.053699] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
- [ 33.053701] sda:<4>Driver 'sr' needs updating - please use bus_type
methods
- [ 33.056683] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
- [ 33.056685] Uniform CD-ROM driver Revision: 3.20
- [ 33.056717] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 33.065158] sda1 sda2 sda3
- [ 33.065591] sd 4:0:0:0: [sda] Attached SCSI disk
- [ 33.068992] sr 2:0:0:0: Attached scsi generic sg0 type 5
- [ 33.069008] sd 4:0:0:0: Attached scsi generic sg1 type 0
- [ 33.236880] Attempting manual resume
- [ 33.236882] swsusp: Resume From Partition 8:1
- [ 33.236884] PM: Checking swsusp image.
- [ 33.237003] PM: Resume from disk failed.
- [ 33.278115] kjournald starting. Commit interval 5 seconds
- [ 33.278123] EXT3-fs: mounted filesystem with ordered data mode.
- [ 39.078572] input: PC Speaker as /devices/platform/pcspkr/input/input3
- [ 39.318010] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 39.349563] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 39.430530] iTCO_vendor_support: vendor-support=0
- [ 39.470446] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
- [ 39.470505] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2,
TCOBASE=0x0460)
- [ 39.470536] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 39.603029] parport_pc 00:07: reported by Plug and Play ACPI
- [ 39.603053] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
- [ 39.693231] Linux agpgart interface v0.102
- [ 39.718082] input: Power Button (FF) as /devices/virtual/input/input4
- [ 39.773784] ACPI: Power Button (FF) [PWRF]
- [ 39.773829] input: Power Button (CM) as /devices/virtual/input/input5
- [ 39.841637] ACPI: Power Button (CM) [PWRB]
- [ 40.078433] nvidia: module license 'NVIDIA' taints kernel.
- [ 40.394302] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
- [ 40.394313] PCI: Setting latency timer of device 0000:04:00.0 to 64
- [ 40.394334] sky2 0000:04:00.0: v1.20 addr 0xf8000000 irq 16 Yukon-EC Ultra
(0xb4) rev 3
- [ 40.394868] sky2 eth1: addr 00:1a:4d:40:6b:31
- [ 40.482010] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
- [ 40.482017] PCI: Setting latency timer of device 0000:01:00.0 to 64
- [ 40.482088] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb
14 17:53:07 PST 2008
- [ 40.550187] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- [ 40.589690] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->
IRQ 21
- [ 40.589705] PCI: Setting latency timer of device 0000:00:1b.0 to 64
- [ 40.660452] usbcore: registered new interface driver lmpcm_usb
- [ 40.660456]
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/misc/lmpcm_usb.c:
v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
- [ 41.006238] sky2 eth1: enabling interface
- [ 41.177097] lp0: using parport0 (interrupt-driven).
- [ 41.223195] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1
across:2104472k
- [ 41.779903] EXT3 FS on sda2, internal journal
- [ 41.858157] NET: Registered protocol family 17
- [ 42.560728] NET: Registered protocol family 10
- [ 42.560915] lo: Disabled Privacy Extensions
- [ 42.561411] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 42.775489] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control
both
- [ 42.777099] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 52.917730] eth1: no IPv6 routers present
- [ 53.157231] eth0: no IPv6 routers present
- [ 124.783402] kjournald starting. Commit interval 5 seconds
- [ 124.783569] EXT3 FS on sda3, internal journal
- [ 124.783575] EXT3-fs: mounted filesystem with ordered data mode.
- [ 125.210797] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 125.485806] No dock devices found.
- [ 126.590896] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
- [ 126.590900] apm: disabled - APM is not SMP safe.
- [ 126.702724] ppdev: user-space parallel port driver
- [ 126.889916] audit(1214897646.635:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=6270 profile="/usr/sbin/cupsd" namespace="default"
- [ 1005.459100] attempt to access beyond end of device
- [ 1005.459105] sr0: rw=0, want=68, limit=4
- [ 1005.463898] attempt to access beyond end of device
- [ 1005.463902] sr0: rw=0, want=1252, limit=4
- [ 1005.463907] attempt to access beyond end of device
- [ 1005.463909] sr0: rw=0, want=1028, limit=4
- [ 1005.463912] UDF-fs: No partition found (1)
- [ 1005.470981] attempt to access beyond end of device
- [ 1005.470985] sr0: rw=0, want=68, limit=4
- [ 1005.470990] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16,
block=16
- [EMAIL PROTECTED]:~$
-
fstab (test): (not functional)
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda2
UUID=a629d3c2-1c1a-4e53-b7d8-76b2ae4ee3ad / ext3
relatime,errors=remount-ro 0 1
# /dev/sda3
UUID=56f62f33-d94e-409d-9310-e31c8773f249 /home ext3 relatime
0 2
# /dev/sda1
UUID=5aa0b2fb-9a94-4585-add2-8c5f950965ad none swap sw
0 0
/dev/dvd /media/dvd udf,iso9660 user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
fstab (old): (not functional)
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda2
UUID=a629d3c2-1c1a-4e53-b7d8-76b2ae4ee3ad / ext3
relatime,errors=remount-ro 0 1
# /dev/sda3
UUID=56f62f33-d94e-409d-9310-e31c8773f249 /home ext3 relatime
0 2
# /dev/sda1
UUID=5aa0b2fb-9a94-4585-add2-8c5f950965ad none swap sw
0 0
/dev/scd0 /media/cdrom udf,iso9660 rw,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
ProblemType: Bug
Architecture: i386
Date: Tue Jul 1 09:42:12 2008
DistroRelease: Ubuntu 8.04
ExecutablePath: /usr/bin/nautilus
NonfreeKernelModules: nvidia
Package: nautilus 1:2.22.3-0ubuntu2
PackageArchitecture: i386
ProcEnviron:
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
LANG=de_DE.UTF-8
SHELL=/bin/bash
SourcePackage: nautilus
Uname: Linux 2.6.24-19-generic i686
** Attachment added: "dmesg"
http://launchpadlibrarian.net/19790766/dmesg
--
mounting dvd says: block device is write protected
https://bugs.launchpad.net/bugs/244445
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
