Public bug reported: Hi,
I know this problem seems to be widely reported, but apparently there are many subltly different variants. In my case, I tried booting with acpi=off (gdm doesn't start in that case), apm=power-off, replacing halt by shutdown, rmmoding sdn-hda- intel, but notthing worked. In fact, I saw that /etc/rc0.d/S90halt is never executed (I disabled usplash and inserted an echo line at start). As I don't know how to find my way in the boot scripts, I can't tell you more. I have an up-to-date ubuntu 8.10, installed from scratch (not an update). Here's an lspci + dmesg: 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller 01:00.0 VGA compatible controller: ATI Technologies Inc RV530 [Radeon X1600] 01:00.1 Display controller: ATI Technologies Inc RV530 [Radeon X1600] (Secondary) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) 03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b1) 05:02.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 14) 05:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-9-generic (bui...@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 22:15:32 UTC 2008 (Ubuntu 2.6.27-9.19-generic) [ 0.000000] Command line: root=UUID=a2861b75-b19c-450d-bd39-3b5a5f8e6ef2 ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable) [ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xcff70 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff70000 page 4k [ 0.000000] kernel direct mapping tables up to cff70000 @ 8000-e000 [ 0.000000] last_map_addr: cff70000 end: cff70000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000 [ 0.000000] last_map_addr: 130000000 end: 130000000 [ 0.000000] RAMDISK: 377af000 - 37fefbe4 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000FB030, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFF70000, 003C (r1 A_M_I_ OEMRSDT 7000823 MSFT 97) [ 0.000000] ACPI: FACP CFF70200, 0084 (r2 A_M_I_ OEMFACP 7000823 MSFT 97) [ 0.000000] ACPI: DSDT CFF70440, 963E (r1 A0999 A0999001 1 INTL 20060113) [ 0.000000] ACPI: FACS CFF7E000, 0040 [ 0.000000] ACPI: APIC CFF70390, 006C (r1 A_M_I_ OEMAPIC 7000823 MSFT 97) [ 0.000000] ACPI: MCFG CFF70400, 003C (r1 A_M_I_ OEMMCFG 7000823 MSFT 97) [ 0.000000] ACPI: OEMB CFF7E040, 0081 (r1 A_M_I_ AMI_OEM 7000823 MSFT 97) [ 0.000000] ACPI: HPET CFF79A80, 0038 (r1 A_M_I_ OEMHPET 7000823 MSFT 97) [ 0.000000] ACPI: OSFR CFF79AC0, 00B0 (r1 A_M_I_ OEMOSFR 7000823 MSFT 97) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [000000000000d000 - 0000000000032fff] pages 26 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c] [ 0.000000] #3 [00377af000 - 0037fefbe4] RAMDISK ==> [00377af000 - 0037fefbe4] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ 0.000000] [ffffe20000000000-ffffe20004bfffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000cff70 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048333 [ 0.000000] DMA zone: 2105 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 831408 pages, LIFO batch:31 [ 0.000000] Normal zone: 193536 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000 [ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000 [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027049 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=a2861b75-b19c-450d-bd39-3b5a5f8e6ef2 ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 3166.293 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.004000] Memory: 4045992k/4980736k available (3112k kernel code, 147340k reserved, 1575k data, 536k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6332.58 BogoMIPS (lpj=12665172) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 0/0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] CPU0: Thermal monitoring enabled (TM2) [ 0.004000] using mwait in idle threads. [ 0.004010] ACPI: Core revision 20080609 [ 0.006383] ACPI: Checking initramfs for custom DSDT [ 0.252374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.295392] CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a [ 0.295466] Using local APIC timer interrupts. [ 0.296019] APIC timer calibration result 20830934 [ 0.296020] Detected 20.830 MHz APIC timer. [ 0.296126] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 6332.61 BogoMIPS (lpj=12665220) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.384763] CPU1: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a [ 0.385063] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.388048] Brought up 2 CPUs [ 0.388076] Total of 2 processors activated (12665.19 BogoMIPS). [ 0.388141] CPU0 attaching sched-domain: [ 0.388142] domain 0: span 0-1 level MC [ 0.388144] groups: 0 1 [ 0.388146] domain 1: span 0-1 level NODE [ 0.388147] groups: 0-1 [ 0.388150] CPU1 attaching sched-domain: [ 0.388151] domain 0: span 0-1 level MC [ 0.388152] groups: 1 0 [ 0.388153] domain 1: span 0-1 level NODE [ 0.388154] groups: 0-1 [ 0.388213] net_namespace: 1552 bytes [ 0.388213] Booting paravirtualized kernel on bare hardware [ 0.388253] Time: 14:22:58 Date: 01/25/09 [ 0.388299] NET: Registered protocol family 16 [ 0.388336] ACPI: bus type pci registered [ 0.388336] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.388336] PCI: Not using MMCONFIG. [ 0.388336] PCI: Using configuration type 1 for base access [ 0.388581] ACPI: EC: Look up EC in DSDT [ 0.401960] ACPI: Interpreter enabled [ 0.401988] ACPI: (supports S0 S1 S3 S4 S5) [ 0.402135] ACPI: Using IOAPIC for interrupt routing [ 0.402205] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.404476] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.409796] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.416113] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.416125] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.416125] pci 0000:00:01.0: PME# disabled [ 0.416171] PCI: 0000:00:1a.0 reg 20 io port: [a800, a81f] [ 0.416217] PCI: 0000:00:1a.1 reg 20 io port: [a880, a89f] [ 0.416264] PCI: 0000:00:1a.2 reg 20 io port: [ac00, ac1f] [ 0.416313] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fe7ffc00, fe7fffff] [ 0.416349] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.416379] pci 0000:00:1a.7: PME# disabled [ 0.416428] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fe7f8000, fe7fbfff] [ 0.416454] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.416483] pci 0000:00:1b.0: PME# disabled [ 0.416543] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.416572] pci 0000:00:1c.0: PME# disabled [ 0.416634] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.416663] pci 0000:00:1c.4: PME# disabled [ 0.416723] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.416753] pci 0000:00:1c.5: PME# disabled [ 0.416811] PCI: 0000:00:1d.0 reg 20 io port: [a080, a09f] [ 0.416857] PCI: 0000:00:1d.1 reg 20 io port: [a400, a41f] [ 0.416903] PCI: 0000:00:1d.2 reg 20 io port: [a480, a49f] [ 0.416952] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fe7ff800, fe7ffbff] [ 0.416988] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.417018] pci 0000:00:1d.7: PME# disabled [ 0.417149] PCI: 0000:00:1f.2 reg 10 io port: [9000, 9007] [ 0.417153] PCI: 0000:00:1f.2 reg 14 io port: [8c00, 8c03] [ 0.417157] PCI: 0000:00:1f.2 reg 18 io port: [8880, 8887] [ 0.417161] PCI: 0000:00:1f.2 reg 1c io port: [8800, 8803] [ 0.417164] PCI: 0000:00:1f.2 reg 20 io port: [8480, 848f] [ 0.417168] PCI: 0000:00:1f.2 reg 24 io port: [8400, 840f] [ 0.417193] PCI: 0000:00:1f.3 reg 10 64bit mmio: [fe7ff400, fe7ff4ff] [ 0.417203] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f] [ 0.417232] PCI: 0000:00:1f.5 reg 10 io port: [a000, a007] [ 0.417236] PCI: 0000:00:1f.5 reg 14 io port: [9c00, 9c03] [ 0.417240] PCI: 0000:00:1f.5 reg 18 io port: [9880, 9887] [ 0.417244] PCI: 0000:00:1f.5 reg 1c io port: [9800, 9803] [ 0.417247] PCI: 0000:00:1f.5 reg 20 io port: [9480, 948f] [ 0.417251] PCI: 0000:00:1f.5 reg 24 io port: [9400, 940f] [ 0.417281] PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, dfffffff] [ 0.417289] PCI: 0000:01:00.0 reg 18 64bit mmio: [fe8e0000, fe8effff] [ 0.417293] PCI: 0000:01:00.0 reg 20 io port: [b000, b0ff] [ 0.417299] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe8c0000, fe8dffff] [ 0.417309] pci 0000:01:00.0: supports D1 [ 0.417310] pci 0000:01:00.0: supports D2 [ 0.417326] PCI: 0000:01:00.1 reg 10 64bit mmio: [fe8f0000, fe8fffff] [ 0.417347] pci 0000:01:00.1: supports D1 [ 0.417348] pci 0000:01:00.1: supports D2 [ 0.417374] PCI: bridge 0000:00:01.0 io port: [b000, bfff] [ 0.417376] PCI: bridge 0000:00:01.0 32bit mmio: [fe800000, fe8fffff] [ 0.417379] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff] [ 0.417411] PCI: bridge 0000:00:1c.0 64bit mmio pref: [fdf00000, fdffffff] [ 0.417447] PCI: 0000:03:00.0 reg 10 io port: [dc00, dc07] [ 0.417453] PCI: 0000:03:00.0 reg 14 io port: [d880, d883] [ 0.417459] PCI: 0000:03:00.0 reg 18 io port: [d800, d807] [ 0.417465] PCI: 0000:03:00.0 reg 1c io port: [d480, d483] [ 0.417471] PCI: 0000:03:00.0 reg 20 io port: [d400, d40f] [ 0.417477] PCI: 0000:03:00.0 reg 24 32bit mmio: [feaffc00, feafffff] [ 0.417502] pci 0000:03:00.0: supports D1 [ 0.417503] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.417533] pci 0000:03:00.0: PME# disabled [ 0.417583] PCI: bridge 0000:00:1c.4 io port: [d000, dfff] [ 0.417585] PCI: bridge 0000:00:1c.4 32bit mmio: [fea00000, feafffff] [ 0.417636] PCI: 0000:02:00.0 reg 10 64bit mmio: [fe9fc000, fe9fffff] [ 0.417642] PCI: 0000:02:00.0 reg 18 io port: [c800, c8ff] [ 0.417663] PCI: 0000:02:00.0 reg 30 32bit mmio: [fe9c0000, fe9dffff] [ 0.417679] pci 0000:02:00.0: supports D1 [ 0.417680] pci 0000:02:00.0: supports D2 [ 0.417681] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.417711] pci 0000:02:00.0: PME# disabled [ 0.417761] PCI: bridge 0000:00:1c.5 io port: [c000, cfff] [ 0.417763] PCI: bridge 0000:00:1c.5 32bit mmio: [fe900000, fe9fffff] [ 0.417799] PCI: 0000:05:02.0 reg 10 32bit mmio: [febfc000, febfffff] [ 0.417804] PCI: 0000:05:02.0 reg 14 io port: [e800, e8ff] [ 0.417825] PCI: 0000:05:02.0 reg 30 32bit mmio: [febc0000, febdffff] [ 0.417837] pci 0000:05:02.0: supports D1 [ 0.417837] pci 0000:05:02.0: supports D2 [ 0.417838] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.417869] pci 0000:05:02.0: PME# disabled [ 0.417916] PCI: 0000:05:03.0 reg 10 32bit mmio: [febfb000, febfbfff] [ 0.417949] pci 0000:05:03.0: supports D1 [ 0.417950] pci 0000:05:03.0: supports D2 [ 0.417951] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot [ 0.417980] pci 0000:05:03.0: PME# disabled [ 0.418035] pci 0000:00:1e.0: transparent bridge [ 0.418064] PCI: bridge 0000:00:1e.0 io port: [e000, efff] [ 0.418066] PCI: bridge 0000:00:1e.0 32bit mmio: [feb00000, febfffff] [ 0.418087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.418270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.418349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.418467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.418545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.418634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.432748] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.432895] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.433288] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.433681] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.434074] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.434515] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.436329] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.437252] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.437589] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - C0, should be BF [20080609] [ 0.437589] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.437589] pnp: PnP ACPI init [ 0.437589] ACPI: bus type pnp registered [ 0.440293] pnp: PnP ACPI: found 15 devices [ 0.440321] ACPI: ACPI bus type pnp unregistered [ 0.440356] PCI: Using ACPI for IRQ routing [ 0.464037] NET: Registered protocol family 8 [ 0.464068] NET: Registered protocol family 20 [ 0.464109] NetLabel: Initializing [ 0.464109] NetLabel: domain hash size = 128 [ 0.464109] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.464145] NetLabel: unlabeled traffic allowed by default [ 0.464183] PCI-GART: No AMD northbridge found. [ 0.464213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.464353] hpet0: 4 64-bit timers, 14318180 Hz [ 0.466874] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.466902] actual entries 65586 [ 0.466977] AppArmor: AppArmor Filesystem Enabled [ 0.467019] ACPI: RTC can wake from S4 [ 0.480017] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.480054] system 00:06: ioport range 0x290-0x29f has been reserved [ 0.480089] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.480120] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.480151] system 00:07: ioport range 0x500-0x57f has been reserved [ 0.480187] system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved [ 0.480216] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.480244] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.480273] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.480304] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved [ 0.480334] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.480363] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.480396] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.480427] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.480455] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.480484] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.480512] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved [ 0.485338] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.485367] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.485395] pci 0000:00:01.0: MEM window: 0xfe800000-0xfe8fffff [ 0.485424] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.485457] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.485485] pci 0000:00:1c.0: IO window: disabled [ 0.485514] pci 0000:00:1c.0: MEM window: disabled [ 0.485543] pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.485578] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.485606] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 0.485636] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff [ 0.485666] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.485696] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 0.485725] pci 0000:00:1c.5: IO window: 0xc000-0xcfff [ 0.485755] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff [ 0.485784] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.485815] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.485843] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.485873] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff [ 0.485902] pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f00fffff [ 0.485941] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.485970] pci 0000:00:01.0: setting latency timer to 64 [ 0.485975] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.486005] pci 0000:00:1c.0: setting latency timer to 64 [ 0.486010] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.486039] pci 0000:00:1c.4: setting latency timer to 64 [ 0.486044] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.486074] pci 0000:00:1c.5: setting latency timer to 64 [ 0.486078] pci 0000:00:1e.0: setting latency timer to 64 [ 0.486080] bus: 00 index 0 io port: [0, ffff] [ 0.486107] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.486135] bus: 01 index 0 io port: [b000, bfff] [ 0.486163] bus: 01 index 1 mmio: [fe800000, fe8fffff] [ 0.486191] bus: 01 index 2 mmio: [d0000000, dfffffff] [ 0.486219] bus: 01 index 3 mmio: [0, 0] [ 0.486246] bus: 04 index 0 mmio: [0, 0] [ 0.486273] bus: 04 index 1 mmio: [0, 0] [ 0.486300] bus: 04 index 2 mmio: [fdf00000, fdffffff] [ 0.486328] bus: 04 index 3 mmio: [0, 0] [ 0.486355] bus: 03 index 0 io port: [d000, dfff] [ 0.486383] bus: 03 index 1 mmio: [fea00000, feafffff] [ 0.486411] bus: 03 index 2 mmio: [0, 0] [ 0.486438] bus: 03 index 3 mmio: [0, 0] [ 0.486465] bus: 02 index 0 io port: [c000, cfff] [ 0.486493] bus: 02 index 1 mmio: [fe900000, fe9fffff] [ 0.486521] bus: 02 index 2 mmio: [0, 0] [ 0.486548] bus: 02 index 3 mmio: [0, 0] [ 0.486575] bus: 05 index 0 io port: [e000, efff] [ 0.486603] bus: 05 index 1 mmio: [feb00000, febfffff] [ 0.486631] bus: 05 index 2 mmio: [f0000000, f00fffff] [ 0.486659] bus: 05 index 3 io port: [0, ffff] [ 0.486686] bus: 05 index 4 mmio: [0, ffffffffffffffff] [ 0.486719] NET: Registered protocol family 2 [ 0.501080] Switched to high resolution mode on CPU 1 [ 0.503964] Switched to high resolution mode on CPU 0 [ 0.524143] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.524919] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.527301] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.527693] TCP: Hash tables configured (established 524288 bind 65536) [ 0.527721] TCP reno registered [ 0.536098] NET: Registered protocol family 1 [ 0.536216] checking if image is initramfs... it is [ 1.023220] Freeing initrd memory: 8450k freed [ 1.025842] audit: initializing netlink socket (disabled) [ 1.025890] type=2000 audit(1232893378.024:1): initialized [ 1.029788] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.031254] VFS: Disk quotas dquot_6.5.1 [ 1.031329] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.031419] msgmni has been set to 7918 [ 1.031515] io scheduler noop registered [ 1.031543] io scheduler anticipatory registered [ 1.031570] io scheduler deadline registered [ 1.031666] io scheduler cfq registered (default) [ 1.031798] pci 0000:01:00.0: Boot video device [ 1.031873] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.031891] pcieport-driver 0000:00:01.0: found MSI capability [ 1.031935] pci_express 0000:00:01.0:pcie00: allocate port service [ 1.031961] pci_express 0000:00:01.0:pcie03: allocate port service [ 1.032009] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.032032] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.032082] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.032105] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.032129] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.032185] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.032208] pcieport-driver 0000:00:1c.4: found MSI capability [ 1.032258] pci_express 0000:00:1c.4:pcie00: allocate port service [ 1.032280] pci_express 0000:00:1c.4:pcie02: allocate port service [ 1.032304] pci_express 0000:00:1c.4:pcie03: allocate port service [ 1.032362] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 1.032385] pcieport-driver 0000:00:1c.5: found MSI capability [ 1.032434] pci_express 0000:00:1c.5:pcie00: allocate port service [ 1.032459] pci_express 0000:00:1c.5:pcie02: allocate port service [ 1.032481] pci_express 0000:00:1c.5:pcie03: allocate port service [ 1.050773] hpet_resources: 0xfed00000 is busy [ 1.050819] Linux agpgart interface v0.103 [ 1.050851] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.050983] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.051412] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.052442] brd: module loaded [ 1.052513] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.052647] PNP: No PS/2 controller found. Probing ports directly. [ 1.055336] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.055366] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.076629] mice: PS/2 mouse device common for all mice [ 1.076736] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.076783] rtc0: alarms up to one month, y3k, hpet irqs [ 1.076833] cpuidle: using governor ladder [ 1.076861] cpuidle: using governor menu [ 1.077111] TCP cubic registered [ 1.077247] registered taskstats version 1 [ 1.077361] Magic number: 9:155:385 [ 1.077424] pci_express 0000:00:1c.4:pcie00: hash matches [ 1.077480] rtc_cmos 00:03: setting system clock to 2009-01-25 14:22:58 UTC (1232893378) [ 1.077512] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.077540] EDD information not available. [ 1.077589] Freeing unused kernel memory: 536k freed [ 1.077758] Write protecting the kernel read-only data: 4348k [ 1.142504] fuse init (API version 7.9) [ 1.152802] processor ACPI0007:00: registered as cooling_device0 [ 1.152869] processor ACPI0007:01: registered as cooling_device1 [ 1.283090] usbcore: registered new interface driver usbfs [ 1.283135] usbcore: registered new interface driver hub [ 1.283191] usbcore: registered new device driver usb [ 1.283312] No dock devices found. [ 1.290191] SCSI subsystem initialized [ 1.305988] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.306026] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.306029] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.306081] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.310010] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.310040] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.310051] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00 [ 1.313984] libata version 3.00 loaded. [ 1.314030] USB Universal Host Controller Interface driver v3.0 [ 1.324508] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.324629] usb usb1: configuration #1 chosen from 1 choice [ 1.324671] hub 1-0:1.0: USB hub found [ 1.324703] hub 1-0:1.0: 6 ports detected [ 1.428681] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.428718] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.428721] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.428762] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 1.429193] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 [ 1.429273] usb usb2: configuration #1 chosen from 1 choice [ 1.429316] hub 2-0:1.0: USB hub found [ 1.429348] hub 2-0:1.0: 2 ports detected [ 1.532741] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.532783] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.532785] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.532828] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 1.532885] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 [ 1.532969] usb usb3: configuration #1 chosen from 1 choice [ 1.533013] hub 3-0:1.0: USB hub found [ 1.533044] hub 3-0:1.0: 2 ports detected [ 1.636273] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.636309] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.636311] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.636352] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 1.636402] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00 [ 1.636482] usb usb4: configuration #1 chosen from 1 choice [ 1.636528] hub 4-0:1.0: USB hub found [ 1.636558] hub 4-0:1.0: 2 ports detected [ 1.740381] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.740418] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.740420] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.740460] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 1.744394] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.744424] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.744433] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800 [ 1.756008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.756102] usb usb5: configuration #1 chosen from 1 choice [ 1.756155] hub 5-0:1.0: USB hub found [ 1.756191] hub 5-0:1.0: 6 ports detected [ 1.964700] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.964732] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.964734] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.964774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.964823] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 [ 1.964899] usb usb6: configuration #1 chosen from 1 choice [ 1.964940] hub 6-0:1.0: USB hub found [ 1.964970] hub 6-0:1.0: 2 ports detected [ 2.076010] usb 5-1: new high speed USB device using ehci_hcd and address 2 [ 2.172732] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.172764] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.172766] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.172807] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.172860] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 [ 2.172937] usb usb7: configuration #1 chosen from 1 choice [ 2.172978] hub 7-0:1.0: USB hub found [ 2.173008] hub 7-0:1.0: 2 ports detected [ 2.208443] usb 5-1: configuration #1 chosen from 1 choice [ 2.208840] hub 5-1:1.0: USB hub found [ 2.209184] hub 5-1:1.0: 4 ports detected [ 2.380770] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.380802] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.380804] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.380845] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.380893] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 [ 2.380973] usb usb8: configuration #1 chosen from 1 choice [ 2.381015] hub 8-0:1.0: USB hub found [ 2.381047] hub 8-0:1.0: 2 ports detected [ 2.486043] ata_piix 0000:00:1f.2: version 2.12 [ 2.486051] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.486081] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 2.486244] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.486280] scsi0 : ata_piix [ 2.486363] scsi1 : ata_piix [ 2.487350] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19 [ 2.487381] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19 [ 2.960059] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.980008] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 3.014869] ata1.01: ATA-7: MAXTOR STM3160815AS, 4.AAB, max UDMA/133 [ 3.014901] ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.081507] ata1.01: configured for UDMA/133 [ 3.157929] usb 6-2: configuration #1 chosen from 1 choice [ 3.400505] usb 7-2: new full speed USB device using uhci_hcd and address 2 [ 3.410583] ata2: SATA link down (SStatus 0 SControl 300) [ 3.410677] scsi 0:0:1:0: Direct-Access ATA MAXTOR STM316081 4.AA PQ: 0 ANSI: 5 [ 3.411763] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.412202] pata_marvell 0000:03:00.0: setting latency timer to 64 [ 3.412970] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.413001] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 3.413161] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 3.413180] scsi2 : pata_marvell [ 3.413514] scsi3 : ata_piix [ 3.413785] scsi4 : pata_marvell [ 3.413834] ata3: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16 [ 3.413863] ata4: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16 [ 3.414254] scsi5 : ata_piix [ 3.415144] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19 [ 3.415174] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19 [ 3.577003] usb 7-2: configuration #1 chosen from 1 choice [ 3.586395] ata3.00: ATA-7: Maxtor 6L300R0, BAH41E00, max UDMA/133 [ 3.586428] ata3.00: 586114704 sectors, multi 0: LBA48 [ 3.586469] ata3.01: ATAPI: _NEC DVD_RW ND-1300A, 1.08, max UDMA/33 [ 3.601928] ata3.00: configured for UDMA/100 [ 3.616885] ata3.01: configured for UDMA/33 [ 3.652164] usb 5-1.1: new high speed USB device using ehci_hcd and address 5 [ 3.742543] ata5: SATA link down (SStatus 0 SControl 300) [ 3.748957] usb 5-1.1: configuration #1 chosen from 1 choice [ 3.749814] usbcore: registered new interface driver hiddev [ 3.763117] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1 [ 3.783628] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L300R0 BAH4 PQ: 0 ANSI: 5 [ 3.788046] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2 [ 3.788301] scsi 2:0:1:0: CD-ROM _NEC DVD_RW ND-1300A 1.08 PQ: 0 ANSI: 5 [ 3.788385] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.788421] sky2 0000:02:00.0: setting latency timer to 64 [ 3.788435] sky2 0000:02:00.0: v1.22 addr 0xfe9fc000 irq 17 Yukon-2 EC Ultra rev 3 [ 3.788727] sky2 eth0: addr 00:22:15:63:b9:e6 [ 3.788771] skge 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.788826] skge 1.13 addr 0xfebfc000 irq 18 chip Yukon-Lite rev 9 [ 3.789133] skge eth1: addr 00:22:15:63:d4:b5 [ 3.816887] Fixing up Logitech keyboard report descriptor [ 3.817476] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input2 [ 3.840100] input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2 [ 3.840295] usbcore: registered new interface driver usbhid [ 3.840324] usbhid: v2.6:USB HID core driver [ 3.840326] usbcore: registered new interface driver libusual [ 3.843138] Initializing USB Mass Storage driver... [ 3.843212] scsi6 : SCSI emulation for USB Mass Storage devices [ 3.843285] usbcore: registered new interface driver usb-storage [ 3.843314] USB Mass Storage support registered. [ 3.843398] usb-storage: device found at 5 [ 3.843399] usb-storage: waiting for device to settle before scanning [ 3.851825] scsi 0:0:1:0: Attached scsi generic sg0 type 0 [ 3.851873] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.851920] scsi 2:0:1:0: Attached scsi generic sg2 type 5 [ 4.070534] ata6: SATA link down (SStatus 0 SControl 300) [ 4.071150] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.122846] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febfb000-febfb7ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 4.150269] Driver 'sr' needs updating - please use bus_type methods [ 4.153099] Driver 'sd' needs updating - please use bus_type methods [ 4.153172] sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 4.153210] sd 0:0:1:0: [sda] Write Protect is off [ 4.153238] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 4.153255] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.153328] sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 4.153365] sd 0:0:1:0: [sda] Write Protect is off [ 4.153393] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 4.153410] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.153443] sda:sr0: scsi3-mmc drive: 32x/40x writer cd/rw xa/form2 cdda tray [ 4.154052] Uniform CD-ROM driver Revision: 3.20 [ 4.154121] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 4.179010] sda1 sda2 sda3 [ 4.194033] sd 0:0:1:0: [sda] Attached SCSI disk [ 4.196639] sd 2:0:0:0: [sdb] 586114704 512-byte hardware sectors (300091 MB) [ 4.196688] sd 2:0:0:0: [sdb] Write Protect is off [ 4.196716] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.196734] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.196799] sd 2:0:0:0: [sdb] 586114704 512-byte hardware sectors (300091 MB) [ 4.196837] sd 2:0:0:0: [sdb] Write Protect is off [ 4.196865] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.196883] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.196916] sdb: sdb3 [ 4.219042] sd 2:0:0:0: [sdb] Attached SCSI disk [ 5.401132] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001654989] [ 8.840193] usb-storage: device scan complete [ 8.840572] scsi 6:0:0:0: Direct-Access Philips GoGear Spark 0100 PQ: 0 ANSI: 4 [ 8.842177] sd 6:0:0:0: [sdc] 963328 4096-byte hardware sectors (3946 MB) [ 8.842940] sd 6:0:0:0: [sdc] Write Protect is off [ 8.842969] sd 6:0:0:0: [sdc] Mode Sense: 3e 00 00 00 [ 8.842970] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 8.844430] sd 6:0:0:0: [sdc] 963328 4096-byte hardware sectors (3946 MB) [ 8.844928] sd 6:0:0:0: [sdc] Write Protect is off [ 8.844956] sd 6:0:0:0: [sdc] Mode Sense: 3e 00 00 00 [ 8.844957] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 8.844986] sdc: sdc1 [ 8.846787] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 8.846882] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 9.437271] EXT3-fs: INFO: recovery required on readonly filesystem. [ 9.437304] EXT3-fs: write access will be enabled during recovery. [ 9.525473] kjournald starting. Commit interval 5 seconds [ 9.525517] EXT3-fs: recovery complete. [ 9.526430] EXT3-fs: mounted filesystem with ordered data mode. [ 15.452452] udevd version 124 started [ 15.712380] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 15.715208] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.797228] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 15.820515] ACPI: Power Button (FF) [PWRF] [ 15.820608] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 15.848512] ACPI: Power Button (CM) [PWRB] [ 16.350759] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.350812] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.375173] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 16.383450] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... [ 16.504403] end_request: I/O error, dev sr0, sector 0 [ 16.504436] Buffer I/O error on device sr0, logical block 0 [ 16.504466] Buffer I/O error on device sr0, logical block 1 [ 16.504494] Buffer I/O error on device sr0, logical block 2 [ 16.504541] Buffer I/O error on device sr0, logical block 3 [ 16.507247] end_request: I/O error, dev sr0, sector 0 [ 16.507276] Buffer I/O error on device sr0, logical block 0 [ 17.451752] lp: driver loaded but no devices found [ 17.958868] EXT3 FS on sda2, internal journal [ 18.460162] kjournald starting. Commit interval 5 seconds [ 18.460371] EXT3 FS on sdb3, internal journal [ 18.460375] EXT3-fs: mounted filesystem with ordered data mode. [ 18.533046] type=1505 audit(1232889796.185:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4299 [ 18.610287] type=1505 audit(1232889796.261:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4304 [ 18.610389] type=1505 audit(1232889796.261:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4304 [ 18.708208] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.329413] ACPI: WMI: Mapper loaded [ 20.025657] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 20.265185] NET: Registered protocol family 10 [ 20.265456] lo: Disabled Privacy Extensions [ 20.432954] ppdev: user-space parallel port driver [ 20.792641] RPC: Registered udp transport module. [ 20.792643] RPC: Registered tcp transport module. [ 20.882688] Installing knfsd (copyright (C) 1996 [email protected]). [ 20.942009] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 20.958780] NFSD: starting 90-second grace period [ 24.865642] Bluetooth: Core ver 2.13 [ 24.866759] NET: Registered protocol family 31 [ 24.866761] Bluetooth: HCI device and connection manager initialized [ 24.866763] Bluetooth: HCI socket layer initialized [ 24.872304] Bluetooth: L2CAP ver 2.11 [ 24.872306] Bluetooth: L2CAP socket layer initialized [ 24.889298] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.889301] Bluetooth: BNEP filters: protocol multicast [ 24.920638] Bridge firewalling registered [ 24.921081] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 24.926298] Bluetooth: SCO (Voice Link) ver 0.6 [ 24.926300] Bluetooth: SCO socket layer initialized [ 25.044298] Bluetooth: RFCOMM socket layer initialized [ 25.044578] Bluetooth: RFCOMM TTY layer initialized [ 25.044581] Bluetooth: RFCOMM ver 1.10 [ 25.938242] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 26.070376] [drm] Initialized drm 1.1.0 20060810 [ 26.085011] pci 0000:01:00.0: setting latency timer to 64 [ 26.085396] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 26.085934] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 26.294867] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 26.361845] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 26.361992] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 26.362419] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 26.384710] [drm] Setting GART location based on new memory map [ 26.385833] [drm] Loading R500 Microcode [ 26.385865] [drm] Num pipes: 1 [ 26.385871] [drm] writeback test succeeded in 1 usecs [ 29.120803] skge eth1: enabling interface [ 29.124239] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 29.125097] sky2 eth0: enabling interface [ 29.128423] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.026978] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 32.027509] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.209578] NET: Registered protocol family 17 [ 36.898402] UDF-fs: No VRS found [ 36.958586] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 36.960326] ISOFS: changing to secondary root [ 42.064005] eth0: no IPv6 routers present ** Affects: ubuntu Importance: Undecided Status: New -- 8.10: no reboot, no shutdown https://bugs.launchpad.net/bugs/321132 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
