** Attachment added: "uname" http://launchpadlibrarian.net/20092098/uname-a.log
** Description changed: Binary package hint: linux-image-2.6.27-7-generic My Nova T 500 card works well in Hardy with kernel 2.6.24-22-386 and earlier. It fails utterly in Intrepid Ibex Ubuntu 8.10 with kernel 2.6.27-7-generic The problem is that the firmware always fails to load first time. - - [ 23.538141] dib0700: loaded with support for 8 different device-types - [ 23.539042] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in - cold state, will try to load a firmware - [ 23.539051] firmware: requesting dvb-usb-dib0700-1.20.fw - [ 24.890408] lirc_dev: IR Remote Control driver registered, major 61 - [ 25.090680] Linux video capture interface: v2.00 - [ 25.214298] dvb-usb: downloading firmware from file - 'dvb-usb-dib0700-1.20.fw' - [ 26.368174] dib0700: firmware download failed at 20146 with -110 - [ 26.368380] usbcore: registered new interface driver dvb_usb_dib0700 - - The number the firmware download fails at changes, but the "with -110" - is always the same. + The number the firmware download fails at changes, but the "with -110" is always the same. I've installed the same recent drivers and firmware from http://linuxtv.org/hg/v4l-dvb over both the 2.6.24 and 2.6.27 kernels. The problem remains the same on 2.6.27 and still does not appear with 2.6.24. This make me think the unwanted feature is closer to usb-core that it is to the dvb-usb-dib0700. The problem also still exists in linux-image-2.6.27-9-generic. [ 27.612619] dib0700: loaded with support for 8 different device-types [ 27.612833] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 27.612841] firmware: requesting dvb-usb-dib0700-1.20.fw [ 27.698890] Linux video capture interface: v2.00 [ 27.768667] lirc_dev: IR Remote Control driver registered, major 61 [ 29.481341] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 30.564132] dib0700: firmware download failed at 9562 with -110 [ 30.564345] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990) [ 30.567037] lirc_streamzap[-1]: Streamzap, Inc. Streamzap Remote Control on usb3:9 attached [ 30.567042] lirc_dev: lirc_register_plugin: sample_rate: 0 [ 30.568907] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 30.573985] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:13.2/usb3/3-8/3-8.4/3-8.4.1/3-8.4.1.4/3-8.4.1.4:1.0/input/input6 [ 30.576353] usbcore: registered new interface driver dvb_usb_dib0700 If I remove the modules and then modprobe dvb-usb-dib0700 the firmware always loads. [ 94.386237] usbcore: deregistering interface driver uvcvideo [ 94.403883] usbcore: deregistering interface driver dvb_usb_dib0700 [ 94.528808] dib0700: loaded with support for 8 different device-types [ 94.530948] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 94.530961] firmware: requesting dvb-usb-dib0700-1.20.fw [ 94.542518] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 94.758194] dib0700: firmware started successfully. [ 95.262390] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 95.262488] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 95.263210] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 95.385822] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)... [ 95.486947] MT2060: successfully identified (IF1 = 1229) [ 95.975143] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 95.975384] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 95.982037] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)... [ 95.993671] MT2060: successfully identified (IF1 = 1217) [ 96.561364] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 96.561689] usbcore: registered new interface driver dvb_usb_dib0700 (Although the system fails a within a couple of hours, with a what seems to be Bug204857 re-surfacing.) [ 230.456120] dvb-usb: error while enabling fifo. [ 1958.525133] dvb-usb: error while stopping stream. [ 1976.092180] mt2060 I2C write failed [ 2281.908116] mt2060 I2C write failed [ 2676.912186] mt2060 I2C write failed [ 2806.924148] mt2060 I2C write failed (len=2) [ 2811.924179] mt2060 I2C write failed (len=6) [ 2816.924849] mt2060 I2C read failed -- Nova T 500 : dib0700: firmware download failed https://bugs.launchpad.net/bugs/303667 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
