I have/had the same problem with my Lacie disk,
but I was able to manually mount the disk after the following steps:

# modprobe -r sbp2
# modprobe sbp2
# dmesg | tail -33
>>>
[ 5133.273353] ieee1394: The root node is not cycle master capable; selecting a 
new root node and resetting...
[ 5134.224157] ieee1394: Error parsing configrom for node 0-00:1023
[ 5134.224564] ieee1394: Host added: ID:BUS[0-01:1023]  GUID[0a0007e42002fee6]
[ 5135.768775] ieee1394: Node added: ID:BUS[0-00:1023]  GUID[00d04b8a19091491]
[ 5135.777460] scsi6 : SBP-2 IEEE-1394
[ 5156.781206] ieee1394: sbp2: Error logging into SBP-2 device - timed out
[ 5156.787133] sbp2: probe of 00d04b8a19091491-1 failed with error -16
[ 5156.787365] scsi7 : SBP-2 IEEE-1394
[ 5177.788056] ieee1394: sbp2: Error logging into SBP-2 device - timed out
[ 5177.792624] sbp2: probe of 00d04b8a19091491-1 failed with error -16
[ 5178.068553] ieee1394: The root node is not cycle master capable; selecting a 
new root node and resetting...
[ 5178.347593] scsi8 : SBP-2 IEEE-1394
[ 5199.353088] ieee1394: sbp2: Error logging into SBP-2 device - timed out
[ 5199.357478] sbp2: probe of 00d04b8a19091491-1 failed with error -16
[ 6092.986845] scsi9 : SBP-2 IEEE-1394
[ 6114.004171] ieee1394: sbp2: Error logging into SBP-2 device - timed out
[ 6114.006059] sbp2: probe of 00d04b8a19091491-1 failed with error -16


# modprobe -r ohci1394
(wait a few seconds)
# modprobe ohci1394
# dmesg | tail -33
>>>
[ 6200.401162] ieee1394: Node removed: ID:BUS[0-01:1023]  GUID[0a0007e42002fee6]
[ 6200.406680] ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[00d04b8a19091491]
[ 6210.547841] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  
MMIO=[e4301000-e43017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[ 6211.828193] ieee1394: Node added: ID:BUS[0-00:1023]  GUID[00d04b8a19091491]
[ 6211.833650] ieee1394: Host added: ID:BUS[0-01:1023]  GUID[0a0007e42002fee6]
[ 6211.843279] scsi10 : SBP-2 IEEE-1394
[ 6213.103374] ieee1394: sbp2: Logged into SBP-2 device
[ 6213.104776] ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload 
[2048]
[ 6213.110287] scsi 10:0:1:0: Direct-Access     LaCie    little Disk           
PQ: 0 ANSI: 4
[ 6213.116325] sd 10:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 
MB)
[ 6213.120356] sd 10:0:1:0: [sdb] Write Protect is off
[ 6213.120368] sd 10:0:1:0: [sdb] Mode Sense: 10 00 00 00
[ 6213.123004] sd 10:0:1:0: [sdb] Cache data unavailable
[ 6213.123014] sd 10:0:1:0: [sdb] Assuming drive cache: write through
[ 6213.128087] sd 10:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 
MB)
[ 6213.131269] sd 10:0:1:0: [sdb] Write Protect is off
[ 6213.131282] sd 10:0:1:0: [sdb] Mode Sense: 10 00 00 00
[ 6213.142059] sd 10:0:1:0: [sdb] Cache data unavailable
[ 6213.142072] sd 10:0:1:0: [sdb] Assuming drive cache: write through
[ 6213.142649]  sdb: sdb1
[ 6213.169596] sd 10:0:1:0: [sdb] Attached SCSI disk
[ 6213.170110] sd 10:0:1:0: Attached scsi generic sg2 type 0


I have a thinkpad R60 running intrepid 64bit:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 
945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT 
Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition 
Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 
(rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 
(rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 
(rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 
(rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge 
(rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller 
(rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI 
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit 
Ethernet PCI Express (rev 21)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] 
Network Connection (rev 02)
15:00.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
15:00.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 
1394 Host Controller

-- 
External ieee1394 drive not recognized 2.6.27-5
https://bugs.launchpad.net/bugs/279342
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to