** Description changed:
After upgrading to Intrepid the ATI driver that comes with it fails to
load. The xorg.log file even contains a stack trace (see attached
files). Failsafe X is then started and after selecting 'Run Ubuntu in
low-graphics mode' the xserver is coming up normally using the VESA
driver.
+ Backtrace:
+ 0: /usr/X11R6/bin/X(xf86SigHandler+0x79) [0x80c3009]
+ 1: [0xb80a0400]
+ 2: /usr/lib/xorg/modules/drivers//radeon_drv.so [0xb7b20b07]
+ 3: /usr/lib/xorg/modules/drivers//radeon_drv.so [0xb7aee55a]
+ 4: /usr/lib/xorg/modules/drivers//radeon_drv.so [0xb7af14fc]
+ 5: /usr/X11R6/bin/X(InitOutput+0x96f) [0x80aac9f]
+ 6: /usr/X11R6/bin/X(main+0x279) [0x8071b19]
+ 7: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7ca7685]
+ 8: /usr/X11R6/bin/X [0x8071101]
+ Saw signal 11. Server aborting.
- Output of lspci:
+ [lspci]
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller
(rev 03)
- 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller
(rev 03)
- 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
- 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
- 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
- 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI
Controller (rev 03)
- 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
- 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge
(rev 03)
- 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller
(rev 03)
- 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
Controller (rev 03)
- 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
- 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97
Modem Controller (rev 03)
- 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
Radeon 9600 M10]
- 02:04.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini
PCI Adapter (rev 04)
- 02:06.0 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus
Controller
- 02:06.1 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus
Controller
- 02:06.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus
Accelerator
- 02:06.3 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus
Controller
- 02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2
Gigabit Ethernet (rev 03)
-
-
- Output of lspci -nvv:
00:00.0 0600: 8086:3340 (rev 03)
Subsystem: 103c:0890
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at b0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
- 00:01.0 0604: 8086:3341 (rev 03)
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 64
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- I/O behind bridge: 00002000-00002fff
- Memory behind bridge: 90300000-903fffff
- Prefetchable memory behind bridge: 98000000-9fffffff
- Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Kernel modules: shpchp
-
- 00:1d.0 0c03: 8086:24c2 (rev 03)
- Subsystem: 103c:0890
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 10
- Region 4: I/O ports at 38c0 [size=32]
- Kernel driver in use: uhci_hcd
- Kernel modules: uhci-hcd
-
- 00:1d.1 0c03: 8086:24c4 (rev 03)
- Subsystem: 103c:0890
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 10
- Region 4: I/O ports at 38e0 [size=32]
- Kernel driver in use: uhci_hcd
- Kernel modules: uhci-hcd
-
- 00:1d.2 0c03: 8086:24c7 (rev 03)
- Subsystem: 103c:0890
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 10
- Region 4: I/O ports at 3c00 [size=32]
- Kernel driver in use: uhci_hcd
- Kernel modules: uhci-hcd
-
- 00:1d.7 0c03: 8086:24cd (rev 03) (prog-if 20)
- Subsystem: 103c:0890
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 10
- Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=1K]
- Capabilities: <access denied>
- Kernel driver in use: ehci_hcd
- Kernel modules: ehci-hcd
-
- 00:1e.0 0604: 8086:2448 (rev 83)
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ INTx-
- Latency: 0
- Bus: primary=00, secondary=02, subordinate=0c, sec-latency=32
- I/O behind bridge: 00004000-00005fff
- Memory behind bridge: 90000000-902fffff
- Prefetchable memory behind bridge: 20000000-2dffffff
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Kernel modules: shpchp
-
- 00:1f.0 0601: 8086:24cc (rev 03)
- Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Kernel modules: iTCO_wdt, intel-rng
-
- 00:1f.1 0101: 8086:24ca (rev 03) (prog-if 8a [Master SecP PriP])
- Subsystem: 103c:0890
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 10
- Region 0: I/O ports at 01f0 [size=8]
- Region 1: I/O ports at 03f4 [size=1]
- Region 2: I/O ports at 0170 [size=8]
- Region 3: I/O ports at 0374 [size=1]
- Region 4: I/O ports at 3c20 [size=16]
- Region 5: Memory at 2e000000 (32-bit, non-prefetchable) [size=1K]
- Kernel driver in use: ata_piix
- Kernel modules: ata_piix
-
- 00:1f.3 0c05: 8086:24c3 (rev 03)
- Subsystem: 103c:0890
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Interrupt: pin B routed to IRQ 0
- Region 4: I/O ports at 1200 [size=32]
- Kernel modules: i2c-i801
-
- 00:1f.5 0401: 8086:24c5 (rev 03)
- Subsystem: 103c:0890
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 11
- Region 0: I/O ports at 3000 [size=256]
- Region 1: I/O ports at 3880 [size=64]
- Region 2: Memory at a0100000 (32-bit, non-prefetchable) [size=512]
- Region 3: Memory at a0180000 (32-bit, non-prefetchable) [size=256]
- Capabilities: <access denied>
- Kernel driver in use: Intel ICH
- Kernel modules: snd-intel8x0
-
- 00:1f.6 0703: 8086:24c6 (rev 03)
- Subsystem: 103c:0890
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Interrupt: pin B routed to IRQ 11
- Region 0: I/O ports at 3400 [size=256]
- Region 1: I/O ports at 3800 [size=128]
- Capabilities: <access denied>
- Kernel modules: snd-intel8x0m
-
+ 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
Radeon 9600 M10]
01:00.0 0300: 1002:4e50
Subsystem: 103c:0890
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at 90300000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 90320000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
-
- 02:04.0 0280: 8086:1043 (rev 04)
- Subsystem: 8086:2522
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 64 (500ns min, 8500ns max), Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 11
- Region 0: Memory at 90080000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: <access denied>
- Kernel driver in use: ipw2100
- Kernel modules: ipw2100
-
- 02:06.0 0607: 1217:7223
- Subsystem: 103c:0890
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 168
- Interrupt: pin A routed to IRQ 10
- Region 0: Memory at 90100000 (32-bit, non-prefetchable) [size=4K]
- Bus: primary=02, secondary=03, subordinate=04, sec-latency=176
- Memory window 0: 20000000-23fff000 (prefetchable)
- Memory window 1: 30000000-33fff000
- I/O window 0: 00004000-000040ff
- I/O window 1: 00004400-000044ff
- BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
- 16-bit legacy interface ports at 0001
- Kernel driver in use: yenta_cardbus
- Kernel modules: yenta_socket
-
- 02:06.1 0607: 1217:7223
- Subsystem: 103c:0890
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 168
- Interrupt: pin A routed to IRQ 10
- Region 0: Memory at 90180000 (32-bit, non-prefetchable) [size=4K]
- Bus: primary=02, secondary=05, subordinate=08, sec-latency=176
- Memory window 0: 24000000-27fff000 (prefetchable)
- Memory window 1: 34000000-37fff000
- I/O window 0: 00004800-000048ff
- I/O window 1: 00004c00-00004cff
- BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
- 16-bit legacy interface ports at 0001
- Kernel driver in use: yenta_cardbus
- Kernel modules: yenta_socket
-
- 02:06.2 0880: 1217:7110
- Subsystem: 103c:0890
- Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Interrupt: pin A routed to IRQ 10
- Region 0: Memory at 90200000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: <access denied>
-
- 02:06.3 0607: 1217:7223
- Subsystem: 103c:0890
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 168
- Interrupt: pin A routed to IRQ 10
- Region 0: Memory at 90280000 (32-bit, non-prefetchable) [size=4K]
- Bus: primary=02, secondary=09, subordinate=0c, sec-latency=176
- Memory window 0: 28000000-2bfff000 (prefetchable)
- Memory window 1: 38000000-3bfff000
- I/O window 0: 00005000-000050ff
- I/O window 1: 00005400-000054ff
- BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
- 16-bit legacy interface ports at 0001
- Kernel driver in use: yenta_cardbus
- Kernel modules: yenta_socket
-
- 02:0e.0 0200: 14e4:165e (rev 03)
- Subsystem: 103c:0890
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 64 (16000ns min), Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 11
- Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=64K]
- [virtual] Expansion ROM at 2c000000 [disabled] [size=64K]
- Capabilities: <access denied>
- Kernel driver in use: tg3
- Kernel modules: tg3
** Summary changed:
- Intrepid: ATI driver fails to load on Mobility Radeon 9600 (RV350)
+ Intrepid: ATI driver crashes on Mobility Radeon 9600 (RV350)
--
Intrepid: ATI driver crashes on Mobility Radeon 9600 (RV350)
https://bugs.launchpad.net/bugs/294653
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
