Public bug reported:
In hardy, the player doesn't mount automatically, 'mount -t auto' fails,
'mount -t vfat' works. Weird filesystem, I think?
In Intrepid (kernel 2.6.27-9-generic) the player mounts automatically,
but still has problems.
Once mounted, any attempt to access the player (read or write) generates
vast numbers of errors. Behaviour is identical on two brand new players
and they do not appear to have any issues operating in Windows XP, so
this is 'normal behaviour' for the device, not a faulty unit.
Dec 12 18:56:33 mbeki kernel: [ 1082.635238] sd 3:0:0:0: [sdb] Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
Dec 12 18:56:33 mbeki kernel: [ 1082.635276] lost page write due to I/O error
on sdb
Dec 12 18:56:34 mbeki kernel: [ 1084.370637] sd 3:0:0:0: [sdb] Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
Dec 12 18:56:34 mbeki kernel: [ 1084.370673] lost page write due to I/O error
on sdb
Dec 12 18:56:36 mbeki kernel: [ 1086.478143] sd 3:0:0:0: [sdb] Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
Dec 12 18:56:36 mbeki kernel: [ 1086.478178] lost page write due to I/O error
on sdb
Dec 12 18:56:38 mbeki kernel: [ 1088.207851] sd 3:0:0:0: [sdb] Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
Dec 12 18:56:38 mbeki kernel: [ 1088.207886] lost page write due to I/O error
on sdb
Dec 12 18:56:40 mbeki kernel: [ 1090.463068] sd 3:0:0:0: [sdb] Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
Dec 12 18:56:40 mbeki kernel: [ 1090.463106] lost page write due to I/O error
on sdb
dmesg says;
[ 1058.628111] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 1063.797543] usb 1-3: configuration #1 chosen from 1 choice
[ 1063.821696] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1063.825898] usb-storage: device found at 4
[ 1063.825907] usb-storage: waiting for device to settle before scanning
[ 1068.824559] usb-storage: device scan complete
[ 1068.825783] scsi 3:0:0:0: Direct-Access Anyka PMP2501 Opn Disk
PQ: 0 ANSI: 2
[ 1068.826964] scsi 3:0:0:1: Direct-Access Anyka PMP2501 SD & MMC
PQ: 0 ANSI: 2
[ 1068.848999] sd 3:0:0:0: [sdb] 2054912 2048-byte hardware sectors (4208 MB)
[ 1068.850137] sd 3:0:0:0: [sdb] Write Protect is off
[ 1068.850148] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 1068.850154] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1068.870402] sd 3:0:0:0: [sdb] 2054912 2048-byte hardware sectors (4208 MB)
[ 1068.871682] sd 3:0:0:0: [sdb] Write Protect is off
[ 1068.871693] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 1068.871699] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1068.872679] sdb:
[ 1068.881414] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1068.882103] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1068.887491] sd 3:0:0:1: [sdc] Attached SCSI removable disk
[ 1068.888343] sd 3:0:0:1: Attached scsi generic sg3 type 0
[ 1082.635238] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_RETRY
[ 1082.635258] end_request: I/O error, dev sdb, sector 4
[ 1082.635270] Buffer I/O error on device sdb, logical block 1
[ 1082.635276] lost page write due to I/O error on sdb
[ 1084.370637] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_RETRY
[ 1084.370656] end_request: I/O error, dev sdb, sector 1560
[ 1084.370667] Buffer I/O error on device sdb, logical block 390
[ 1084.370673] lost page write due to I/O error on sdb
[ 1086.478143] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_RETRY
[ 1086.478162] end_request: I/O error, dev sdb, sector 3568
[ 1086.478173] Buffer I/O error on device sdb, logical block 892
[ 1086.478178] lost page write due to I/O error on sdb
[ 1088.207851] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_RETRY
[ 1088.207869] end_request: I/O error, dev sdb, sector 51568
[ 1088.207881] Buffer I/O error on device sdb, logical block 12892
[ 1088.207886] lost page write due to I/O error on sdb
[ 1090.463068] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_RETRY
[ 1090.463088] end_request: I/O error, dev sdb, sector 4
[ 1090.463100] Buffer I/O error on device sdb, logical block 1
[ 1090.463106] lost page write due to I/O error on sdb
[ 1092.204955] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_RETRY
[ 1092.204973] end_request: I/O error, dev sdb, sector 1560
[ 1092.204986] Buffer I/O error on device sdb, logical block 390
[ 1092.204991] lost page write due to I/O error on sdb
[ 1094.311956] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_RETRY
[ 1094.311974] end_request: I/O error, dev sdb, sector 3568
[ 1094.311985] Buffer I/O error on device sdb, logical block 892
[ 1094.311990] lost page write due to I/O error on sdb
[ 1096.052210] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_RETRY
[ 1096.052229] end_request: I/O error, dev sdb, sector 51568
[ 1096.052239] Buffer I/O error on device sdb, logical block 12892
[ 1096.052245] lost page write due to I/O error on sdb
[ 1107.658383] usb 1-3: USB disconnect, address 4
z...@mbeki:~$ uname -a
Linux mbeki 2.6.27-9-generic #1 SMP Thu Nov 20 22:15:32 UTC 2008 x86_64
GNU/Linux
r...@mbeki:~# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 8.10
Release: 8.10
Codename: intrepid
r...@mbeki:~# lsusb -v
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.27-9-generic ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:03.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.27-9-generic ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:03.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 005: ID 115e:0003
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x115e
idProduct 0x0003
bcdDevice 1.00
iManufacturer 5 A55A55A55A55
iProduct 2 A55A55A55A55
iSerial 3 A55A55A55A55
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 400mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 4 A55A55A55A55
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
can't get device qualifier: Connection timed out
can't get debug descriptor: Connection timed out
cannot read device status, Connection timed out (110)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.27-9-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:03.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
r...@mbeki:~#
Let me know if there's any other info I can provide. I really _hate_ having to
boot into 'doze for something that ought to be supported in linux!
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
USB issues with MP4 player (anyka pmp2501 4GB)
https://bugs.launchpad.net/bugs/307363
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
