Public bug reported: The scanner function of this multi-function device is detected and listed in lsusb:
Bus 008 Device 016: ID 04b8:082e Seiko Epson Corp. 0x082e DX-60x0 MFP scanner However xsane reports the device is not available. After adding it to epson.conf in /etc/sane.d, and restarting udev, it worked as expected. To get it working: 1) gksudo gedit /etc/sane.d/epson.conf Add this to the last line: usb 0x04b8 0x082e 2) Restart the udev service or reboot: sudo /etc/init.d/udev restart 3) Unplug and replug the scanner. This looks similar to Bug # 184230, minus the udev rules files (not needed in this case, probably a fix recently introduced). The sane project lists this scanner as supported with the sane-epson2 backend: http://www.sane-project.org/sane-mfgs.html#Z-EPSON Product page @ epson.com: http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oid=63059192 ** Affects: sane-backends (Ubuntu) Importance: Undecided Status: New -- Scanner in Epson CX-6000 multi-function detected but not available https://bugs.launchpad.net/bugs/314485 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
