If you used the via82cxxx in edgy, then your drives were hda2 and hdb2,
right?
More than likely you need to tell mdadm that you are using sda and sdb
now. Check /etc/mdadm/mdadm.conf.
I suggest instead of device names, you use the UUID symlinks in
/dev/disk/by-uuid/, so instead of /dev/sdb, you would use /dev/disk/by-
uuid/XXXXXXXX-part2, for instance.
** Changed in: linux-source-2.6.19 (Ubuntu)
Status: Unconfirmed => Needs Info
--
no devices found for /dev/md0 at startup
https://launchpad.net/bugs/73952
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
