Looks like it has not been fixed upstream. I'm currently using jaunty
and the drivers from https://launchpad.net/~xorg-edgers/+archive and
despite TV_FORMAT being set to PAL the picture is still grayscale.
xserver-xorg-video-intel: 2:2.6.99.1+git20090102.1f61e979-0ubuntu0tormod
xrandr --verbose
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1024 x 1024
VGA disconnected (normal left inverted right x axis y axis)
Identifier: 0x3b
Timestamp: 6427404
Subpixel: unknown
Clones:
CRTCs: 0 1
LVDS connected 1024x768+0+0 (0x3e) normal (normal left inverted right x axis y
axis) 0mm x 0mm
Identifier: 0x3c
Timestamp: 6427404
Subpixel: horizontal rgb
Clones:
CRTC: 1
CRTCs: 1
PANEL_FITTING: full_aspect
supported: center full_aspect full
BACKLIGHT_CONTROL: kernel
supported: native legacy combination kernel
BACKLIGHT: 7 (0x00000007) range: (0,7)
1024x768 (0x3e) 65.0MHz *current +preferred
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
TV disconnected 1024x768+0+0 (0x85) normal (normal left inverted right x axis y
axis) 0mm x 0mm
Identifier: 0x3d
Timestamp: 6427404
Subpixel: unknown
Clones:
CRTC: 0
CRTCs: 0 1
BOTTOM: 37 (0x00000025) range: (0,100)
RIGHT: 30 (0x0000001e) range: (0,100)
TOP: 24 (0x00000018) range: (0,100)
LEFT: 54 (0x00000036) range: (0,100)
TV_FORMAT: PAL
supported: NTSC-M NTSC-443 NTSC-J PAL-M
PAL-N PAL
1024x768 (0x85) 22.4MHz
h: width 1024 start 1025 end 1088 total 1120 skew 0 clock 20.0KHz
v: height 768 start 769 end 800 total 801 clock 25.0Hz
--
[i915] Can't set TV_FORMAT anymore using xrandr (Fixed upstream)
https://bugs.launchpad.net/bugs/246802
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
