Below is dmesg full text , also note that send error reports in ubuntu 9.04 seems still broken , it fails to send with a error message
[ 0.000000] BIOS EBDA/lowmem at: 0009b800/0009b800 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-4-generic (bui...@crested) (gcc version 4.3.3 20090111 (prerelease) (Ubuntu 4.3.2-2ubuntu11) ) #11-Ubuntu SMP Fri Jan 16 21:50:52 UTC 2009 (Ubuntu 2.6.28-4.11-generic) [ 0.000000] Command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/custom.seed boot=casper initrd=/casper/initrd.gz quiet splash -- BOOT_IMAGE=/casper/vmlinuz [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afef0000 (usable) [ 0.000000] BIOS-e820: 00000000afef0000 - 00000000afef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afef3000 - 00000000aff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000250000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x250000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xafef0 max_arch_pfn = 0x3ffffffff [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009b800 (usable) [ 0.000000] modified: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000afef0000 (usable) [ 0.000000] modified: 00000000afef0000 - 00000000afef3000 (ACPI NVS) [ 0.000000] modified: 00000000afef3000 - 00000000aff00000 (ACPI data) [ 0.000000] modified: 00000000d0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000250000000 (usable) [ 0.000000] init_memory_mapping: 0000000000000000-00000000afef0000 [ 0.000000] 0000000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00afef0000 page 4k [ 0.000000] kernel direct mapping tables up to afef0000 @ 10000-15000 [ 0.000000] last_map_addr: afef0000 end: afef0000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000250000000 [ 0.000000] 0100000000 - 0250000000 page 2M [ 0.000000] kernel direct mapping tables up to 250000000 @ 13000-1e000 [ 0.000000] last_map_addr: 250000000 end: 250000000 [ 0.000000] RAMDISK: 7f7d5000 - 7ffff1c0 [ 0.000000] ACPI: RSDP 000F8430, 0014 (r0 EVGA ) [ 0.000000] ACPI: RSDT AFEF3040, 0038 (r1 EVGA NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: FACP AFEF30C0, 0074 (r1 EVGA NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: DSDT AFEF3180, 52B3 (r1 EVGA NVDAACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS AFEF0000, 0040 [ 0.000000] ACPI: HPET AFEF8580, 0038 (r1 EVGA NVDAACPI 42302E31 NVDA 98) [ 0.000000] ACPI: WDRT AFEF8600, 0047 (r1 EVGA NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: MCFG AFEF86C0, 003C (r1 EVGA NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: APIC AFEF8480, 0098 (r1 EVGA NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0250000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000b5b3b0] TEXT DATA BSS ==> [0000200000 - 0000b5b3b0] [ 0.000000] #3 [007f7d5000 - 007ffff1c0] RAMDISK ==> [007f7d5000 - 007ffff1c0] [ 0.000000] #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000] [ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #6 [0000013000 - 0000019000] PGTABLE ==> [0000013000 - 0000019000] [ 0.000000] found SMP MP-table at [ffff8800000f4460] 000f4460 [ 0.000000] [ffffe20000000000-ffffe200081fffff] PMD -> [ffff880028200000-ffff8800303fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00250000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x000afef0 [ 0.000000] 0: 0x00100000 -> 0x00250000 [ 0.000000] On node 0 totalpages: 2096763 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2509 pages reserved [ 0.000000] DMA zone: 1414 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 702248 pages, LIFO batch:31 [ 0.000000] Normal zone: 18816 pages used for memmap [ 0.000000] Normal zone: 1357440 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000afef0000 - 00000000afef3000 [ 0.000000] PM: Registered nosave memory: 00000000afef3000 - 00000000aff00000 [ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: aff00000:20100000) [ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061102 [ 0.000000] Kernel command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/custom.seed boot=casper initrd=/casper/initrd.gz quiet splash -- BOOT_IMAGE=/casper/vmlinuz [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2499.854 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] allocated 96993280 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.004000] Memory: 8061444k/9699328k available (4635k kernel code, 1312276k absent, 324620k reserved, 2512k data, 528k init) [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.70 BogoMIPS (lpj=9999416) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] ACPI: Core revision 20080926 [ 0.004000] ACPI: Checking initramfs for custom DSDT [ 0.295479] Setting APIC routing to flat [ 0.295915] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.335607] CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.336001] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4999.96 BogoMIPS (lpj=9999938) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.420474] CPU1: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.420492] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.424072] Booting processor 2 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 4999.93 BogoMIPS (lpj=9999869) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.512503] CPU2: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.512520] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.516073] Booting processor 3 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 4999.91 BogoMIPS (lpj=9999822) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.604532] CPU3: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.604558] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.608038] Brought up 4 CPUs [ 0.608039] Total of 4 processors activated (19999.52 BogoMIPS). [ 0.608109] CPU0 attaching sched-domain: [ 0.608111] domain 0: span 0,3 level MC [ 0.608113] groups: 0 3 [ 0.608116] domain 1: span 0-3 level CPU [ 0.608117] groups: 0,3 1-2 [ 0.608120] CPU1 attaching sched-domain: [ 0.608121] domain 0: span 1-2 level MC [ 0.608123] groups: 1 2 [ 0.608125] domain 1: span 0-3 level CPU [ 0.608126] groups: 1-2 0,3 [ 0.608129] CPU2 attaching sched-domain: [ 0.608130] domain 0: span 1-2 level MC [ 0.608131] groups: 2 1 [ 0.608133] domain 1: span 0-3 level CPU [ 0.608134] groups: 1-2 0,3 [ 0.608137] CPU3 attaching sched-domain: [ 0.608138] domain 0: span 0,3 level MC [ 0.608140] groups: 3 0 [ 0.608142] domain 1: span 0-3 level CPU [ 0.608143] groups: 0,3 1-2 [ 0.608245] net_namespace: 1400 bytes [ 0.608245] Booting paravirtualized kernel on bare hardware [ 0.608245] Time: 10:53:45 Date: 01/20/09 [ 0.608245] regulator: core version 0.5 [ 0.608245] NET: Registered protocol family 16 [ 0.608245] ACPI: bus type pci registered [ 0.608245] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.608245] PCI: MCFG area at e0000000 reserved in E820 [ 0.618243] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.618244] PCI: Using configuration type 1 for base access [ 0.624208] ACPI: EC: Look up EC in DSDT [ 0.630348] ACPI: Interpreter enabled [ 0.630350] ACPI: (supports S0 S3 S4 S5) [ 0.630365] ACPI: Using IOAPIC for interrupt routing [ 0.640139] ACPI: No dock devices found. [ 0.640149] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.640643] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.640646] pci 0000:00:02.0: PME# disabled [ 0.640716] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.640720] pci 0000:00:04.0: PME# disabled [ 0.640894] pci 0000:00:0a.0: reg 10 io port: [0xfc00-0xfc7f] [ 0.640938] pci 0000:00:0a.1: reg 10 io port: [0xf800-0xf83f] [ 0.640952] pci 0000:00:0a.1: reg 20 io port: [0xf400-0xf43f] [ 0.640957] pci 0000:00:0a.1: reg 24 io port: [0xf000-0xf03f] [ 0.640968] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.640973] pci 0000:00:0a.1: PME# disabled [ 0.641001] pci 0000:00:0b.0: reg 10 32bit mmio: [0xcffff000-0xcfffffff] [ 0.641022] pci 0000:00:0b.0: supports D1 D2 [ 0.641023] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.641026] pci 0000:00:0b.0: PME# disabled [ 0.641049] pci 0000:00:0b.1: reg 10 32bit mmio: [0xcfffe000-0xcfffe0ff] [ 0.641070] pci 0000:00:0b.1: supports D1 D2 [ 0.641071] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.641074] pci 0000:00:0b.1: PME# disabled [ 0.641108] pci 0000:00:0d.0: reg 20 io port: [0xec00-0xec0f] [ 0.641142] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.641146] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.641149] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.641153] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.641156] pci 0000:00:0e.0: reg 20 io port: [0xd800-0xd80f] [ 0.641160] pci 0000:00:0e.0: reg 24 32bit mmio: [0xcfffd000-0xcfffdfff] [ 0.641194] pci 0000:00:0e.1: reg 10 io port: [0x9e0-0x9e7] [ 0.641197] pci 0000:00:0e.1: reg 14 io port: [0xbe0-0xbe3] [ 0.641201] pci 0000:00:0e.1: reg 18 io port: [0x960-0x967] [ 0.641205] pci 0000:00:0e.1: reg 1c io port: [0xb60-0xb63] [ 0.641208] pci 0000:00:0e.1: reg 20 io port: [0xc400-0xc40f] [ 0.641212] pci 0000:00:0e.1: reg 24 32bit mmio: [0xcfffc000-0xcfffcfff] [ 0.641246] pci 0000:00:0e.2: reg 10 io port: [0xc000-0xc007] [ 0.641249] pci 0000:00:0e.2: reg 14 io port: [0xbc00-0xbc03] [ 0.641253] pci 0000:00:0e.2: reg 18 io port: [0xb800-0xb807] [ 0.641257] pci 0000:00:0e.2: reg 1c io port: [0xb400-0xb403] [ 0.641260] pci 0000:00:0e.2: reg 20 io port: [0xb000-0xb00f] [ 0.641264] pci 0000:00:0e.2: reg 24 32bit mmio: [0xcfffb000-0xcfffbfff] [ 0.641332] pci 0000:00:0f.1: reg 10 32bit mmio: [0xcfff0000-0xcfff3fff] [ 0.641354] pci 0000:00:0f.1: PME# supported from D3hot D3cold [ 0.641356] pci 0000:00:0f.1: PME# disabled [ 0.641399] pci 0000:00:11.0: reg 10 32bit mmio: [0xcfffa000-0xcfffafff] [ 0.641403] pci 0000:00:11.0: reg 14 io port: [0xac00-0xac07] [ 0.641406] pci 0000:00:11.0: reg 18 32bit mmio: [0xcfff9000-0xcfff90ff] [ 0.641410] pci 0000:00:11.0: reg 1c 32bit mmio: [0xcfff8000-0xcfff800f] [ 0.641424] pci 0000:00:11.0: supports D1 D2 [ 0.641425] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.641429] pci 0000:00:11.0: PME# disabled [ 0.641466] pci 0000:00:12.0: reg 10 32bit mmio: [0xcfff7000-0xcfff7fff] [ 0.641470] pci 0000:00:12.0: reg 14 io port: [0xa800-0xa807] [ 0.641474] pci 0000:00:12.0: reg 18 32bit mmio: [0xcfff6000-0xcfff60ff] [ 0.641477] pci 0000:00:12.0: reg 1c 32bit mmio: [0xcfff5000-0xcfff500f] [ 0.641491] pci 0000:00:12.0: supports D1 D2 [ 0.641492] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.641496] pci 0000:00:12.0: PME# disabled [ 0.641540] pci 0000:01:00.0: reg 10 32bit mmio: [0xcc000000-0xccffffff] [ 0.641547] pci 0000:01:00.0: reg 14 64bit mmio: [0xb0000000-0xbfffffff] [ 0.641554] pci 0000:01:00.0: reg 1c 64bit mmio: [0xca000000-0xcbffffff] [ 0.641558] pci 0000:01:00.0: reg 24 io port: [0x9c00-0x9c7f] [ 0.641562] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.641609] pci 0000:00:02.0: bridge io port: [0x9000-0x9fff] [ 0.641612] pci 0000:00:02.0: bridge 32bit mmio: [0xca000000-0xcdffffff] [ 0.641618] pci 0000:00:02.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.641695] pci 0000:03:07.0: reg 10 32bit mmio: [0xcfeff000-0xcfeff7ff] [ 0.641700] pci 0000:03:07.0: reg 14 32bit mmio: [0xcfef8000-0xcfefbfff] [ 0.641725] pci 0000:03:07.0: supports D1 D2 [ 0.641726] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot [ 0.641729] pci 0000:03:07.0: PME# disabled [ 0.641747] pci 0000:03:0a.0: reg 10 32bit mmio: [0xcfefc000-0xcfefdfff] [ 0.641792] pci 0000:00:0f.0: transparent bridge [ 0.641795] pci 0000:00:0f.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff] [ 0.641809] bus 00 -> node 0 [ 0.641814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.642292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.700125] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.700275] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.700416] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 0.700558] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 0.700698] ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 10 *11 14 15) [ 0.700836] ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.700976] ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 10 *11 14 15) [ 0.701114] ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.701254] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.701393] ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15) [ 0.701532] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.701678] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 0.701816] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.701956] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.702094] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.702234] ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 9 *10 11 14 15) [ 0.702379] ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 9 10 *11 14 15) [ 0.702518] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) [ 0.702693] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.702861] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.703027] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.703196] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.703363] ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0 [ 0.703528] ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled. [ 0.704121] ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0 [ 0.704288] ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0, disabled. [ 0.704454] ACPI: PCI Interrupt Link [AUBA] (IRQs 22 23) *0 [ 0.704645] ACPI: PCI Interrupt Link [AMA1] (IRQs 22 23) *0 [ 0.704812] ACPI: PCI Interrupt Link [AMAC] (IRQs 22 23) *0 [ 0.704979] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0 [ 0.705145] ACPI: PCI Interrupt Link [AACI] (IRQs 22 23) *0, disabled. [ 0.705312] ACPI: PCI Interrupt Link [AMCI] (IRQs 22 23) *0, disabled. [ 0.705479] ACPI: PCI Interrupt Link [ASMB] (IRQs 22 23) *0, disabled. [ 0.705647] ACPI: PCI Interrupt Link [AUS2] (IRQs 22 23) *0 [ 0.705818] ACPI: PCI Interrupt Link [AIDE] (IRQs 22 23) *0, disabled. [ 0.705985] ACPI: PCI Interrupt Link [ASA0] (IRQs 20 21) *0 [ 0.706151] ACPI: PCI Interrupt Link [ASA1] (IRQs 20 21) *0 [ 0.706317] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21) *0 [ 0.706371] ACPI: WMI: Mapper loaded [ 0.706371] SCSI subsystem initialized [ 0.706371] libata version 3.00 loaded. [ 0.706371] usbcore: registered new interface driver usbfs [ 0.706371] usbcore: registered new interface driver hub [ 0.706371] usbcore: registered new device driver usb [ 0.708030] PCI: Using ACPI for IRQ routing [ 0.724010] Bluetooth: Core ver 2.13 [ 0.724024] NET: Registered protocol family 31 [ 0.724024] Bluetooth: HCI device and connection manager initialized [ 0.724024] Bluetooth: HCI socket layer initialized [ 0.724024] NET: Registered protocol family 8 [ 0.724024] NET: Registered protocol family 20 [ 0.724032] NetLabel: Initializing [ 0.724032] NetLabel: domain hash size = 128 [ 0.724032] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.724032] NetLabel: unlabeled traffic allowed by default [ 0.724047] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.724050] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.732053] AppArmor: AppArmor Filesystem Enabled [ 0.736008] Switched to high resolution mode on CPU 0 [ 0.736557] Switched to high resolution mode on CPU 1 [ 0.736582] Switched to high resolution mode on CPU 2 [ 0.736590] Switched to high resolution mode on CPU 3 [ 0.744009] pnp: PnP ACPI init [ 0.744017] ACPI: bus type pnp registered [ 0.747922] pnp: PnP ACPI: found 13 devices [ 0.747923] ACPI: ACPI bus type pnp unregistered [ 0.747930] system 00:00: ioport range 0x1000-0x107f has been reserved [ 0.747931] system 00:00: ioport range 0x1080-0x10ff has been reserved [ 0.747933] system 00:00: ioport range 0x1400-0x147f has been reserved [ 0.747935] system 00:00: ioport range 0x1480-0x14ff has been reserved [ 0.747936] system 00:00: ioport range 0x1800-0x187f has been reserved [ 0.747938] system 00:00: ioport range 0x1880-0x18ff has been reserved [ 0.747942] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.747944] system 00:02: ioport range 0x295-0x314 has been reserved [ 0.747945] system 00:02: ioport range 0x880-0x88f has been reserved [ 0.747951] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.747955] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved [ 0.747956] system 00:0c: iomem range 0xd5800-0xd7fff has been reserved [ 0.747958] system 00:0c: iomem range 0xf0000-0xfbfff could not be reserved [ 0.747960] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.747961] system 00:0c: iomem range 0xafef0000-0xafefffff could not be reserved [ 0.747963] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.747965] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.747966] system 00:0c: iomem range 0x100000-0xafeeffff could not be reserved [ 0.747968] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.747969] system 00:0c: iomem range 0xd0000000-0xdfffffff has been reserved [ 0.747971] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.747973] system 00:0c: iomem range 0xfeff0000-0xfeff0000 has been reserved [ 0.753504] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.753507] pci 0000:00:02.0: IO window: 0x9000-0x9fff [ 0.753512] pci 0000:00:02.0: MEM window: 0xca000000-0xcdffffff [ 0.753515] pci 0000:00:02.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff [ 0.753520] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.753521] pci 0000:00:04.0: IO window: disabled [ 0.753525] pci 0000:00:04.0: MEM window: disabled [ 0.753528] pci 0000:00:04.0: PREFETCH window: disabled [ 0.753533] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:03 [ 0.753534] pci 0000:00:0f.0: IO window: disabled [ 0.753537] pci 0000:00:0f.0: MEM window: 0xcfe00000-0xcfefffff [ 0.753539] pci 0000:00:0f.0: PREFETCH window: disabled [ 0.753796] ACPI: PCI Interrupt Link [AXV5] enabled at IRQ 16 [ 0.753800] pci 0000:00:02.0: PCI INT A -> Link[AXV5] -> GSI 16 (level, low) -> IRQ 16 [ 0.753804] pci 0000:00:02.0: setting latency timer to 64 [ 0.754049] ACPI: PCI Interrupt Link [AXV6] enabled at IRQ 16 [ 0.754051] pci 0000:00:04.0: PCI INT A -> Link[AXV6] -> GSI 16 (level, low) -> IRQ 16 [ 0.754056] pci 0000:00:04.0: setting latency timer to 64 [ 0.754060] pci 0000:00:0f.0: setting latency timer to 64 [ 0.754063] bus: 00 index 0 io port: [0x00-0xffff] [ 0.754064] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.754065] bus: 01 index 0 io port: [0x9000-0x9fff] [ 0.754067] bus: 01 index 1 mmio: [0xca000000-0xcdffffff] [ 0.754068] bus: 01 index 2 mmio: [0xb0000000-0xbfffffff] [ 0.754069] bus: 01 index 3 mmio: [0x0-0x0] [ 0.754070] bus: 02 index 0 mmio: [0x0-0x0] [ 0.754071] bus: 02 index 1 mmio: [0x0-0x0] [ 0.754072] bus: 02 index 2 mmio: [0x0-0x0] [ 0.754073] bus: 02 index 3 mmio: [0x0-0x0] [ 0.754075] bus: 03 index 0 mmio: [0x0-0x0] [ 0.754076] bus: 03 index 1 mmio: [0xcfe00000-0xcfefffff] [ 0.754077] bus: 03 index 2 mmio: [0x0-0x0] [ 0.754078] bus: 03 index 3 io port: [0x00-0xffff] [ 0.754079] bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.754086] NET: Registered protocol family 2 [ 0.796055] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.796651] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.798108] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.798548] TCP: Hash tables configured (established 262144 bind 65536) [ 0.798550] TCP reno registered [ 0.808116] NET: Registered protocol family 1 [ 0.808209] checking if image is initramfs... it is [ 1.397676] Freeing initrd memory: 8360k freed [ 1.401820] audit: initializing netlink socket (disabled) [ 1.401842] type=2000 audit(1232448825.400:1): initialized [ 1.408706] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.412507] VFS: Disk quotas dquot_6.5.1 [ 1.412607] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.413931] msgmni has been set to 15763 [ 1.414188] alg: No test for stdrng (krng) [ 1.414205] io scheduler noop registered [ 1.414211] io scheduler anticipatory registered [ 1.414212] io scheduler deadline registered [ 1.414286] io scheduler cfq registered (default) [ 1.414417] pci 0000:00:02.0: Disabling HT MSI mapping<6>pci 0000:00:04.0: Disabling HT MSI mapping<6>pci 0000:00:09.0: Disabling HT MSI mapping<6>pci 0000:00:0e.0: Disabling HT MSI mapping<6>pci 0000:00:0e.1: Disabling HT MSI mapping<6>pci 0000:00:0e.2: Disabling HT MSI mapping<6>pci 0000:00:0f.0: Disabling HT MSI mapping<6>pci 0000:00:0f.1: Disabling HT MSI mapping<6>pci 0000:00:11.0: Disabling HT MSI mapping<6>pci 0000:00:12.0: Disabling HT MSI mapping<7>pci 0000:01:00.0: Boot video device [ 1.433925] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 1.433984] pcieport-driver 0000:00:02.0: found MSI capability [ 1.434016] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X [ 1.434028] pci_express 0000:00:02.0:pcie00: allocate port service [ 1.434141] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 1.434199] pcieport-driver 0000:00:04.0: found MSI capability [ 1.434228] pcieport-driver 0000:00:04.0: irq 2302 for MSI/MSI-X [ 1.434240] pci_express 0000:00:04.0:pcie00: allocate port service [ 1.434436] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.434485] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.434816] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.434818] ACPI: Power Button (FF) [PWRF] [ 1.434893] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.434895] ACPI: Power Button (CM) [PWRB] [ 1.435429] processor ACPI_CPU:00: registered as cooling_device0 [ 1.435433] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.435506] processor ACPI_CPU:01: registered as cooling_device1 [ 1.435577] processor ACPI_CPU:02: registered as cooling_device2 [ 1.435646] processor ACPI_CPU:03: registered as cooling_device3 [ 1.472334] Linux agpgart interface v0.103 [ 1.472337] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.472490] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.473128] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.475890] brd: module loaded [ 1.477152] loop: module loaded [ 1.477523] Fixed MDIO Bus: probed [ 1.477526] PPP generic driver version 2.4.2 [ 1.477764] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.477848] Driver 'sd' needs updating - please use bus_type methods [ 1.477919] Driver 'sr' needs updating - please use bus_type methods [ 1.478910] sata_nv 0000:00:0e.0: version 3.5 [ 1.479174] ACPI: PCI Interrupt Link [ASA0] enabled at IRQ 21 [ 1.479179] sata_nv 0000:00:0e.0: PCI INT A -> Link[ASA0] -> GSI 21 (level, low) -> IRQ 21 [ 1.479181] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.479395] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.479486] scsi0 : sata_nv [ 1.479675] scsi1 : sata_nv [ 1.479923] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21 [ 1.479925] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21 [ 2.100287] ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 20 [ 2.100291] sata_nv 0000:00:0e.1: PCI INT B -> Link[ASA1] -> GSI 20 (level, low) -> IRQ 20 [ 2.100292] sata_nv 0000:00:0e.1: Using SWNCQ mode [ 2.100315] sata_nv 0000:00:0e.1: setting latency timer to 64 [ 2.100422] scsi2 : sata_nv [ 2.100631] scsi3 : sata_nv [ 2.100883] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20 [ 2.100885] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20 [ 2.568034] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.848344] ata3.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133 [ 2.848346] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.856623] ata3.00: configured for UDMA/133 [ 3.168086] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5 [ 3.168344] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 3.168355] sd 2:0:0:0: [sda] Write Protect is off [ 3.168357] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.168375] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.168416] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 3.168426] sd 2:0:0:0: [sda] Write Protect is off [ 3.168427] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.168445] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.168447] sda: sda1 sda2 < sda5 > [ 3.192789] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.192946] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.193217] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 3.193220] sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 3.193222] sata_nv 0000:00:0e.2: Using SWNCQ mode [ 3.193246] sata_nv 0000:00:0e.2: setting latency timer to 64 [ 3.193343] scsi4 : sata_nv [ 3.193543] scsi5 : sata_nv [ 3.193792] ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb000 irq 21 [ 3.193794] ata6: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 21 [ 3.816358] pata_amd 0000:00:0d.0: version 0.3.10 [ 3.816380] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 3.816457] scsi6 : pata_amd [ 3.816663] scsi7 : pata_amd [ 3.817278] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xec00 irq 14 [ 3.817280] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xec08 irq 15 [ 3.980353] ata7.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.05, max UDMA/66 [ 3.980368] ata7: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13) [ 3.996296] ata7.00: configured for UDMA/66 [ 3.997407] ata8: port disabled. ignoring. [ 3.998715] scsi 6:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.05 PQ: 0 ANSI: 5 [ 4.002783] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.002786] Uniform CD-ROM driver Revision: 3.20 [ 4.002951] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 4.003068] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 4.005221] usbcore: registered new interface driver libusual [ 4.005364] usbcore: registered new interface driver usbserial [ 4.005432] USB Serial support registered for generic [ 4.005500] usbcore: registered new interface driver usbserial_generic [ 4.005505] usbserial: USB Serial Driver core [ 4.005653] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 4.005654] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 4.006246] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.020099] mice: PS/2 mouse device common for all mice [ 4.056149] rtc_cmos 00:05: RTC can wake from S4 [ 4.056222] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 4.056250] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 4.056384] device-mapper: uevent: version 1.0.3 [ 4.056565] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected] [ 4.056806] device-mapper: multipath: version 1.0.5 loaded [ 4.056812] device-mapper: multipath round-robin: version 1.0.0 loaded [ 4.057050] cpuidle: using governor ladder [ 4.057051] cpuidle: using governor menu [ 4.057376] TCP cubic registered [ 4.057440] NET: Registered protocol family 10 [ 4.057718] lo: Disabled Privacy Extensions [ 4.057916] NET: Registered protocol family 17 [ 4.057950] Bluetooth: L2CAP ver 2.11 [ 4.057951] Bluetooth: L2CAP socket layer initialized [ 4.057953] Bluetooth: SCO (Voice Link) ver 0.6 [ 4.057954] Bluetooth: SCO socket layer initialized [ 4.057969] Bluetooth: RFCOMM socket layer initialized [ 4.057974] Bluetooth: RFCOMM TTY layer initialized [ 4.057975] Bluetooth: RFCOMM ver 1.10 [ 4.058094] registered taskstats version 1 [ 4.058208] Magic number: 9:868:881 [ 4.058282] rtc_cmos 00:05: setting system clock to 2009-01-20 10:53:48 UTC (1232448828) [ 4.058290] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.058291] EDD information not available. [ 4.058315] Freeing unused kernel memory: 528k freed [ 4.058458] Write protecting the kernel read-only data: 6556k [ 4.084062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 4.153625] fuse init (API version 7.10) [ 4.248082] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.248400] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 4.248407] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 4.248428] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 4.248431] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 4.248534] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 4.248560] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xcffff000 [ 4.254386] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.254388] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 4.281080] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 4.281087] b43-pci-bridge 0000:03:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 4.284471] ssb: Sonics Silicon Backplane found on PCI device 0000:03:0a.0 [ 4.286645] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 4.286650] ohci1394 0000:03:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 4.306571] usb usb1: configuration #1 chosen from 1 choice [ 4.306591] hub 1-0:1.0: USB hub found [ 4.306600] hub 1-0:1.0: 10 ports detected [ 4.307000] ACPI: PCI Interrupt Link [AUS2] enabled at IRQ 22 [ 4.307006] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[AUS2] -> GSI 22 (level, low) -> IRQ 22 [ 4.307021] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 4.307023] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 4.307089] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 4.307116] ehci_hcd 0000:00:0b.1: debug port 1 [ 4.307121] ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported [ 4.307135] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xcfffe000 [ 4.317517] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 4.317576] usb usb2: configuration #1 chosen from 1 choice [ 4.317599] hub 2-0:1.0: USB hub found [ 4.317605] hub 2-0:1.0: 10 ports detected [ 4.317960] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 4.318245] ACPI: PCI Interrupt Link [AMAC] enabled at IRQ 23 [ 4.318248] forcedeth 0000:00:11.0: PCI INT A -> Link[AMAC] -> GSI 23 (level, low) -> IRQ 23 [ 4.318252] forcedeth 0000:00:11.0: setting latency timer to 64 [ 4.318285] nv_probe: set workaround bit for reversed mac addr [ 4.335638] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[cfeff000-cfeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.382738] forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:1f:bc:00:54:64 [ 4.382742] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 4.383038] ACPI: PCI Interrupt Link [AMA1] enabled at IRQ 22 [ 4.383041] forcedeth 0000:00:12.0: PCI INT A -> Link[AMA1] -> GSI 22 (level, low) -> IRQ 22 [ 4.383044] forcedeth 0000:00:12.0: setting latency timer to 64 [ 4.383079] nv_probe: set workaround bit for reversed mac addr [ 4.446763] forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x732 @ 3, addr 00:1f:bc:00:54:65 [ 4.446766] forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 4.745009] usb 2-8: new high speed USB device using ehci_hcd and address 3 [ 4.885859] usb 2-8: configuration #1 chosen from 1 choice [ 4.889351] Initializing USB Mass Storage driver... [ 4.889470] scsi8 : SCSI emulation for USB Mass Storage devices [ 4.889571] usb-storage: device found at 3 [ 4.889573] usb-storage: waiting for device to settle before scanning [ 4.889582] usbcore: registered new interface driver usb-storage [ 4.889584] USB Mass Storage support registered. [ 5.188009] usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 5.292970] kjournald starting. Commit interval 5 seconds [ 5.292987] EXT3-fs: mounted filesystem with ordered data mode. [ 5.409634] usb 1-2: configuration #1 chosen from 1 choice [ 5.419285] usbcore: registered new interface driver hiddev [ 5.432520] input: Microsoft SideWinder? Mouse as /devices/pci0000:00/0000:00:0b.0/usb1/1-2/1-2:1.0/input/input4 [ 5.468046] generic-usb 0003:045E:0724.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft SideWinder? Mouse] on usb-0000:00:0b.0-2/input0 [ 5.468064] usbcore: registered new interface driver usbhid [ 5.468067] usbhid: v2.6:USB HID core driver [ 5.604098] ieee1394: Host added: ID:BUS[0-00:1023] GUID[808080070000044b] [ 6.358211] kjournald starting. Commit interval 5 seconds [ 6.358228] EXT3-fs: mounted filesystem with ordered data mode. [ 7.410232] kjournald starting. Commit interval 5 seconds [ 7.410240] EXT3-fs: mounted filesystem with ordered data mode. [ 8.464486] kjournald starting. Commit interval 5 seconds [ 8.464504] EXT3-fs: mounted filesystem with ordered data mode. [ 9.516447] kjournald starting. Commit interval 5 seconds [ 9.516464] EXT3-fs: mounted filesystem with ordered data mode. [ 9.888318] usb-storage: device scan complete [ 9.889680] scsi 8:0:0:0: Direct-Access Memorex TRAVELDRIVE 005B PMAP PQ: 0 ANSI: 0 CCS [ 9.890919] sd 8:0:0:0: [sdb] 8056832 512-byte hardware sectors: (4.12 GB/3.84 GiB) [ 9.891538] sd 8:0:0:0: [sdb] Write Protect is off [ 9.891541] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 9.891543] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 9.893187] sd 8:0:0:0: [sdb] 8056832 512-byte hardware sectors: (4.12 GB/3.84 GiB) [ 9.894537] sd 8:0:0:0: [sdb] Write Protect is off [ 9.894539] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 9.894541] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 9.894544] sdb: sdb1 [ 9.897096] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 9.897594] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 10.568926] kjournald starting. Commit interval 5 seconds [ 10.568943] EXT3-fs: mounted filesystem with ordered data mode. [ 10.693258] aufs 20080922 [ 10.704971] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 26.565217] udev: starting version 136 [ 27.168312] i2c-adapter i2c-0: nForce2 SMBus adapter at 0xf400 [ 27.168325] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf000 [ 27.175640] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 27.198650] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug? [ 27.198659] resource map sanity check conflict: 0xff000000 0xffffffff 0xffff0000 0xffffffff pnp 00:0c [ 27.198665] ------------[ cut here ]------------ [ 27.198667] WARNING: at /build/buildd/linux-2.6.28/arch/x86/mm/ioremap.c:226 __ioremap_caller+0x349/0x390() [ 27.198668] Modules linked in: ck804xrom(+) mtd joydev(+) chipreg pcspkr(+) map_funcs i2c_nforce2 squashfs aufs exportfs nls_iso8859_1 nls_cp437 vfat fat usbhid usb_storage ohci1394 ssb forcedeth ieee1394 ehci_hcd ohci_hcd fbcon tileblit font bitblit softcursor fuse [ 27.198682] Pid: 3399, comm: modprobe Not tainted 2.6.28-4-generic #11-Ubuntu [ 27.198683] Call Trace: [ 27.198687] [<ffffffff8024d83f>] warn_on_slowpath+0x5f/0x90 [ 27.198691] [<ffffffff8022c619>] ? default_spin_lock_flags+0x9/0x10 [ 27.198693] [<ffffffff8022c619>] ? default_spin_lock_flags+0x9/0x10 [ 27.198696] [<ffffffff80233bf9>] __ioremap_caller+0x349/0x390 [ 27.198699] [<ffffffffa017f2db>] ? ck804xrom_init_one+0x1ab/0x5c2 [ck804xrom] [ 27.198701] [<ffffffff80233d52>] ioremap_nocache+0x12/0x20 [ 27.198703] [<ffffffffa017f2db>] ck804xrom_init_one+0x1ab/0x5c2 [ck804xrom] [ 27.198706] [<ffffffffa0185041>] init_ck804xrom+0x41/0x59 [ck804xrom] [ 27.198709] [<ffffffffa0185000>] ? init_ck804xrom+0x0/0x59 [ck804xrom] [ 27.198711] [<ffffffff8020a03b>] do_one_initcall+0x3b/0x170 [ 27.198715] [<ffffffff802cc8cd>] ? __vunmap+0xcd/0x120 [ 27.198717] [<ffffffff802cc975>] ? vfree+0x25/0x30 [ 27.198720] [<ffffffff8027bbf8>] ? load_module+0x11c8/0x11d0 [ 27.198723] [<ffffffff8027bcad>] sys_init_module+0xad/0x1e0 [ 27.198725] [<ffffffff8021253a>] system_call_fastpath+0x16/0x1b [ 27.198727] ---[ end trace db843a4e82090d39 ]--- [ 27.249003] Found: SST 49LF080A [ 27.249006] ck804xrom @fff00000: Found 1 x8 devices at 0x0 in 8-bit bank [ 27.276539] cfg80211: Using static regulatory domain info [ 27.276541] cfg80211: Regulatory domain: US [ 27.276543] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.276544] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 27.276546] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 27.276547] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 27.276548] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 27.276550] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 27.276551] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 27.276553] cfg80211: Calling CRDA for country: US [ 27.278484] number of JEDEC chips: 1 [ 27.278486] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. [ 27.310843] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 27.310847] HDA Intel 0000:00:0f.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 27.310925] HDA Intel 0000:00:0f.1: setting latency timer to 64 [ 27.322892] b43-phy0: Broadcom 4306 WLAN found [ 27.368729] phy0: Selected rate control algorithm 'pid' [ 27.408359] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ] [ 27.700009] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 28.557664] lp: driver loaded but no devices found [ 28.588351] ppdev: user-space parallel port driver [ 29.339007] Adding 19800072k swap on /dev/sda5. Priority:-1 extents:1 across:19800072k [ 29.446501] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.467222] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 29.467382] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 29.467384] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 29.467385] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 29.514320] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 30.695286] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 31.812234] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 31.812237] vboxdrv: Successfully done. [ 31.812238] vboxdrv: Found 4 processor cores. [ 31.812291] VBoxDrv: dbg - g_abExecMemory=ffffffffa0419a80 [ 31.812359] vboxdrv: fAsync=0 offMin=0x195 offMax=0x5d75 [ 31.812396] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 31.812397] vboxdrv: Successfully loaded version 2.1.0 (interface 0x000a0008). [ 32.465634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 32.465636] Bluetooth: BNEP filters: protocol multicast [ 32.485400] Bridge firewalling registered [ 36.578012] forcedeth 0000:00:12.0: irq 2301 for MSI/MSI-X [ 36.578207] eth1: no link during initialization. [ 36.579683] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 36.581581] forcedeth 0000:00:11.0: irq 2300 for MSI/MSI-X [ 36.581773] eth0: no link during initialization. [ 36.583228] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.596669] input: b43-phy0 as /devices/virtual/input/input6 [ 36.672042] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 36.697450] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 36.736623] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 36.758155] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 36.924530] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 37.007647] Registered led device: b43-phy0::tx [ 37.007660] Registered led device: b43-phy0::rx [ 37.007674] Registered led device: b43-phy0::radio [ 37.025544] b43-phy0: Radio turned on by software [ 37.034879] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 55.421250] ggl-gtk[5609]: segfault at 0 ip 00007f4282739cd0 sp 00007fff96271970 error 4 in libggadget-dbus-1.0.so.0.0.0[7f428271f000+2b000] [ 100.589464] ggl-gtk[5797]: segfault at 0 ip 00007fac7010ccd0 sp 00007fff83c45020 error 4 in libggadget-dbus-1.0.so.0.0.0[7fac700f2000+2b000] [ 123.564262] wlan0: authenticate with AP 00:12:17:fa:3a:0b [ 123.565911] wlan0: authenticated [ 123.565914] wlan0: associate with AP 00:12:17:fa:3a:0b [ 123.569305] wlan0: RX AssocResp from 00:12:17:fa:3a:0b (capab=0x411 status=0 aid=5) [ 123.569307] wlan0: associated [ 123.570727] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 133.924008] wlan0: no IPv6 routers present [ 199.436010] ggl-gtk[6208]: segfault at 0 ip 00007fb32a153cd0 sp 00007fff3dc8c970 error 4 in libggadget-dbus-1.0.so.0.0.0[7fb32a139000+2b000] [ 244.012168] ggl-gtk[6536]: segfault at 0 ip 00007f35ca71bcd0 sp 00007fffde251f30 error 4 in libggadget-dbus-1.0.so.0.0.0[7f35ca701000+2b000] [ 256.147593] ggl-gtk[6575]: segfault at 0 ip 00007f4b690e4cd0 sp 00007fff7cc1b900 error 4 in libggadget-dbus-1.0.so.0.0.0[7f4b690ca000+2b000] [ 324.088418] ggl-gtk[6825]: segfault at 0 ip 00007f62b27a2cd0 sp 00007fffc62d8fd0 error 4 in libggadget-dbus-1.0.so.0.0.0[7f62b2788000+2b000] [ 327.449513] ggl-gtk[6844]: segfault at 0 ip 00007f2b6ebd8cd0 sp 00007fff8270f400 error 4 in libggadget-dbus-1.0.so.0.0.0[7f2b6ebbe000+2b000] [ 354.213327] ggl-gtk[6939]: segfault at 0 ip 00007f787ec29cd0 sp 00007fff9275ff80 error 4 in libggadget-dbus-1.0.so.0.0.0[7f787ec0f000+2b000] [ 374.445707] ggl-gtk[7007]: segfault at 0 ip 00007f6a11eaacd0 sp 00007fff259e3200 error 4 in libggadget-dbus-1.0.so.0.0.0[7f6a11e90000+2b000] [ 375.638897] ggl-gtk[7014]: segfault at 0 ip 00007f9ed2aebcd0 sp 00007fffe6621e40 error 4 in libggadget-dbus-1.0.so.0.0.0[7f9ed2ad1000+2b000] [ 376.503147] ggl-gtk[7019]: segfault at 0 ip 00007f49e6f5ccd0 sp 00007ffffaa932b0 error 4 in libggadget-dbus-1.0.so.0.0.0[7f49e6f42000+2b000] [ 377.410485] ggl-gtk[7254]: segfault at 0 ip 00007fbca7e77cd0 sp 00007fffbb9b01d0 error 4 in libggadget-dbus-1.0.so.0.0.0[7fbca7e5d000+2b000] [ 378.705794] ggl-gtk[7290]: segfault at 0 ip 00007fec396eacd0 sp 00007fff4d222a40 error 4 in libggadget-dbus-1.0.so.0.0.0[7fec396d0000+2b000] [ 380.330477] ggl-gtk[7299]: segfault at 0 ip 00007f2c90487cd0 sp 00007fffa3fc07e0 error 4 in libggadget-dbus-1.0.so.0.0.0[7f2c9046d000+2b000] [ 382.440559] ggl-gtk[7308]: segfault at 0 ip 00007f3210f7fcd0 sp 00007fff24ab62e0 error 4 in libggadget-dbus-1.0.so.0.0.0[7f3210f65000+2b000] [ 383.793492] ggl-gtk[7316]: segfault at 0 ip 00007feb72c97cd0 sp 00007fff867cdff0 error 4 in libggadget-dbus-1.0.so.0.0.0[7feb72c7d000+2b000] [ 385.225332] ggl-gtk[7323]: segfault at 0 ip 00007f979c78ccd0 sp 00007fffb02c2ae0 error 4 in libggadget-dbus-1.0.so.0.0.0[7f979c772000+2b000] [ 386.584733] ggl-gtk[7330]: segfault at 0 ip 00007f136698dcd0 sp 00007fff7a4c3ce0 error 4 in libggadget-dbus-1.0.so.0.0.0[7f1366973000+2b000] [ 387.386985] ggl-gtk[7337]: segfault at 0 ip 00007f03bf8c5cd0 sp 00007fffd33fdc20 error 4 in libggadget-dbus-1.0.so.0.0.0[7f03bf8ab000+2b000] [ 387.969826] ggl-gtk[7340]: segfault at 0 ip 00007f7e1bbaacd0 sp 00007fff2f6e2f00 error 4 in libggadget-dbus-1.0.so.0.0.0[7f7e1bb90000+2b000] [ 388.490261] ggl-gtk[7345]: segfault at 0 ip 00007f6cffa8ecd0 sp 00007fff135c6df0 error 4 in libggadget-dbus-1.0.so.0.0.0[7f6cffa74000+2b000] [ 388.987599] ggl-gtk[7350]: segfault at 0 ip 00007f1f67945cd0 sp 00007fff7b47dca0 error 4 in libggadget-dbus-1.0.so.0.0.0[7f1f6792b000+2b000] [ 642.076522] python[12460]: segfault at 7fb707de6c10 ip 00007fb707de6c10 sp 00007fb70f2c5118 error 14 -- Google Gadgets (GTK) , ubuntu tweak , crash in ubuntu 9.04 https://bugs.launchpad.net/bugs/319169 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
